* Note: this flag may cause less information about currently installed * applications to be returned. */ public static final int GET_UNINSTALLED_PACKAGES = 0x00002000; /** * {@link PackageInfo} flag: return information about * hardware preferences in * {@link PackageInfo#configPreferences PackageInfo.configPreferences}, * and requested features in {@link PackageInfo#reqFeatures} and * {@link PackageInfo#featureGroups}. */ public static final int GET_CONFIGURATIONS = 0x00004000; /** * {@link PackageInfo} flag: include disabled components which are in * that state only because of {@link #COMPONENT_ENABLED_STATE_DISABLED_UNTIL_USED} * in the returned info. Note that if you set this flag, applications * that are in this disabled state will be reported as enabled. */ public static final int GET_DISABLED_UNTIL_USED_COMPONENTS = 0x00008000; /** * Resolution and querying flag: if set, only filters that support the * {@link android.content.Intent#CATEGORY_DEFAULT} will be considered for * matching. This is a synonym for including the CATEGORY_DEFAULT in your * supplied Intent. */ public static final int MATCH_DEFAULT_ONLY = 0x00010000; /** * Querying flag: if set and if the platform is doing any filtering of the results, then * the filtering will not happen. This is a synonym for saying that all results should * be returned. */ public static final int MATCH_ALL = 0x00020000; /** * Flag for {@link addCrossProfileIntentFilter}: if this flag is set: * when resolving an intent that matches the {@link CrossProfileIntentFilter}, the current * profile will be skipped. * Only activities in the target user can respond to the intent. * @hide */ public static final int SKIP_CURRENT_PROFILE = 0x00000002; /** @hide */ @IntDef({PERMISSION_GRANTED, PERMISSION_DENIED}) @Retention(RetentionPolicy.SOURCE) public @interface PermissionResult {} /** * Permission check result: this is returned by {@link #checkPermission} * if the permission has been granted to the given package. */ public static final int PERMISSION_GRANTED = 0; /** * Permission check result: this is returned by {@link #checkPermission} * if the permission has not been granted to the given package. */ public static final int PERMISSION_DENIED = -1; /** * Signature check result: this is returned by {@link #checkSignatures} * if all signatures on the two packages match. */ public static final int SIGNATURE_MATCH = 0; /** * Signature check result: this is returned by {@link #checkSignatures} * if neither of the two packages is signed. */ public static final int SIGNATURE_NEITHER_SIGNED = 1; /** * Signature check result: this is returned by {@link #checkSignatures} * if the first package is not signed but the second is. */ public static final int SIGNATURE_FIRST_NOT_SIGNED = -1; /** * Signature check result: this is returned by {@link #checkSignatures} * if the second package is not signed but the first is. */ public static final int SIGNATURE_SECOND_NOT_SIGNED = -2; /** * Signature check result: this is returned by {@link #checkSignatures} * if not all signatures on both packages match. */ public static final int SIGNATURE_NO_MATCH = -3; /** * Signature check result: this is returned by {@link #checkSignatures} * if either of the packages are not valid. */ public static final int SIGNATURE_UNKNOWN_PACKAGE = -4; /** * Flag for {@link #setApplicationEnabledSetting(String, int, int)} * and {@link #setComponentEnabledSetting(ComponentName, int, int)}: This * component or application is in its default enabled state (as specified * in its manifest). */ public static final int COMPONENT_ENABLED_STATE_DEFAULT = 0; /** * Flag for {@link #setApplicationEnabledSetting(String, int, int)} * and {@link #setComponentEnabledSetting(ComponentName, int, int)}: This * component or application has been explictily enabled, regardless of * what it has specified in its manifest. */ public static final int COMPONENT_ENABLED_STATE_ENABLED = 1; /** * Flag for {@link #setApplicationEnabledSetting(String, int, int)} * and {@link #setComponentEnabledSetting(ComponentName, int, int)}: This * component or application has been explicitly disabled, regardless of * what it has specified in its manifest. */ public static final int COMPONENT_ENABLED_STATE_DISABLED = 2; /** * Flag for {@link #setApplicationEnabledSetting(String, int, int)} only: The * user has explicitly disabled the application, regardless of what it has * specified in its manifest. Because this is due to the user's request, * they may re-enable it if desired through the appropriate system UI. This * option currently cannot be used with * {@link #setComponentEnabledSetting(ComponentName, int, int)}. */ public static final int COMPONENT_ENABLED_STATE_DISABLED_USER = 3; /** * Flag for {@link #setApplicationEnabledSetting(String, int, int)} only: This * application should be considered, until the point where the user actually * wants to use it. This means that it will not normally show up to the user * (such as in the launcher), but various parts of the user interface can * use {@link #GET_DISABLED_UNTIL_USED_COMPONENTS} to still see it and allow * the user to select it (as for example an IME, device admin, etc). Such code, * once the user has selected the app, should at that point also make it enabled. * This option currently can not be used with * {@link #setComponentEnabledSetting(ComponentName, int, int)}. */ public static final int COMPONENT_ENABLED_STATE_DISABLED_UNTIL_USED = 4; /** * Flag parameter for {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} to * indicate that this package should be installed as forward locked, i.e. only the app itself * should have access to its code and non-resource assets. * @hide */ public static final int INSTALL_FORWARD_LOCK = 0x00000001; /** * Flag parameter for {@link #installPackage} to indicate that you want to replace an already * installed package, if one exists. * @hide */ public static final int INSTALL_REPLACE_EXISTING = 0x00000002; /** * Flag parameter for {@link #installPackage} to indicate that you want to * allow test packages (those that have set android:testOnly in their * manifest) to be installed. * @hide */ public static final int INSTALL_ALLOW_TEST = 0x00000004; /** * Flag parameter for {@link #installPackage} to indicate that this package * must be installed to an ASEC on a {@link VolumeInfo#TYPE_PUBLIC}. * * @hide */ public static final int INSTALL_EXTERNAL = 0x00000008; /** * Flag parameter for {@link #installPackage} to indicate that this package * must be installed to internal storage. * * @hide */ public static final int INSTALL_INTERNAL = 0x00000010; /** * Flag parameter for {@link #installPackage} to indicate that this install * was initiated via ADB. * * @hide */ public static final int INSTALL_FROM_ADB = 0x00000020; /** * Flag parameter for {@link #installPackage} to indicate that this install * should immediately be visible to all users. * * @hide */ public static final int INSTALL_ALL_USERS = 0x00000040; /** * Flag parameter for {@link #installPackage} to indicate that it is okay * to install an update to an app where the newly installed app has a lower * version code than the currently installed app. * * @hide */ public static final int INSTALL_ALLOW_DOWNGRADE = 0x00000080; /** * Flag parameter for {@link #installPackage} to indicate that all runtime * permissions should be granted to the package. If {@link #INSTALL_ALL_USERS} * is set the runtime permissions will be granted to all users, otherwise * only to the owner. * * @hide */ public static final int INSTALL_GRANT_RUNTIME_PERMISSIONS = 0x00000100; /** {@hide} */ public static final int INSTALL_FORCE_VOLUME_UUID = 0x00000200; /** * Flag parameter for * {@link #setComponentEnabledSetting(android.content.ComponentName, int, int)} to indicate * that you don't want to kill the app containing the component. Be careful when you set this * since changing component states can make the containing application's behavior unpredictable. */ public static final int DONT_KILL_APP = 0x00000001; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} on success. * @hide */ @SystemApi public static final int INSTALL_SUCCEEDED = 1; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if the package is * already installed. * @hide */ @SystemApi public static final int INSTALL_FAILED_ALREADY_EXISTS = -1; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if the package archive * file is invalid. * @hide */ @SystemApi public static final int INSTALL_FAILED_INVALID_APK = -2; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if the URI passed in * is invalid. * @hide */ @SystemApi public static final int INSTALL_FAILED_INVALID_URI = -3; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if the package manager * service found that the device didn't have enough storage space to install the app. * @hide */ @SystemApi public static final int INSTALL_FAILED_INSUFFICIENT_STORAGE = -4; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if a * package is already installed with the same name. * @hide */ @SystemApi public static final int INSTALL_FAILED_DUPLICATE_PACKAGE = -5; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the requested shared user does not exist. * @hide */ @SystemApi public static final int INSTALL_FAILED_NO_SHARED_USER = -6; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * a previously installed package of the same name has a different signature * than the new package (and the old package's data was not removed). * @hide */ @SystemApi public static final int INSTALL_FAILED_UPDATE_INCOMPATIBLE = -7; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package is requested a shared user which is already installed on the * device and does not have matching signature. * @hide */ @SystemApi public static final int INSTALL_FAILED_SHARED_USER_INCOMPATIBLE = -8; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package uses a shared library that is not available. * @hide */ @SystemApi public static final int INSTALL_FAILED_MISSING_SHARED_LIBRARY = -9; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package uses a shared library that is not available. * @hide */ @SystemApi public static final int INSTALL_FAILED_REPLACE_COULDNT_DELETE = -10; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package failed while optimizing and validating its dex files, * either because there was not enough storage or the validation failed. * @hide */ @SystemApi public static final int INSTALL_FAILED_DEXOPT = -11; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package failed because the current SDK version is older than * that required by the package. * @hide */ @SystemApi public static final int INSTALL_FAILED_OLDER_SDK = -12; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package failed because it contains a content provider with the * same authority as a provider already installed in the system. * @hide */ @SystemApi public static final int INSTALL_FAILED_CONFLICTING_PROVIDER = -13; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package failed because the current SDK version is newer than * that required by the package. * @hide */ @SystemApi public static final int INSTALL_FAILED_NEWER_SDK = -14; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package failed because it has specified that it is a test-only * package and the caller has not supplied the {@link #INSTALL_ALLOW_TEST} * flag. * @hide */ @SystemApi public static final int INSTALL_FAILED_TEST_ONLY = -15; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the package being installed contains native code, but none that is * compatible with the device's CPU_ABI. * @hide */ @SystemApi public static final int INSTALL_FAILED_CPU_ABI_INCOMPATIBLE = -16; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package uses a feature that is not available. * @hide */ @SystemApi public static final int INSTALL_FAILED_MISSING_FEATURE = -17; // ------ Errors related to sdcard /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * a secure container mount point couldn't be accessed on external media. * @hide */ @SystemApi public static final int INSTALL_FAILED_CONTAINER_ERROR = -18; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package couldn't be installed in the specified install * location. * @hide */ @SystemApi public static final int INSTALL_FAILED_INVALID_INSTALL_LOCATION = -19; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package couldn't be installed in the specified install * location because the media is not available. * @hide */ @SystemApi public static final int INSTALL_FAILED_MEDIA_UNAVAILABLE = -20; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package couldn't be installed because the verification timed out. * @hide */ @SystemApi public static final int INSTALL_FAILED_VERIFICATION_TIMEOUT = -21; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package couldn't be installed because the verification did not succeed. * @hide */ @SystemApi public static final int INSTALL_FAILED_VERIFICATION_FAILURE = -22; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the package changed from what the calling program expected. * @hide */ @SystemApi public static final int INSTALL_FAILED_PACKAGE_CHANGED = -23; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package is assigned a different UID than it previously held. * @hide */ public static final int INSTALL_FAILED_UID_CHANGED = -24; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the new package has an older version code than the currently installed package. * @hide */ public static final int INSTALL_FAILED_VERSION_DOWNGRADE = -25; /** * Installation return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} if * the old package has target SDK high enough to support runtime permission and * the new package has target SDK low enough to not support runtime permissions. * @hide */ @SystemApi public static final int INSTALL_FAILED_PERMISSION_MODEL_DOWNGRADE = -26; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser was given a path that is not a file, or does not end with the expected * '.apk' extension. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_NOT_APK = -100; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser was unable to retrieve the AndroidManifest.xml file. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_BAD_MANIFEST = -101; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser encountered an unexpected exception. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_UNEXPECTED_EXCEPTION = -102; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser did not find any certificates in the .apk. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_NO_CERTIFICATES = -103; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser found inconsistent certificates on the files in the .apk. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES = -104; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser encountered a CertificateEncodingException in one of the * files in the .apk. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_CERTIFICATE_ENCODING = -105; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser encountered a bad or missing package name in the manifest. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_BAD_PACKAGE_NAME = -106; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser encountered a bad shared user id name in the manifest. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_BAD_SHARED_USER_ID = -107; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser encountered some structural problem in the manifest. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_MANIFEST_MALFORMED = -108; /** * Installation parse return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the parser did not find any actionable tags (instrumentation or application) * in the manifest. * @hide */ @SystemApi public static final int INSTALL_PARSE_FAILED_MANIFEST_EMPTY = -109; /** * Installation failed return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the system failed to install the package because of system issues. * @hide */ @SystemApi public static final int INSTALL_FAILED_INTERNAL_ERROR = -110; /** * Installation failed return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the system failed to install the package because the user is restricted from installing * apps. * @hide */ public static final int INSTALL_FAILED_USER_RESTRICTED = -111; /** * Installation failed return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the system failed to install the package because it is attempting to define a * permission that is already defined by some existing package. * *
The package name of the app which has already defined the permission is passed to * a {@link PackageInstallObserver}, if any, as the {@link #EXTRA_EXISTING_PACKAGE} * string extra; and the name of the permission being redefined is passed in the * {@link #EXTRA_EXISTING_PERMISSION} string extra. * @hide */ public static final int INSTALL_FAILED_DUPLICATE_PERMISSION = -112; /** * Installation failed return code: this is passed to the {@link IPackageInstallObserver} by * {@link #installPackage(android.net.Uri, IPackageInstallObserver, int)} * if the system failed to install the package because its packaged native code did not * match any of the ABIs supported by the system. * * @hide */ public static final int INSTALL_FAILED_NO_MATCHING_ABIS = -113; /** * Internal return code for NativeLibraryHelper methods to indicate that the package * being processed did not contain any native code. This is placed here only so that * it can belong to the same value space as the other install failure codes. * * @hide */ public static final int NO_NATIVE_LIBRARIES = -114; /** {@hide} */ public static final int INSTALL_FAILED_ABORTED = -115; /** * Flag parameter for {@link #deletePackage} to indicate that you don't want to delete the * package's data directory. * * @hide */ public static final int DELETE_KEEP_DATA = 0x00000001; /** * Flag parameter for {@link #deletePackage} to indicate that you want the * package deleted for all users. * * @hide */ public static final int DELETE_ALL_USERS = 0x00000002; /** * Flag parameter for {@link #deletePackage} to indicate that, if you are calling * uninstall on a system that has been updated, then don't do the normal process * of uninstalling the update and rolling back to the older system version (which * needs to happen for all users); instead, just mark the app as uninstalled for * the current user. * * @hide */ public static final int DELETE_SYSTEM_APP = 0x00000004; /** * Return code for when package deletion succeeds. This is passed to the * {@link IPackageDeleteObserver} by {@link #deletePackage()} if the system * succeeded in deleting the package. * * @hide */ public static final int DELETE_SUCCEEDED = 1; /** * Deletion failed return code: this is passed to the * {@link IPackageDeleteObserver} by {@link #deletePackage()} if the system * failed to delete the package for an unspecified reason. * * @hide */ public static final int DELETE_FAILED_INTERNAL_ERROR = -1; /** * Deletion failed return code: this is passed to the * {@link IPackageDeleteObserver} by {@link #deletePackage()} if the system * failed to delete the package because it is the active DevicePolicy * manager. * * @hide */ public static final int DELETE_FAILED_DEVICE_POLICY_MANAGER = -2; /** * Deletion failed return code: this is passed to the * {@link IPackageDeleteObserver} by {@link #deletePackage()} if the system * failed to delete the package since the user is restricted. * * @hide */ public static final int DELETE_FAILED_USER_RESTRICTED = -3; /** * Deletion failed return code: this is passed to the * {@link IPackageDeleteObserver} by {@link #deletePackage()} if the system * failed to delete the package because a profile * or device owner has marked the package as uninstallable. * * @hide */ public static final int DELETE_FAILED_OWNER_BLOCKED = -4; /** {@hide} */ public static final int DELETE_FAILED_ABORTED = -5; /** * Return code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} when the * package has been successfully moved by the system. * * @hide */ public static final int MOVE_SUCCEEDED = -100; /** * Error code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} * when the package hasn't been successfully moved by the system * because of insufficient memory on specified media. * @hide */ public static final int MOVE_FAILED_INSUFFICIENT_STORAGE = -1; /** * Error code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} * if the specified package doesn't exist. * @hide */ public static final int MOVE_FAILED_DOESNT_EXIST = -2; /** * Error code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} * if the specified package cannot be moved since its a system package. * @hide */ public static final int MOVE_FAILED_SYSTEM_PACKAGE = -3; /** * Error code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} * if the specified package cannot be moved since its forward locked. * @hide */ public static final int MOVE_FAILED_FORWARD_LOCKED = -4; /** * Error code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} * if the specified package cannot be moved to the specified location. * @hide */ public static final int MOVE_FAILED_INVALID_LOCATION = -5; /** * Error code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} * if the specified package cannot be moved to the specified location. * @hide */ public static final int MOVE_FAILED_INTERNAL_ERROR = -6; /** * Error code that is passed to the {@link IPackageMoveObserver} by * {@link #movePackage(android.net.Uri, IPackageMoveObserver)} if the * specified package already has an operation pending in the * {@link PackageHandler} queue. * * @hide */ public static final int MOVE_FAILED_OPERATION_PENDING = -7; /** * Flag parameter for {@link #movePackage} to indicate that * the package should be moved to internal storage if its * been installed on external media. * @hide */ @Deprecated public static final int MOVE_INTERNAL = 0x00000001; /** * Flag parameter for {@link #movePackage} to indicate that * the package should be moved to external media. * @hide */ @Deprecated public static final int MOVE_EXTERNAL_MEDIA = 0x00000002; /** {@hide} */ public static final String EXTRA_MOVE_ID = "android.content.pm.extra.MOVE_ID"; /** * Usable by the required verifier as the {@code verificationCode} argument * for {@link PackageManager#verifyPendingInstall} to indicate that it will * allow the installation to proceed without any of the optional verifiers * needing to vote. * * @hide */ public static final int VERIFICATION_ALLOW_WITHOUT_SUFFICIENT = 2; /** * Used as the {@code verificationCode} argument for * {@link PackageManager#verifyPendingInstall} to indicate that the calling * package verifier allows the installation to proceed. */ public static final int VERIFICATION_ALLOW = 1; /** * Used as the {@code verificationCode} argument for * {@link PackageManager#verifyPendingInstall} to indicate the calling * package verifier does not vote to allow the installation to proceed. */ public static final int VERIFICATION_REJECT = -1; /** * Used as the {@code verificationCode} argument for * {@link PackageManager#verifyIntentFilter} to indicate that the calling * IntentFilter Verifier confirms that the IntentFilter is verified. * * @hide */ public static final int INTENT_FILTER_VERIFICATION_SUCCESS = 1; /** * Used as the {@code verificationCode} argument for * {@link PackageManager#verifyIntentFilter} to indicate that the calling * IntentFilter Verifier confirms that the IntentFilter is NOT verified. * * @hide */ public static final int INTENT_FILTER_VERIFICATION_FAILURE = -1; /** * Internal status code to indicate that an IntentFilter verification result is not specified. * * @hide */ public static final int INTENT_FILTER_DOMAIN_VERIFICATION_STATUS_UNDEFINED = 0; /** * Used as the {@code status} argument for {@link PackageManager#updateIntentVerificationStatus} * to indicate that the User will always be prompted the Intent Disambiguation Dialog if there * are two or more Intent resolved for the IntentFilter's domain(s). * * @hide */ public static final int INTENT_FILTER_DOMAIN_VERIFICATION_STATUS_ASK = 1; /** * Used as the {@code status} argument for {@link PackageManager#updateIntentVerificationStatus} * to indicate that the User will never be prompted the Intent Disambiguation Dialog if there * are two or more resolution of the Intent. The default App for the domain(s) specified in the * IntentFilter will also ALWAYS be used. * * @hide */ public static final int INTENT_FILTER_DOMAIN_VERIFICATION_STATUS_ALWAYS = 2; /** * Used as the {@code status} argument for {@link PackageManager#updateIntentVerificationStatus} * to indicate that the User may be prompted the Intent Disambiguation Dialog if there * are two or more Intent resolved. The default App for the domain(s) specified in the * IntentFilter will also NEVER be presented to the User. * * @hide */ public static final int INTENT_FILTER_DOMAIN_VERIFICATION_STATUS_NEVER = 3; /** * Can be used as the {@code millisecondsToDelay} argument for * {@link PackageManager#extendVerificationTimeout}. This is the * maximum time {@code PackageManager} waits for the verification * agent to return (in milliseconds). */ public static final long MAXIMUM_VERIFICATION_TIMEOUT = 60*60*1000; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: The device's * audio pipeline is low-latency, more suitable for audio applications sensitive to delays or * lag in sound input or output. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_AUDIO_LOW_LATENCY = "android.hardware.audio.low_latency"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes at least one form of audio * output, such as speakers, audio jack or streaming over bluetooth */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_AUDIO_OUTPUT = "android.hardware.audio.output"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device has professional audio level of functionality, performance, and acoustics. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_AUDIO_PRO = "android.hardware.audio.pro"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device is capable of communicating with * other devices via Bluetooth. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_BLUETOOTH = "android.hardware.bluetooth"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device is capable of communicating with * other devices via Bluetooth Low Energy radio. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_BLUETOOTH_LE = "android.hardware.bluetooth_le"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has a camera facing away * from the screen. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA = "android.hardware.camera"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device's camera supports auto-focus. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_AUTOFOCUS = "android.hardware.camera.autofocus"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has at least one camera pointing in * some direction, or can support an external camera being connected to it. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_ANY = "android.hardware.camera.any"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device can support having an external camera connected to it. * The external camera may not always be connected or available to applications to use. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_EXTERNAL = "android.hardware.camera.external"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device's camera supports flash. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_FLASH = "android.hardware.camera.flash"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has a front facing camera. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_FRONT = "android.hardware.camera.front"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: At least one * of the cameras on the device supports the * {@link android.hardware.camera2.CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL full hardware} * capability level. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_LEVEL_FULL = "android.hardware.camera.level.full"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: At least one * of the cameras on the device supports the * {@link android.hardware.camera2.CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR manual sensor} * capability level. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_CAPABILITY_MANUAL_SENSOR = "android.hardware.camera.capability.manual_sensor"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: At least one * of the cameras on the device supports the * {@link android.hardware.camera2.CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING manual post-processing} * capability level. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_CAPABILITY_MANUAL_POST_PROCESSING = "android.hardware.camera.capability.manual_post_processing"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: At least one * of the cameras on the device supports the * {@link android.hardware.camera2.CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW RAW} * capability level. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CAMERA_CAPABILITY_RAW = "android.hardware.camera.capability.raw"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device is capable of communicating with * consumer IR devices. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CONSUMER_IR = "android.hardware.consumerir"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports one or more methods of * reporting current location. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_LOCATION = "android.hardware.location"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has a Global Positioning System * receiver and can report precise location. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_LOCATION_GPS = "android.hardware.location.gps"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device can report location with coarse * accuracy using a network-based geolocation system. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_LOCATION_NETWORK = "android.hardware.location.network"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device can record audio via a * microphone. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_MICROPHONE = "android.hardware.microphone"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device can communicate using Near-Field * Communications (NFC). */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_NFC = "android.hardware.nfc"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports host- * based NFC card emulation. * * TODO remove when depending apps have moved to new constant. * @hide * @deprecated */ @Deprecated @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_NFC_HCE = "android.hardware.nfc.hce"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports host- * based NFC card emulation. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_NFC_HOST_CARD_EMULATION = "android.hardware.nfc.hce"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports the OpenGL ES * * Android Extension Pack. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_OPENGLES_EXTENSION_PACK = "android.hardware.opengles.aep"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes an accelerometer. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_ACCELEROMETER = "android.hardware.sensor.accelerometer"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a barometer (air * pressure sensor.) */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_BAROMETER = "android.hardware.sensor.barometer"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a magnetometer (compass). */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_COMPASS = "android.hardware.sensor.compass"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a gyroscope. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_GYROSCOPE = "android.hardware.sensor.gyroscope"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a light sensor. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_LIGHT = "android.hardware.sensor.light"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a proximity sensor. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_PROXIMITY = "android.hardware.sensor.proximity"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a hardware step counter. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_STEP_COUNTER = "android.hardware.sensor.stepcounter"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a hardware step detector. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_STEP_DETECTOR = "android.hardware.sensor.stepdetector"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a heart rate monitor. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_HEART_RATE = "android.hardware.sensor.heartrate"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The heart rate sensor on this device is an Electrocargiogram. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_HEART_RATE_ECG = "android.hardware.sensor.heartrate.ecg"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes a relative humidity sensor. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_RELATIVE_HUMIDITY = "android.hardware.sensor.relative_humidity"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device includes an ambient temperature sensor. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SENSOR_AMBIENT_TEMPERATURE = "android.hardware.sensor.ambient_temperature"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports high fidelity sensor processing * capabilities. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_HIFI_SENSORS = "android.hardware.sensor.hifi_sensors"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has a telephony radio with data * communication support. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TELEPHONY = "android.hardware.telephony"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has a CDMA telephony stack. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TELEPHONY_CDMA = "android.hardware.telephony.cdma"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has a GSM telephony stack. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TELEPHONY_GSM = "android.hardware.telephony.gsm"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports connecting to USB devices * as the USB host. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_USB_HOST = "android.hardware.usb.host"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports connecting to USB accessories. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_USB_ACCESSORY = "android.hardware.usb.accessory"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The SIP API is enabled on the device. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SIP = "android.software.sip"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports SIP-based VOIP. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SIP_VOIP = "android.software.sip.voip"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The Connection Service API is enabled on the device. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_CONNECTION_SERVICE = "android.software.connectionservice"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device's display has a touch screen. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TOUCHSCREEN = "android.hardware.touchscreen"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device's touch screen supports * multitouch sufficient for basic two-finger gesture detection. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TOUCHSCREEN_MULTITOUCH = "android.hardware.touchscreen.multitouch"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device's touch screen is capable of * tracking two or more fingers fully independently. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TOUCHSCREEN_MULTITOUCH_DISTINCT = "android.hardware.touchscreen.multitouch.distinct"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device's touch screen is capable of * tracking a full hand of fingers fully independently -- that is, 5 or * more simultaneous independent pointers. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TOUCHSCREEN_MULTITOUCH_JAZZHAND = "android.hardware.touchscreen.multitouch.jazzhand"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device does not have a touch screen, but * does support touch emulation for basic events. For instance, the * device might use a mouse or remote control to drive a cursor, and * emulate basic touch pointer events like down, up, drag, etc. All * devices that support android.hardware.touchscreen or a sub-feature are * presumed to also support faketouch. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_FAKETOUCH = "android.hardware.faketouch"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device does not have a touch screen, but * does support touch emulation for basic events that supports distinct * tracking of two or more fingers. This is an extension of * {@link #FEATURE_FAKETOUCH} for input devices with this capability. Note * that unlike a distinct multitouch screen as defined by * {@link #FEATURE_TOUCHSCREEN_MULTITOUCH_DISTINCT}, these kinds of input * devices will not actually provide full two-finger gestures since the * input is being transformed to cursor movement on the screen. That is, * single finger gestures will move a cursor; two-finger swipes will * result in single-finger touch events; other two-finger gestures will * result in the corresponding two-finger touch event. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_FAKETOUCH_MULTITOUCH_DISTINCT = "android.hardware.faketouch.multitouch.distinct"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device does not have a touch screen, but * does support touch emulation for basic events that supports tracking * a hand of fingers (5 or more fingers) fully independently. * This is an extension of * {@link #FEATURE_FAKETOUCH} for input devices with this capability. Note * that unlike a multitouch screen as defined by * {@link #FEATURE_TOUCHSCREEN_MULTITOUCH_JAZZHAND}, not all two finger * gestures can be detected due to the limitations described for * {@link #FEATURE_FAKETOUCH_MULTITOUCH_DISTINCT}. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_FAKETOUCH_MULTITOUCH_JAZZHAND = "android.hardware.faketouch.multitouch.jazzhand"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device has biometric hardware to detect a fingerprint. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_FINGERPRINT = "android.hardware.fingerprint"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports portrait orientation * screens. For backwards compatibility, you can assume that if neither * this nor {@link #FEATURE_SCREEN_LANDSCAPE} is set then the device supports * both portrait and landscape. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SCREEN_PORTRAIT = "android.hardware.screen.portrait"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports landscape orientation * screens. For backwards compatibility, you can assume that if neither * this nor {@link #FEATURE_SCREEN_PORTRAIT} is set then the device supports * both portrait and landscape. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SCREEN_LANDSCAPE = "android.hardware.screen.landscape"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports live wallpapers. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_LIVE_WALLPAPER = "android.software.live_wallpaper"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports app widgets. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_APP_WIDGETS = "android.software.app_widgets"; /** * @hide * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports * {@link android.service.voice.VoiceInteractionService} and * {@link android.app.VoiceInteractor}. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_VOICE_RECOGNIZERS = "android.software.voice_recognizers"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports a home screen that is replaceable * by third party applications. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_HOME_SCREEN = "android.software.home_screen"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports adding new input methods implemented * with the {@link android.inputmethodservice.InputMethodService} API. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_INPUT_METHODS = "android.software.input_methods"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports device policy enforcement via device admins. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_DEVICE_ADMIN = "android.software.device_admin"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports leanback UI. This is * typically used in a living room television experience, but is a software * feature unlike {@link #FEATURE_TELEVISION}. Devices running with this * feature will use resources associated with the "television" UI mode. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_LEANBACK = "android.software.leanback"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports only leanback UI. Only * applications designed for this experience should be run, though this is * not enforced by the system. * @hide */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_LEANBACK_ONLY = "android.software.leanback_only"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports live TV and can display * contents from TV inputs implemented with the * {@link android.media.tv.TvInputService} API. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_LIVE_TV = "android.software.live_tv"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports WiFi (802.11) networking. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_WIFI = "android.hardware.wifi"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: The device supports Wi-Fi Direct networking. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_WIFI_DIRECT = "android.hardware.wifi.direct"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: This is a device dedicated to showing UI * on a vehicle headunit. A headunit here is defined to be inside a * vehicle that may or may not be moving. A headunit uses either a * primary display in the center console and/or additional displays in * the instrument cluster or elsewhere in the vehicle. Headunit display(s) * have limited size and resolution. The user will likely be focused on * driving so limiting driver distraction is a primary concern. User input * can be a variety of hard buttons, touch, rotary controllers and even mouse- * like interfaces. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_AUTOMOTIVE = "android.hardware.type.automotive"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: This is a device dedicated to showing UI * on a television. Television here is defined to be a typical living * room television experience: displayed on a big screen, where the user * is sitting far away from it, and the dominant form of input will be * something like a DPAD, not through touch or mouse. * @deprecated use {@link #FEATURE_LEANBACK} instead. */ @Deprecated @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_TELEVISION = "android.hardware.type.television"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: This is a device dedicated to showing UI * on a watch. A watch here is defined to be a device worn on the body, perhaps on * the wrist. The user is very close when interacting with the device. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_WATCH = "android.hardware.type.watch"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device supports printing. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_PRINTING = "android.software.print"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device can perform backup and restore operations on installed applications. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_BACKUP = "android.software.backup"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device supports creating secondary users and managed profiles via * {@link DevicePolicyManager}. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_MANAGED_USERS = "android.software.managed_users"; /** * @hide * TODO: Remove after dependencies updated b/17392243 */ public static final String FEATURE_MANAGED_PROFILES = "android.software.managed_users"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device supports verified boot. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_VERIFIED_BOOT = "android.software.verified_boot"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device supports secure removal of users. When a user is deleted the data associated * with that user is securely deleted and no longer available. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_SECURELY_REMOVES_USERS = "android.software.securely_removes_users"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device has a full implementation of the android.webkit.* APIs. Devices * lacking this feature will not have a functioning WebView implementation. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_WEBVIEW = "android.software.webview"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: This device supports ethernet. * @hide */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_ETHERNET = "android.hardware.ethernet"; /** * Feature for {@link #getSystemAvailableFeatures} and * {@link #hasSystemFeature}: This device supports HDMI-CEC. * @hide */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_HDMI_CEC = "android.hardware.hdmi.cec"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device has all of the inputs necessary to be considered a compatible game controller, or * includes a compatible game controller in the box. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_GAMEPAD = "android.hardware.gamepad"; /** * Feature for {@link #getSystemAvailableFeatures} and {@link #hasSystemFeature}: * The device has a full implementation of the android.media.midi.* APIs. */ @SdkConstant(SdkConstantType.FEATURE) public static final String FEATURE_MIDI = "android.software.midi"; /** * Action to external storage service to clean out removed apps. * @hide */ public static final String ACTION_CLEAN_EXTERNAL_STORAGE = "android.content.pm.CLEAN_EXTERNAL_STORAGE"; /** * Extra field name for the URI to a verification file. Passed to a package * verifier. * * @hide */ public static final String EXTRA_VERIFICATION_URI = "android.content.pm.extra.VERIFICATION_URI"; /** * Extra field name for the ID of a package pending verification. Passed to * a package verifier and is used to call back to * {@link PackageManager#verifyPendingInstall(int, int)} */ public static final String EXTRA_VERIFICATION_ID = "android.content.pm.extra.VERIFICATION_ID"; /** * Extra field name for the package identifier which is trying to install * the package. * * @hide */ public static final String EXTRA_VERIFICATION_INSTALLER_PACKAGE = "android.content.pm.extra.VERIFICATION_INSTALLER_PACKAGE"; /** * Extra field name for the requested install flags for a package pending * verification. Passed to a package verifier. * * @hide */ public static final String EXTRA_VERIFICATION_INSTALL_FLAGS = "android.content.pm.extra.VERIFICATION_INSTALL_FLAGS"; /** * Extra field name for the uid of who is requesting to install * the package. * * @hide */ public static final String EXTRA_VERIFICATION_INSTALLER_UID = "android.content.pm.extra.VERIFICATION_INSTALLER_UID"; /** * Extra field name for the package name of a package pending verification. * * @hide */ public static final String EXTRA_VERIFICATION_PACKAGE_NAME = "android.content.pm.extra.VERIFICATION_PACKAGE_NAME"; /** * Extra field name for the result of a verification, either * {@link #VERIFICATION_ALLOW}, or {@link #VERIFICATION_REJECT}. * Passed to package verifiers after a package is verified. */ public static final String EXTRA_VERIFICATION_RESULT = "android.content.pm.extra.VERIFICATION_RESULT"; /** * Extra field name for the version code of a package pending verification. * * @hide */ public static final String EXTRA_VERIFICATION_VERSION_CODE = "android.content.pm.extra.VERIFICATION_VERSION_CODE"; /** * Extra field name for the ID of a intent filter pending verification. Passed to * an intent filter verifier and is used to call back to * {@link PackageManager#verifyIntentFilter(int, int)} * * @hide */ public static final String EXTRA_INTENT_FILTER_VERIFICATION_ID = "android.content.pm.extra.INTENT_FILTER_VERIFICATION_ID"; /** * Extra field name for the scheme used for an intent filter pending verification. Passed to * an intent filter verifier and is used to construct the URI to verify against. * * Usually this is "https" * * @hide */ public static final String EXTRA_INTENT_FILTER_VERIFICATION_URI_SCHEME = "android.content.pm.extra.INTENT_FILTER_VERIFICATION_URI_SCHEME"; /** * Extra field name for the host names to be used for an intent filter pending verification. * Passed to an intent filter verifier and is used to construct the URI to verify the * intent filter. * * This is a space delimited list of hosts. * * @hide */ public static final String EXTRA_INTENT_FILTER_VERIFICATION_HOSTS = "android.content.pm.extra.INTENT_FILTER_VERIFICATION_HOSTS"; /** * Extra field name for the package name to be used for an intent filter pending verification. * Passed to an intent filter verifier and is used to check the verification responses coming * from the hosts. Each host response will need to include the package name of APK containing * the intent filter. * * @hide */ public static final String EXTRA_INTENT_FILTER_VERIFICATION_PACKAGE_NAME = "android.content.pm.extra.INTENT_FILTER_VERIFICATION_PACKAGE_NAME"; /** * The action used to request that the user approve a permission request * from the application. * * @hide */ @SystemApi public static final String ACTION_REQUEST_PERMISSIONS = "android.content.pm.action.REQUEST_PERMISSIONS"; /** * The names of the requested permissions. *
* Type: String[] *
* * @hide */ @SystemApi public static final String EXTRA_REQUEST_PERMISSIONS_NAMES = "android.content.pm.extra.REQUEST_PERMISSIONS_NAMES"; /** * The results from the permissions request. ** Type: int[] of #PermissionResult *
* * @hide */ @SystemApi public static final String EXTRA_REQUEST_PERMISSIONS_RESULTS = "android.content.pm.extra.REQUEST_PERMISSIONS_RESULTS"; /** * String extra for {@link PackageInstallObserver} in the 'extras' Bundle in case of * {@link #INSTALL_FAILED_DUPLICATE_PERMISSION}. This extra names the package which provides * the existing definition for the permission. * @hide */ public static final String EXTRA_FAILURE_EXISTING_PACKAGE = "android.content.pm.extra.FAILURE_EXISTING_PACKAGE"; /** * String extra for {@link PackageInstallObserver} in the 'extras' Bundle in case of * {@link #INSTALL_FAILED_DUPLICATE_PERMISSION}. This extra names the permission that is * being redundantly defined by the package being installed. * @hide */ public static final String EXTRA_FAILURE_EXISTING_PERMISSION = "android.content.pm.extra.FAILURE_EXISTING_PERMISSION"; /** * Permission flag: The permission is set in its current state * by the user and apps can still request it at runtime. * * @hide */ public static final int FLAG_PERMISSION_USER_SET = 1 << 0; /** * Permission flag: The permission is set in its current state * by the user and it is fixed, i.e. apps can no longer request * this permission. * * @hide */ public static final int FLAG_PERMISSION_USER_FIXED = 1 << 1; /** * Permission flag: The permission is set in its current state * by device policy and neither apps nor the user can change * its state. * * @hide */ public static final int FLAG_PERMISSION_POLICY_FIXED = 1 << 2; /** * Permission flag: The permission is set in a granted state but * access to resources it guards is restricted by other means to * enable revoking a permission on legacy apps that do not support * runtime permissions. If this permission is upgraded to runtime * because the app was updated to support runtime permissions, the * the permission will be revoked in the upgrade process. * * @hide */ public static final int FLAG_PERMISSION_REVOKE_ON_UPGRADE = 1 << 3; /** * Permission flag: The permission is set in its current state * because the app is a component that is a part of the system. * * @hide */ public static final int FLAG_PERMISSION_SYSTEM_FIXED = 1 << 4; /** * Permission flag: The permission is granted by default because it * enables app functionality that is expected to work out-of-the-box * for providing a smooth user experience. For example, the phone app * is expected to have the phone permission. * * @hide */ public static final int FLAG_PERMISSION_GRANTED_BY_DEFAULT = 1 << 5; /** * Mask for all permission flags. * * @hide */ @SystemApi public static final int MASK_PERMISSION_FLAGS = 0xFF; /** * Retrieve overall information about an application package that is * installed on the system. *
* Throws {@link NameNotFoundException} if a package with the given name can
* not be found on the system.
*
* @param packageName The full name (i.e. com.google.apps.contacts) of the
* desired package.
* @param flags Additional option flags. Use any combination of
* {@link #GET_ACTIVITIES}, {@link #GET_GIDS},
* {@link #GET_CONFIGURATIONS}, {@link #GET_INSTRUMENTATION},
* {@link #GET_PERMISSIONS}, {@link #GET_PROVIDERS},
* {@link #GET_RECEIVERS}, {@link #GET_SERVICES},
* {@link #GET_SIGNATURES}, {@link #GET_UNINSTALLED_PACKAGES} to
* modify the data returned.
* @return Returns a PackageInfo object containing information about the
* package. If flag GET_UNINSTALLED_PACKAGES is set and if the
* package is not found in the list of installed applications, the
* package information is retrieved from the list of uninstalled
* applications (which includes installed applications as well as
* applications with data directory i.e. applications which had been
* deleted with {@code DONT_DELETE_DATA} flag set).
* @see #GET_ACTIVITIES
* @see #GET_GIDS
* @see #GET_CONFIGURATIONS
* @see #GET_INSTRUMENTATION
* @see #GET_PERMISSIONS
* @see #GET_PROVIDERS
* @see #GET_RECEIVERS
* @see #GET_SERVICES
* @see #GET_SIGNATURES
* @see #GET_UNINSTALLED_PACKAGES
*/
public abstract PackageInfo getPackageInfo(String packageName, int flags)
throws NameNotFoundException;
/**
* Map from the current package names in use on the device to whatever
* the current canonical name of that package is.
* @param names Array of current names to be mapped.
* @return Returns an array of the same size as the original, containing
* the canonical name for each package.
*/
public abstract String[] currentToCanonicalPackageNames(String[] names);
/**
* Map from a packages canonical name to the current name in use on the device.
* @param names Array of new names to be mapped.
* @return Returns an array of the same size as the original, containing
* the current name for each package.
*/
public abstract String[] canonicalToCurrentPackageNames(String[] names);
/**
* Returns a "good" intent to launch a front-door activity in a package.
* This is used, for example, to implement an "open" button when browsing
* through packages. The current implementation looks first for a main
* activity in the category {@link Intent#CATEGORY_INFO}, and next for a
* main activity in the category {@link Intent#CATEGORY_LAUNCHER}. Returns
* null if neither are found.
*
* @param packageName The name of the package to inspect.
*
* @return A fully-qualified {@link Intent} that can be used to launch the
* main activity in the package. Returns null if the package
* does not contain such an activity, or if packageName is not
* recognized.
*/
public abstract Intent getLaunchIntentForPackage(String packageName);
/**
* Return a "good" intent to launch a front-door Leanback activity in a
* package, for use for example to implement an "open" button when browsing
* through packages. The current implementation will look for a main
* activity in the category {@link Intent#CATEGORY_LEANBACK_LAUNCHER}, or
* return null if no main leanback activities are found.
*
* Throws {@link NameNotFoundException} if a package with the given name * cannot be found on the system. * * @param packageName The name of the package to inspect. * @return Returns either a fully-qualified Intent that can be used to launch * the main Leanback activity in the package, or null if the package * does not contain such an activity. */ public abstract Intent getLeanbackLaunchIntentForPackage(String packageName); /** * Return an array of all of the secondary group-ids that have been assigned * to a package. *
* Throws {@link NameNotFoundException} if a package with the given name * cannot be found on the system. * * @param packageName The full name (i.e. com.google.apps.contacts) of the * desired package. * @return Returns an int array of the assigned gids, or null if there are * none. */ public abstract int[] getPackageGids(String packageName) throws NameNotFoundException; /** * @hide Return the uid associated with the given package name for the * given user. * *
Throws {@link NameNotFoundException} if a package with the given * name can not be found on the system. * * @param packageName The full name (i.e. com.google.apps.contacts) of the * desired package. * @param userHandle The user handle identifier to look up the package under. * * @return Returns an integer uid who owns the given package name. */ public abstract int getPackageUid(String packageName, int userHandle) throws NameNotFoundException; /** * Retrieve all of the information we know about a particular permission. * *
Throws {@link NameNotFoundException} if a permission with the given * name cannot be found on the system. * * @param name The fully qualified name (i.e. com.google.permission.LOGIN) * of the permission you are interested in. * @param flags Additional option flags. Use {@link #GET_META_DATA} to * retrieve any meta-data associated with the permission. * * @return Returns a {@link PermissionInfo} containing information about the * permission. */ public abstract PermissionInfo getPermissionInfo(String name, int flags) throws NameNotFoundException; /** * Query for all of the permissions associated with a particular group. * *
Throws {@link NameNotFoundException} if the given group does not
* exist.
*
* @param group The fully qualified name (i.e. com.google.permission.LOGIN)
* of the permission group you are interested in. Use null to
* find all of the permissions not associated with a group.
* @param flags Additional option flags. Use {@link #GET_META_DATA} to
* retrieve any meta-data associated with the permissions.
*
* @return Returns a list of {@link PermissionInfo} containing information
* about all of the permissions in the given group.
*/
public abstract List Throws {@link NameNotFoundException} if a permission group with the given
* name cannot be found on the system.
*
* @param name The fully qualified name (i.e. com.google.permission_group.APPS)
* of the permission you are interested in.
* @param flags Additional option flags. Use {@link #GET_META_DATA} to
* retrieve any meta-data associated with the permission group.
*
* @return Returns a {@link PermissionGroupInfo} containing information
* about the permission.
*/
public abstract PermissionGroupInfo getPermissionGroupInfo(String name,
int flags) throws NameNotFoundException;
/**
* Retrieve all of the known permission groups in the system.
*
* @param flags Additional option flags. Use {@link #GET_META_DATA} to
* retrieve any meta-data associated with the permission group.
*
* @return Returns a list of {@link PermissionGroupInfo} containing
* information about all of the known permission groups.
*/
public abstract List Throws {@link NameNotFoundException} if an application with the given
* package name cannot be found on the system.
*
* @param packageName The full name (i.e. com.google.apps.contacts) of an
* application.
* @param flags Additional option flags. Use any combination of
* {@link #GET_META_DATA}, {@link #GET_SHARED_LIBRARY_FILES},
* {@link #GET_UNINSTALLED_PACKAGES} to modify the data returned.
*
* @return {@link ApplicationInfo} Returns ApplicationInfo object containing
* information about the package.
* If flag GET_UNINSTALLED_PACKAGES is set and if the package is not
* found in the list of installed applications,
* the application information is retrieved from the
* list of uninstalled applications(which includes
* installed applications as well as applications
* with data directory ie applications which had been
* deleted with {@code DONT_DELETE_DATA} flag set).
*
* @see #GET_META_DATA
* @see #GET_SHARED_LIBRARY_FILES
* @see #GET_UNINSTALLED_PACKAGES
*/
public abstract ApplicationInfo getApplicationInfo(String packageName,
int flags) throws NameNotFoundException;
/**
* Retrieve all of the information we know about a particular activity
* class.
*
* Throws {@link NameNotFoundException} if an activity with the given
* class name cannot be found on the system.
*
* @param component The full component name (i.e.
* com.google.apps.contacts/com.google.apps.contacts.ContactsList) of an Activity
* class.
* @param flags Additional option flags. Use any combination of
* {@link #GET_META_DATA}, {@link #GET_SHARED_LIBRARY_FILES},
* to modify the data (in ApplicationInfo) returned.
*
* @return {@link ActivityInfo} containing information about the activity.
*
* @see #GET_INTENT_FILTERS
* @see #GET_META_DATA
* @see #GET_SHARED_LIBRARY_FILES
*/
public abstract ActivityInfo getActivityInfo(ComponentName component,
int flags) throws NameNotFoundException;
/**
* Retrieve all of the information we know about a particular receiver
* class.
*
* Throws {@link NameNotFoundException} if a receiver with the given
* class name cannot be found on the system.
*
* @param component The full component name (i.e.
* com.google.apps.calendar/com.google.apps.calendar.CalendarAlarm) of a Receiver
* class.
* @param flags Additional option flags. Use any combination of
* {@link #GET_META_DATA}, {@link #GET_SHARED_LIBRARY_FILES},
* to modify the data returned.
*
* @return {@link ActivityInfo} containing information about the receiver.
*
* @see #GET_INTENT_FILTERS
* @see #GET_META_DATA
* @see #GET_SHARED_LIBRARY_FILES
*/
public abstract ActivityInfo getReceiverInfo(ComponentName component,
int flags) throws NameNotFoundException;
/**
* Retrieve all of the information we know about a particular service
* class.
*
* Throws {@link NameNotFoundException} if a service with the given
* class name cannot be found on the system.
*
* @param component The full component name (i.e.
* com.google.apps.media/com.google.apps.media.BackgroundPlayback) of a Service
* class.
* @param flags Additional option flags. Use any combination of
* {@link #GET_META_DATA}, {@link #GET_SHARED_LIBRARY_FILES},
* to modify the data returned.
*
* @return ServiceInfo containing information about the service.
*
* @see #GET_META_DATA
* @see #GET_SHARED_LIBRARY_FILES
*/
public abstract ServiceInfo getServiceInfo(ComponentName component,
int flags) throws NameNotFoundException;
/**
* Retrieve all of the information we know about a particular content
* provider class.
*
* Throws {@link NameNotFoundException} if a provider with the given
* class name cannot be found on the system.
*
* @param component The full component name (i.e.
* com.google.providers.media/com.google.providers.media.MediaProvider) of a
* ContentProvider class.
* @param flags Additional option flags. Use any combination of
* {@link #GET_META_DATA}, {@link #GET_SHARED_LIBRARY_FILES},
* to modify the data returned.
*
* @return ProviderInfo containing information about the service.
*
* @see #GET_META_DATA
* @see #GET_SHARED_LIBRARY_FILES
*/
public abstract ProviderInfo getProviderInfo(ComponentName component,
int flags) throws NameNotFoundException;
/**
* Return a List of all packages that are installed
* on the device.
*
* @param flags Additional option flags. Use any combination of
* {@link #GET_ACTIVITIES},
* {@link #GET_GIDS},
* {@link #GET_CONFIGURATIONS},
* {@link #GET_INSTRUMENTATION},
* {@link #GET_PERMISSIONS},
* {@link #GET_PROVIDERS},
* {@link #GET_RECEIVERS},
* {@link #GET_SERVICES},
* {@link #GET_SIGNATURES},
* {@link #GET_UNINSTALLED_PACKAGES} to modify the data returned.
*
* @return A List of PackageInfo objects, one for each package that is
* installed on the device. In the unlikely case of there being no
* installed packages, an empty list is returned.
* If flag GET_UNINSTALLED_PACKAGES is set, a list of all
* applications including those deleted with {@code DONT_DELETE_DATA}
* (partially installed apps with data directory) will be returned.
*
* @see #GET_ACTIVITIES
* @see #GET_GIDS
* @see #GET_CONFIGURATIONS
* @see #GET_INSTRUMENTATION
* @see #GET_PERMISSIONS
* @see #GET_PROVIDERS
* @see #GET_RECEIVERS
* @see #GET_SERVICES
* @see #GET_SIGNATURES
* @see #GET_UNINSTALLED_PACKAGES
*/
public abstract List It is good to make your permission tree name descriptive, because you
* are taking possession of that entire set of permission names. Thus, it
* must be under a domain you control, with a suffix that will not match
* any normal permissions that may be declared in any applications that
* are part of that domain.
*
* New permissions must be added before
* any .apks are installed that use those permissions. Permissions you
* add through this method are remembered across reboots of the device.
* If the given permission already exists, the info you supply here
* will be used to update it.
*
* @param info Description of the permission to be added.
*
* @return Returns true if a new permission was created, false if an
* existing one was updated.
*
* @throws SecurityException if you are not allowed to add the
* given permission name.
*
* @see #removePermission(String)
*/
public abstract boolean addPermission(PermissionInfo info);
/**
* Like {@link #addPermission(PermissionInfo)} but asynchronously
* persists the package manager state after returning from the call,
* allowing it to return quicker and batch a series of adds at the
* expense of no guarantee the added permission will be retained if
* the device is rebooted before it is written.
*/
public abstract boolean addPermissionAsync(PermissionInfo info);
/**
* Removes a permission that was previously added with
* {@link #addPermission(PermissionInfo)}. The same ownership rules apply
* -- you are only allowed to remove permissions that you are allowed
* to add.
*
* @param name The name of the permission to remove.
*
* @throws SecurityException if you are not allowed to remove the
* given permission name.
*
* @see #addPermission(PermissionInfo)
*/
public abstract void removePermission(String name);
/**
* Permission flags set when granting or revoking a permission.
*
* @hide
*/
@SystemApi
@IntDef({FLAG_PERMISSION_USER_SET,
FLAG_PERMISSION_USER_FIXED,
FLAG_PERMISSION_POLICY_FIXED,
FLAG_PERMISSION_REVOKE_ON_UPGRADE,
FLAG_PERMISSION_SYSTEM_FIXED,
FLAG_PERMISSION_GRANTED_BY_DEFAULT})
@Retention(RetentionPolicy.SOURCE)
public @interface PermissionFlags {}
/**
* Grant a runtime permission to an application which the application does not
* already have. The permission must have been requested by the application.
* If the application is not allowed to hold the permission, a {@link
* java.lang.SecurityException} is thrown.
*
* Note: Using this API requires holding
* android.permission.GRANT_REVOKE_PERMISSIONS and if the user id is
* not the current user android.permission.INTERACT_ACROSS_USERS_FULL.
*
* Note: Using this API requires holding
* android.permission.GRANT_REVOKE_PERMISSIONS and if the user id is
* not the current user android.permission.INTERACT_ACROSS_USERS_FULL.
* Note: if using an implicit Intent (without an explicit ComponentName
* specified), be sure to consider whether to set the {@link #MATCH_DEFAULT_ONLY}
* only flag. You need to do so to resolve the activity in the same way
* that {@link android.content.Context#startActivity(Intent)} and
* {@link android.content.Intent#resolveActivity(PackageManager)
* Intent.resolveActivity(PackageManager)} do. Note: if using an implicit Intent (without an explicit ComponentName
* specified), be sure to consider whether to set the {@link #MATCH_DEFAULT_ONLY}
* only flag. You need to do so to resolve the activity in the same way
* that {@link android.content.Context#startActivity(Intent)} and
* {@link android.content.Intent#resolveActivity(PackageManager)
* Intent.resolveActivity(PackageManager)} do. Note: unlike most other methods, an empty result set is indicated
* by a null return instead of an empty list.
*
* @param processName If non-null, limits the returned providers to only
* those that are hosted by the given process. If null,
* all content providers are returned.
* @param uid If processName is non-null, this is the required
* uid owning the requested content providers.
* @param flags Additional option flags. Currently should always be 0.
*
* @return A List<ContentProviderInfo> containing one entry for each
* content provider either patching processName or, if
* processName is null, all known content providers.
* If there are no matching providers, null is returned.
*/
public abstract List Throws {@link NameNotFoundException} if instrumentation with the
* given class name cannot be found on the system.
*
* @param className The full name (i.e.
* com.google.apps.contacts.InstrumentList) of an
* Instrumentation class.
* @param flags Additional option flags. Currently should always be 0.
*
* @return InstrumentationInfo containing information about the
* instrumentation.
*/
public abstract InstrumentationInfo getInstrumentationInfo(
ComponentName className, int flags) throws NameNotFoundException;
/**
* Retrieve information about available instrumentation code. May be used
* to retrieve either all instrumentation code, or only the code targeting
* a particular package.
*
* @param targetPackage If null, all instrumentation is returned; only the
* instrumentation targeting this package name is
* returned.
* @param flags Additional option flags. Currently should always be 0.
*
* @return A List<InstrumentationInfo> containing one entry for each
* matching available Instrumentation. Returns an empty list if
* there is no instrumentation available for the given package.
*/
public abstract List
* If the original drawable is a BitmapDrawable and the backing bitmap is
* mutable as per {@link android.graphics.Bitmap#isMutable()}, the badging
* is performed in place and the original drawable is returned.
*
* If the original drawable is a BitmapDrawable and the backing bitmap is
* mutable as per {@link android.graphics.Bitmap#isMutable()}, the bading
* is performed in place and the original drawable is returned.
*
*
*
* @param targetPackage The installed package whose installer will be changed.
* @param installerPackageName The package name of the new installer. May be
* null to clear the association.
*/
public abstract void setInstallerPackageName(String targetPackage,
String installerPackageName);
/**
* Attempts to delete a package. Since this may take a little while, the result will
* be posted back to the given observer. A deletion will fail if the calling context
* lacks the {@link android.Manifest.permission#DELETE_PACKAGES} permission, if the
* named package cannot be found, or if the named package is a "system package".
* (TODO: include pointer to documentation on "system packages")
*
* @param packageName The name of the package to delete
* @param observer An observer callback to get notified when the package deletion is
* complete. {@link android.content.pm.IPackageDeleteObserver#packageDeleted(boolean)} will be
* called when that happens. observer may be null to indicate that no callback is desired.
* @param flags - possible values: {@link #DELETE_KEEP_DATA},
* {@link #DELETE_ALL_USERS}.
*
* @hide
*/
// @SystemApi
public abstract void deletePackage(
String packageName, IPackageDeleteObserver observer, int flags);
/**
* Retrieve the package name of the application that installed a package. This identifies
* which market the package came from.
*
* @param packageName The name of the package to query
*/
public abstract String getInstallerPackageName(String packageName);
/**
* Attempts to clear the user data directory of an application.
* Since this may take a little while, the result will
* be posted back to the given observer. A deletion will fail if the
* named package cannot be found, or if the named package is a "system package".
*
* @param packageName The name of the package
* @param observer An observer callback to get notified when the operation is finished
* {@link android.content.pm.IPackageDataObserver#onRemoveCompleted(String, boolean)}
* will be called when that happens. observer may be null to indicate that
* no callback is desired.
*
* @hide
*/
public abstract void clearApplicationUserData(String packageName,
IPackageDataObserver observer);
/**
* Attempts to delete the cache files associated with an application.
* Since this may take a little while, the result will
* be posted back to the given observer. A deletion will fail if the calling context
* lacks the {@link android.Manifest.permission#DELETE_CACHE_FILES} permission, if the
* named package cannot be found, or if the named package is a "system package".
*
* @param packageName The name of the package to delete
* @param observer An observer callback to get notified when the cache file deletion
* is complete.
* {@link android.content.pm.IPackageDataObserver#onRemoveCompleted(String, boolean)}
* will be called when that happens. observer may be null to indicate that
* no callback is desired.
*
* @hide
*/
public abstract void deleteApplicationCacheFiles(String packageName,
IPackageDataObserver observer);
/**
* Free storage by deleting LRU sorted list of cache files across
* all applications. If the currently available free storage
* on the device is greater than or equal to the requested
* free storage, no cache files are cleared. If the currently
* available storage on the device is less than the requested
* free storage, some or all of the cache files across
* all applications are deleted (based on last accessed time)
* to increase the free storage space on the device to
* the requested value. There is no guarantee that clearing all
* the cache files from all applications will clear up
* enough storage to achieve the desired value.
* @param freeStorageSize The number of bytes of storage to be
* freed by the system. Say if freeStorageSize is XX,
* and the current free storage is YY,
* if XX is less than YY, just return. if not free XX-YY number
* of bytes if possible.
* @param observer call back used to notify when
* the operation is completed
*
* @hide
*/
// @SystemApi
public void freeStorageAndNotify(long freeStorageSize, IPackageDataObserver observer) {
freeStorageAndNotify(null, freeStorageSize, observer);
}
/** {@hide} */
public abstract void freeStorageAndNotify(String volumeUuid, long freeStorageSize,
IPackageDataObserver observer);
/**
* Free storage by deleting LRU sorted list of cache files across
* all applications. If the currently available free storage
* on the device is greater than or equal to the requested
* free storage, no cache files are cleared. If the currently
* available storage on the device is less than the requested
* free storage, some or all of the cache files across
* all applications are deleted (based on last accessed time)
* to increase the free storage space on the device to
* the requested value. There is no guarantee that clearing all
* the cache files from all applications will clear up
* enough storage to achieve the desired value.
* @param freeStorageSize The number of bytes of storage to be
* freed by the system. Say if freeStorageSize is XX,
* and the current free storage is YY,
* if XX is less than YY, just return. if not free XX-YY number
* of bytes if possible.
* @param pi IntentSender call back used to
* notify when the operation is completed.May be null
* to indicate that no call back is desired.
*
* @hide
*/
public void freeStorage(long freeStorageSize, IntentSender pi) {
freeStorage(null, freeStorageSize, pi);
}
/** {@hide} */
public abstract void freeStorage(String volumeUuid, long freeStorageSize, IntentSender pi);
/**
* Retrieve the size information for a package.
* Since this may take a little while, the result will
* be posted back to the given observer. The calling context
* should have the {@link android.Manifest.permission#GET_PACKAGE_SIZE} permission.
*
* @param packageName The name of the package whose size information is to be retrieved
* @param userHandle The user whose size information should be retrieved.
* @param observer An observer callback to get notified when the operation
* is complete.
* {@link android.content.pm.IPackageStatsObserver#onGetStatsCompleted(PackageStats, boolean)}
* The observer's callback is invoked with a PackageStats object(containing the
* code, data and cache sizes of the package) and a boolean value representing
* the status of the operation. observer may be null to indicate that
* no callback is desired.
*
* @hide
*/
public abstract void getPackageSizeInfo(String packageName, int userHandle,
IPackageStatsObserver observer);
/**
* Like {@link #getPackageSizeInfo(String, int, IPackageStatsObserver)}, but
* returns the size for the calling user.
*
* @hide
*/
public void getPackageSizeInfo(String packageName, IPackageStatsObserver observer) {
getPackageSizeInfo(packageName, UserHandle.myUserId(), observer);
}
/**
* @deprecated This function no longer does anything; it was an old
* approach to managing preferred activities, which has been superseded
* by (and conflicts with) the modern activity-based preferences.
*/
@Deprecated
public abstract void addPackageToPreferred(String packageName);
/**
* @deprecated This function no longer does anything; it was an old
* approach to managing preferred activities, which has been superseded
* by (and conflicts with) the modern activity-based preferences.
*/
@Deprecated
public abstract void removePackageFromPreferred(String packageName);
/**
* Retrieve the list of all currently configured preferred packages. The
* first package on the list is the most preferred, the last is the
* least preferred.
*
* @param flags Additional option flags. Use any combination of
* {@link #GET_ACTIVITIES},
* {@link #GET_GIDS},
* {@link #GET_CONFIGURATIONS},
* {@link #GET_INSTRUMENTATION},
* {@link #GET_PERMISSIONS},
* {@link #GET_PROVIDERS},
* {@link #GET_RECEIVERS},
* {@link #GET_SERVICES},
* {@link #GET_SIGNATURES}, to modify the data returned.
*
* @return Returns a list of PackageInfo objects describing each
* preferred application, in order of preference.
*
* @see #GET_ACTIVITIES
* @see #GET_GIDS
* @see #GET_CONFIGURATIONS
* @see #GET_INSTRUMENTATION
* @see #GET_PERMISSIONS
* @see #GET_PROVIDERS
* @see #GET_RECEIVERS
* @see #GET_SERVICES
* @see #GET_SIGNATURES
*/
public abstract List