The input character sequence is provided in a character buffer or a series * of such buffers. The output byte sequence is written to a byte buffer * or a series of such buffers. An encoder should always be used by making * the following sequence of method invocations, hereinafter referred to as an * encoding operation: * *
Reset the encoder via the {@link #reset reset} method, unless it * has not been used before;
Invoke the {@link #encode encode} method zero or more times, as * long as additional input may be available, passing false for the * endOfInput argument and filling the input buffer and flushing the * output buffer between invocations;
Invoke the {@link #encode encode} method one final time, passing * true for the endOfInput argument; and then
Invoke the {@link #flush flush} method so that the encoder can * flush any internal state to the output buffer.
This method invokes the {@link #implReplaceWith implReplaceWith} * method, passing the new replacement, after checking that the new * replacement is acceptable.
* * @param newReplacement * * The new replacement; must not be null, must have * non-zero length, must not be longer than the value returned by * the {@link #maxBytesPerChar() maxBytesPerChar} method, and * must be {@link #isLegalReplacement legal}
*
* @return This encoder
*
* @throws IllegalArgumentException
* If the preconditions on the parameter do not hold
*/
public final CharsetEncoder replaceWith(byte[] newReplacement) {
if (newReplacement == null)
throw new IllegalArgumentException("Null replacement");
int len = newReplacement.length;
if (len == 0)
throw new IllegalArgumentException("Empty replacement");
if (len > maxBytesPerChar)
throw new IllegalArgumentException("Replacement too long");
if (!isLegalReplacement(newReplacement))
throw new IllegalArgumentException("Illegal replacement");
this.replacement = newReplacement;
implReplaceWith(newReplacement);
return this;
}
/**
* Reports a change to this encoder's replacement value.
*
* The default implementation of this method does nothing. This method
* should be overridden by encoders that require notification of changes to
* the replacement.
*
* @param newReplacement
*/
protected void implReplaceWith(byte[] newReplacement) {
}
private WeakReference cachedDecoder = null;
/**
* Tells whether or not the given byte array is a legal replacement value
* for this encoder.
*
* A replacement is legal if, and only if, it is a legal sequence of
* bytes in this encoder's charset; that is, it must be possible to decode
* the replacement into one or more sixteen-bit Unicode characters.
*
*
The default implementation of this method is not very efficient; it
* should generally be overridden to improve performance.
*
* @param repl The byte array to be tested
*
* @return true if, and only if, the given byte array
* is a legal replacement value for this encoder
*/
public boolean isLegalReplacement(byte[] repl) {
WeakReference wr = cachedDecoder;
CharsetDecoder dec = null;
if ((wr == null) || ((dec = wr.get()) == null)) {
dec = charset().newDecoder();
dec.onMalformedInput(CodingErrorAction.REPORT);
dec.onUnmappableCharacter(CodingErrorAction.REPORT);
cachedDecoder = new WeakReference(dec);
} else {
dec.reset();
}
ByteBuffer bb = ByteBuffer.wrap(repl);
CharBuffer cb = CharBuffer.allocate((int)(bb.remaining()
* dec.maxCharsPerByte()));
CoderResult cr = dec.decode(bb, cb, true);
return !cr.isError();
}
/**
* Returns this encoder's current action for malformed-input errors.
*
* @return The current malformed-input action, which is never null
*/
public CodingErrorAction malformedInputAction() {
return malformedInputAction;
}
/**
* Changes this encoder's action for malformed-input errors.
*
* This method invokes the {@link #implOnMalformedInput
* implOnMalformedInput} method, passing the new action.
*
* @param newAction The new action; must not be null
*
* @return This encoder
*
* @throws IllegalArgumentException
* If the precondition on the parameter does not hold
*/
public final CharsetEncoder onMalformedInput(CodingErrorAction newAction) {
if (newAction == null)
throw new IllegalArgumentException("Null action");
malformedInputAction = newAction;
implOnMalformedInput(newAction);
return this;
}
/**
* Reports a change to this encoder's malformed-input action.
*
* The default implementation of this method does nothing. This method
* should be overridden by encoders that require notification of changes to
* the malformed-input action.
*/
protected void implOnMalformedInput(CodingErrorAction newAction) { }
/**
* Returns this encoder's current action for unmappable-character errors.
*
*
* @return The current unmappable-character action, which is never
* null
*/
public CodingErrorAction unmappableCharacterAction() {
return unmappableCharacterAction;
}
/**
* Changes this encoder's action for unmappable-character errors.
*
* This method invokes the {@link #implOnUnmappableCharacter
* implOnUnmappableCharacter} method, passing the new action.
*
* @param newAction The new action; must not be null
*
* @return This encoder
*
* @throws IllegalArgumentException
* If the precondition on the parameter does not hold
*/
public final CharsetEncoder onUnmappableCharacter(CodingErrorAction
newAction)
{
if (newAction == null)
throw new IllegalArgumentException("Null action");
unmappableCharacterAction = newAction;
implOnUnmappableCharacter(newAction);
return this;
}
/**
* Reports a change to this encoder's unmappable-character action.
*
* The default implementation of this method does nothing. This method
* should be overridden by encoders that require notification of changes to
* the unmappable-character action.
*/
protected void implOnUnmappableCharacter(CodingErrorAction newAction) { }
/**
* Returns the average number of bytes that will be produced for each
* character of input. This heuristic value may be used to estimate the size
* of the output buffer required for a given input sequence.
*
* @return The average number of bytes produced
* per character of input
*/
public final float averageBytesPerChar() {
return averageBytesPerChar;
}
/**
* Returns the maximum number of bytes that will be produced for each
* character of input. This value may be used to compute the worst-case size
* of the output buffer required for a given input sequence.
*
* @return The maximum number of bytes that will be produced per
* character of input
*/
public final float maxBytesPerChar() {
return maxBytesPerChar;
}
/**
* Encodes as many characters as possible from the given input buffer,
* writing the results to the given output buffer.
*
* The buffers are read from, and written to, starting at their current
* positions. At most {@link Buffer#remaining in.remaining()} characters
* will be read and at most {@link Buffer#remaining out.remaining()}
* bytes will be written. The buffers' positions will be advanced to
* reflect the characters read and the bytes written, but their marks and
* limits will not be modified.
*
*
In addition to reading characters from the input buffer and writing
* bytes to the output buffer, this method returns a {@link CoderResult}
* object to describe its reason for termination:
*
*
*
* {@link CoderResult#UNDERFLOW} indicates that as much of the
* input buffer as possible has been encoded. If there is no further
* input then the invoker can proceed to the next step of the
* encoding operation. Otherwise this method
* should be invoked again with further input.
{@link CoderResult#OVERFLOW} indicates that there is
* insufficient space in the output buffer to encode any more characters.
* This method should be invoked again with an output buffer that has
* more {@linkplain Buffer#remaining remaining} bytes. This is
* typically done by draining any encoded bytes from the output
* buffer.
A {@link CoderResult#malformedForLength
*
malformed-input} result indicates that a malformed-input
* error has been detected. The malformed characters begin at the input
* buffer's (possibly incremented) position; the number of malformed
* characters may be determined by invoking the result object's {@link
* CoderResult#length() length} method. This case applies only if the
* {@link #onMalformedInput malformed action} of this encoder
* is {@link CodingErrorAction#REPORT}; otherwise the malformed input
* will be ignored or replaced, as requested.
*
* An {@link CoderResult#unmappableForLength
*
unmappable-character} result indicates that an
* unmappable-character error has been detected. The characters that
* encode the unmappable character begin at the input buffer's (possibly
* incremented) position; the number of such characters may be determined
* by invoking the result object's {@link CoderResult#length() length}
* method. This case applies only if the {@link #onUnmappableCharacter
* unmappable action} of this encoder is {@link
* CodingErrorAction#REPORT}; otherwise the unmappable character will be
* ignored or replaced, as requested.
*
*
*
* In any case, if this method is to be reinvoked in the same encoding
* operation then care should be taken to preserve any characters remaining
* in the input buffer so that they are available to the next invocation.
*
* The endOfInput parameter advises this method as to whether
* the invoker can provide further input beyond that contained in the given
* input buffer. If there is a possibility of providing additional input
* then the invoker should pass false for this parameter; if there
* is no possibility of providing further input then the invoker should
* pass true. It is not erroneous, and in fact it is quite
* common, to pass false in one invocation and later discover that
* no further input was actually available. It is critical, however, that
* the final invocation of this method in a sequence of invocations always
* pass true so that any remaining unencoded input will be treated
* as being malformed.
*
*
This method works by invoking the {@link #encodeLoop encodeLoop}
* method, interpreting its results, handling error conditions, and
* reinvoking it as necessary.
*
*
* @param in
* The input character buffer
*
* @param out
* The output byte buffer
*
* @param endOfInput
* true if, and only if, the invoker can provide no
* additional input characters beyond those in the given buffer
*
* @return A coder-result object describing the reason for termination
*
* @throws IllegalStateException
* If an encoding operation is already in progress and the previous
* step was an invocation neither of the {@link #reset reset}
* method, nor of this method with a value of false for
* the endOfInput parameter, nor of this method with a
* value of true for the endOfInput parameter
* but a return value indicating an incomplete encoding operation
*
* @throws CoderMalfunctionError
* If an invocation of the encodeLoop method threw
* an unexpected exception
*/
public final CoderResult encode(CharBuffer in, ByteBuffer out,
boolean endOfInput)
{
int newState = endOfInput ? ST_END : ST_CODING;
if ((state != ST_RESET) && (state != ST_CODING)
&& !(endOfInput && (state == ST_END)))
throwIllegalStateException(state, newState);
state = newState;
for (;;) {
CoderResult cr;
try {
cr = encodeLoop(in, out);
} catch (BufferUnderflowException x) {
throw new CoderMalfunctionError(x);
} catch (BufferOverflowException x) {
throw new CoderMalfunctionError(x);
}
if (cr.isOverflow())
return cr;
if (cr.isUnderflow()) {
if (endOfInput && in.hasRemaining()) {
cr = CoderResult.malformedForLength(in.remaining());
// Fall through to malformed-input case
} else {
return cr;
}
}
CodingErrorAction action = null;
if (cr.isMalformed())
action = malformedInputAction;
else if (cr.isUnmappable())
action = unmappableCharacterAction;
else
assert false : cr.toString();
if (action == CodingErrorAction.REPORT)
return cr;
if (action == CodingErrorAction.REPLACE) {
if (out.remaining() < replacement.length)
return CoderResult.OVERFLOW;
out.put(replacement);
}
if ((action == CodingErrorAction.IGNORE)
|| (action == CodingErrorAction.REPLACE)) {
// Skip erroneous input either way
in.position(in.position() + cr.length());
continue;
}
assert false;
}
}
/**
* Flushes this encoder.
*
* Some encoders maintain internal state and may need to write some
* final bytes to the output buffer once the overall input sequence has
* been read.
*
*
Any additional output is written to the output buffer beginning at
* its current position. At most {@link Buffer#remaining out.remaining()}
* bytes will be written. The buffer's position will be advanced
* appropriately, but its mark and limit will not be modified.
*
*
If this method completes successfully then it returns {@link
* CoderResult#UNDERFLOW}. If there is insufficient room in the output
* buffer then it returns {@link CoderResult#OVERFLOW}. If this happens
* then this method must be invoked again, with an output buffer that has
* more room, in order to complete the current encoding
* operation.
*
*
If this encoder has already been flushed then invoking this method
* has no effect.
*
*
This method invokes the {@link #implFlush implFlush} method to
* perform the actual flushing operation.
*
* @param out
* The output byte buffer
*
* @return A coder-result object, either {@link CoderResult#UNDERFLOW} or
* {@link CoderResult#OVERFLOW}
*
* @throws IllegalStateException
* If the previous step of the current encoding operation was an
* invocation neither of the {@link #flush flush} method nor of
* the three-argument {@link
* #encode(CharBuffer,ByteBuffer,boolean) encode} method
* with a value of true for the endOfInput
* parameter
*/
public final CoderResult flush(ByteBuffer out) {
if (state == ST_END) {
CoderResult cr = implFlush(out);
if (cr.isUnderflow())
state = ST_FLUSHED;
return cr;
}
if (state != ST_FLUSHED)
throwIllegalStateException(state, ST_FLUSHED);
return CoderResult.UNDERFLOW; // Already flushed
}
/**
* Flushes this encoder.
*
* The default implementation of this method does nothing, and always
* returns {@link CoderResult#UNDERFLOW}. This method should be overridden
* by encoders that may need to write final bytes to the output buffer
* once the entire input sequence has been read.
*
* @param out
* The output byte buffer
*
* @return A coder-result object, either {@link CoderResult#UNDERFLOW} or
* {@link CoderResult#OVERFLOW}
*/
protected CoderResult implFlush(ByteBuffer out) {
return CoderResult.UNDERFLOW;
}
/**
* Resets this encoder, clearing any internal state.
*
* This method resets charset-independent state and also invokes the
* {@link #implReset() implReset} method in order to perform any
* charset-specific reset actions.
*
* @return This encoder
*
*/
public final CharsetEncoder reset() {
implReset();
state = ST_RESET;
return this;
}
/**
* Resets this encoder, clearing any charset-specific internal state.
*
* The default implementation of this method does nothing. This method
* should be overridden by encoders that maintain internal state.
*/
protected void implReset() { }
/**
* Encodes one or more characters into one or more bytes.
*
* This method encapsulates the basic encoding loop, encoding as many
* characters as possible until it either runs out of input, runs out of room
* in the output buffer, or encounters an encoding error. This method is
* invoked by the {@link #encode encode} method, which handles result
* interpretation and error recovery.
*
*
The buffers are read from, and written to, starting at their current
* positions. At most {@link Buffer#remaining in.remaining()} characters
* will be read, and at most {@link Buffer#remaining out.remaining()}
* bytes will be written. The buffers' positions will be advanced to
* reflect the characters read and the bytes written, but their marks and
* limits will not be modified.
*
*
This method returns a {@link CoderResult} object to describe its
* reason for termination, in the same manner as the {@link #encode encode}
* method. Most implementations of this method will handle encoding errors
* by returning an appropriate result object for interpretation by the
* {@link #encode encode} method. An optimized implementation may instead
* examine the relevant error action and implement that action itself.
*
*
An implementation of this method may perform arbitrary lookahead by
* returning {@link CoderResult#UNDERFLOW} until it receives sufficient
* input.
*
* @param in
* The input character buffer
*
* @param out
* The output byte buffer
*
* @return A coder-result object describing the reason for termination
*/
protected abstract CoderResult encodeLoop(CharBuffer in,
ByteBuffer out);
/**
* Convenience method that encodes the remaining content of a single input
* character buffer into a newly-allocated byte buffer.
*
* This method implements an entire encoding
* operation; that is, it resets this encoder, then it encodes the
* characters in the given character buffer, and finally it flushes this
* encoder. This method should therefore not be invoked if an encoding
* operation is already in progress.
*
* @param in
* The input character buffer
*
* @return A newly-allocated byte buffer containing the result of the
* encoding operation. The buffer's position will be zero and its
* limit will follow the last byte written.
*
* @throws IllegalStateException
* If an encoding operation is already in progress
*
* @throws MalformedInputException
* If the character sequence starting at the input buffer's current
* position is not a legal sixteen-bit Unicode sequence and the current malformed-input action
* is {@link CodingErrorAction#REPORT}
*
* @throws UnmappableCharacterException
* If the character sequence starting at the input buffer's current
* position cannot be mapped to an equivalent byte sequence and
* the current unmappable-character action is {@link
* CodingErrorAction#REPORT}
*/
public final ByteBuffer encode(CharBuffer in)
throws CharacterCodingException
{
int n = (int)(in.remaining() * averageBytesPerChar());
ByteBuffer out = ByteBuffer.allocate(n);
if ((n == 0) && (in.remaining() == 0))
return out;
reset();
for (;;) {
CoderResult cr = in.hasRemaining() ?
encode(in, out, true) : CoderResult.UNDERFLOW;
if (cr.isUnderflow())
cr = flush(out);
if (cr.isUnderflow())
break;
if (cr.isOverflow()) {
n = 2*n + 1; // Ensure progress; n might be 0!
ByteBuffer o = ByteBuffer.allocate(n);
out.flip();
o.put(out);
out = o;
continue;
}
cr.throwException();
}
out.flip();
return out;
}
private boolean canEncode(CharBuffer cb) {
// Empty buffers or char-sequences are always encodable by definition.
if (!cb.hasRemaining()) {
return true;
}
if (state == ST_FLUSHED)
reset();
else if (state != ST_RESET)
throwIllegalStateException(state, ST_CODING);
CodingErrorAction ma = malformedInputAction();
CodingErrorAction ua = unmappableCharacterAction();
try {
onMalformedInput(CodingErrorAction.REPORT);
onUnmappableCharacter(CodingErrorAction.REPORT);
// Android changed : Account for ignorable codepoints. ICU doesn't report
// an error, but will return an empty buffer.
ByteBuffer buf = encode(cb);
return buf.hasRemaining();
} catch (CharacterCodingException x) {
// fall through to return false.
} finally {
onMalformedInput(ma);
onUnmappableCharacter(ua);
reset();
}
return false;
}
/**
* Tells whether or not this encoder can encode the given character.
*
* This method returns false if the given character is a
* surrogate character; such characters can be interpreted only when they
* are members of a pair consisting of a high surrogate followed by a low
* surrogate. The {@link #canEncode(java.lang.CharSequence)
* canEncode(CharSequence)} method may be used to test whether or not a
* character sequence can be encoded.
*
*
This method may modify this encoder's state; it should therefore not
* be invoked if an encoding operation is already in
* progress.
*
*
The default implementation of this method is not very efficient; it
* should generally be overridden to improve performance.
*
* @return true if, and only if, this encoder can encode
* the given character
*
* @throws IllegalStateException
* If an encoding operation is already in progress
*/
public boolean canEncode(char c) {
CharBuffer cb = CharBuffer.allocate(1);
cb.put(c);
cb.flip();
return canEncode(cb);
}
/**
* Tells whether or not this encoder can encode the given character
* sequence.
*
* If this method returns false for a particular character
* sequence then more information about why the sequence cannot be encoded
* may be obtained by performing a full encoding
* operation.
*
*
This method may modify this encoder's state; it should therefore not
* be invoked if an encoding operation is already in progress.
*
*
The default implementation of this method is not very efficient; it
* should generally be overridden to improve performance.
*
* @return true if, and only if, this encoder can encode
* the given character without throwing any exceptions and without
* performing any replacements
*
* @throws IllegalStateException
* If an encoding operation is already in progress
*/
public boolean canEncode(CharSequence cs) {
CharBuffer cb;
if (cs instanceof CharBuffer)
cb = ((CharBuffer)cs).duplicate();
else
cb = CharBuffer.wrap(cs);
return canEncode(cb);
}
private void throwIllegalStateException(int from, int to) {
throw new IllegalStateException("Current state = " + stateNames[from]
+ ", new state = " + stateNames[to]);
}
}