The actual result type is {@code Class} * where {@code |X|} is the erasure of the static type of the * expression on which {@code getClass} is called. For * example, no cast is required in this code fragment:
* *
* {@code Number n = 0; }
* {@code Class c = n.getClass(); }
*
* The general contract of {@code hashCode} is: *
* As much as is reasonably practical, the hashCode method defined by * class {@code Object} does return distinct integers for distinct * objects. (This is typically implemented by converting the internal * address of the object into an integer, but this implementation * technique is not required by the * JavaTM programming language.) * * @return a hash code value for this object. * @see java.lang.Object#equals(java.lang.Object) * @see java.lang.System#identityHashCode */ public int hashCode() { int lockWord = shadow$_monitor_; final int lockWordStateMask = 0xC0000000; // Top 2 bits. final int lockWordStateHash = 0x80000000; // Top 2 bits are value 2 (kStateHash). final int lockWordHashMask = 0x0FFFFFFF; // Low 28 bits. if ((lockWord & lockWordStateMask) == lockWordStateHash) { return lockWord & lockWordHashMask; } return System.identityHashCode(this); } /** * Indicates whether some other object is "equal to" this one. *
* The {@code equals} method implements an equivalence relation * on non-null object references: *
* The {@code equals} method for class {@code Object} implements * the most discriminating possible equivalence relation on objects; * that is, for any non-null reference values {@code x} and * {@code y}, this method returns {@code true} if and only * if {@code x} and {@code y} refer to the same object * ({@code x == y} has the value {@code true}). *
* Note that it is generally necessary to override the {@code hashCode} * method whenever this method is overridden, so as to maintain the * general contract for the {@code hashCode} method, which states * that equal objects must have equal hash codes. * * @param obj the reference object with which to compare. * @return {@code true} if this object is the same as the obj * argument; {@code false} otherwise. * @see #hashCode() * @see java.util.HashMap */ public boolean equals(Object obj) { return (this == obj); } /** * Creates and returns a copy of this object. The precise meaning * of "copy" may depend on the class of the object. The general * intent is that, for any object {@code x}, the expression: *
*
* x.clone() != x
* will be true, and that the expression:
*
*
* x.clone().getClass() == x.getClass()
* will be {@code true}, but these are not absolute requirements.
* While it is typically the case that:
*
*
* x.clone().equals(x)
* will be {@code true}, this is not an absolute requirement.
* * By convention, the returned object should be obtained by calling * {@code super.clone}. If a class and all of its superclasses (except * {@code Object}) obey this convention, it will be the case that * {@code x.clone().getClass() == x.getClass()}. *
* By convention, the object returned by this method should be independent * of this object (which is being cloned). To achieve this independence, * it may be necessary to modify one or more fields of the object returned * by {@code super.clone} before returning it. Typically, this means * copying any mutable objects that comprise the internal "deep structure" * of the object being cloned and replacing the references to these * objects with references to the copies. If a class contains only * primitive fields or references to immutable objects, then it is usually * the case that no fields in the object returned by {@code super.clone} * need to be modified. *
* The method {@code clone} for class {@code Object} performs a * specific cloning operation. First, if the class of this object does * not implement the interface {@code Cloneable}, then a * {@code CloneNotSupportedException} is thrown. Note that all arrays * are considered to implement the interface {@code Cloneable} and that * the return type of the {@code clone} method of an array type {@code T[]} * is {@code T[]} where T is any reference or primitive type. * Otherwise, this method creates a new instance of the class of this * object and initializes all its fields with exactly the contents of * the corresponding fields of this object, as if by assignment; the * contents of the fields are not themselves cloned. Thus, this method * performs a "shallow copy" of this object, not a "deep copy" operation. *
* The class {@code Object} does not itself implement the interface * {@code Cloneable}, so calling the {@code clone} method on an object * whose class is {@code Object} will result in throwing an * exception at run time. * * @return a clone of this instance. * @exception CloneNotSupportedException if the object's class does not * support the {@code Cloneable} interface. Subclasses * that override the {@code clone} method can also * throw this exception to indicate that an instance cannot * be cloned. * @see java.lang.Cloneable */ protected Object clone() throws CloneNotSupportedException { if (!(this instanceof Cloneable)) { throw new CloneNotSupportedException("Class " + getClass().getName() + " doesn't implement Cloneable"); } return internalClone(); } /* * Native helper method for cloning. */ private native Object internalClone(); /** * Returns a string representation of the object. In general, the * {@code toString} method returns a string that * "textually represents" this object. The result should * be a concise but informative representation that is easy for a * person to read. * It is recommended that all subclasses override this method. *
* The {@code toString} method for class {@code Object} * returns a string consisting of the name of the class of which the * object is an instance, the at-sign character `{@code @}', and * the unsigned hexadecimal representation of the hash code of the * object. In other words, this method returns a string equal to the * value of: *
*
* getClass().getName() + '@' + Integer.toHexString(hashCode())
*
*
* @return a string representation of the object.
*/
public String toString() {
return getClass().getName() + "@" + Integer.toHexString(hashCode());
}
/**
* Wakes up a single thread that is waiting on this object's
* monitor. If any threads are waiting on this object, one of them
* is chosen to be awakened. The choice is arbitrary and occurs at
* the discretion of the implementation. A thread waits on an object's
* monitor by calling one of the {@code wait} methods.
* * The awakened thread will not be able to proceed until the current * thread relinquishes the lock on this object. The awakened thread will * compete in the usual manner with any other threads that might be * actively competing to synchronize on this object; for example, the * awakened thread enjoys no reliable privilege or disadvantage in being * the next thread to lock this object. *
* This method should only be called by a thread that is the owner * of this object's monitor. A thread becomes the owner of the * object's monitor in one of three ways: *
* Only one thread at a time can own an object's monitor. * * @exception IllegalMonitorStateException if the current thread is not * the owner of this object's monitor. * @see java.lang.Object#notifyAll() * @see java.lang.Object#wait() */ public final native void notify(); /** * Wakes up all threads that are waiting on this object's monitor. A * thread waits on an object's monitor by calling one of the * {@code wait} methods. *
* The awakened threads will not be able to proceed until the current * thread relinquishes the lock on this object. The awakened threads * will compete in the usual manner with any other threads that might * be actively competing to synchronize on this object; for example, * the awakened threads enjoy no reliable privilege or disadvantage in * being the next thread to lock this object. *
* This method should only be called by a thread that is the owner * of this object's monitor. See the {@code notify} method for a * description of the ways in which a thread can become the owner of * a monitor. * * @exception IllegalMonitorStateException if the current thread is not * the owner of this object's monitor. * @see java.lang.Object#notify() * @see java.lang.Object#wait() */ public final native void notifyAll(); /** * Causes the current thread to wait until either another thread invokes the * {@link java.lang.Object#notify()} method or the * {@link java.lang.Object#notifyAll()} method for this object, or a * specified amount of time has elapsed. *
* The current thread must own this object's monitor. *
* This method causes the current thread (call it T) to * place itself in the wait set for this object and then to relinquish * any and all synchronization claims on this object. Thread T * becomes disabled for thread scheduling purposes and lies dormant * until one of four things happens: *
* A thread can also wake up without being notified, interrupted, or * timing out, a so-called spurious wakeup. While this will rarely * occur in practice, applications must guard against it by testing for * the condition that should have caused the thread to be awakened, and * continuing to wait if the condition is not satisfied. In other words, * waits should always occur in loops, like this one: *
* synchronized (obj) {
* while (<condition does not hold>)
* obj.wait(timeout);
* ... // Perform action appropriate to condition
* }
*
* (For more information on this topic, see Section 3.2.3 in Doug Lea's
* "Concurrent Programming in Java (Second Edition)" (Addison-Wesley,
* 2000), or Item 50 in Joshua Bloch's "Effective Java Programming
* Language Guide" (Addison-Wesley, 2001).
*
* If the current thread is {@linkplain java.lang.Thread#interrupt() * interrupted} by any thread before or while it is waiting, then an * {@code InterruptedException} is thrown. This exception is not * thrown until the lock status of this object has been restored as * described above. * *
* Note that the {@code wait} method, as it places the current thread * into the wait set for this object, unlocks only this object; any * other objects on which the current thread may be synchronized remain * locked while the thread waits. *
* This method should only be called by a thread that is the owner * of this object's monitor. See the {@code notify} method for a * description of the ways in which a thread can become the owner of * a monitor. * * @param millis the maximum time to wait in milliseconds. * @exception IllegalArgumentException if the value of timeout is * negative. * @exception IllegalMonitorStateException if the current thread is not * the owner of the object's monitor. * @exception InterruptedException if any thread interrupted the * current thread before or while the current thread * was waiting for a notification. The interrupted * status of the current thread is cleared when * this exception is thrown. * @see java.lang.Object#notify() * @see java.lang.Object#notifyAll() */ public final void wait(long millis) throws InterruptedException { wait(millis, 0); } /** * Causes the current thread to wait until another thread invokes the * {@link java.lang.Object#notify()} method or the * {@link java.lang.Object#notifyAll()} method for this object, or * some other thread interrupts the current thread, or a certain * amount of real time has elapsed. *
* This method is similar to the {@code wait} method of one * argument, but it allows finer control over the amount of time to * wait for a notification before giving up. The amount of real time, * measured in nanoseconds, is given by: *
*
* 1000000*timeout+nanos
* * In all other respects, this method does the same thing as the * method {@link #wait(long)} of one argument. In particular, * {@code wait(0, 0)} means the same thing as {@code wait(0)}. *
* The current thread must own this object's monitor. The thread * releases ownership of this monitor and waits until either of the * following two conditions has occurred: *
* The thread then waits until it can re-obtain ownership of the * monitor and resumes execution. *
* As in the one argument version, interrupts and spurious wakeups are * possible, and this method should always be used in a loop: *
* synchronized (obj) {
* while (<condition does not hold>)
* obj.wait(timeout, nanos);
* ... // Perform action appropriate to condition
* }
*
* This method should only be called by a thread that is the owner
* of this object's monitor. See the {@code notify} method for a
* description of the ways in which a thread can become the owner of
* a monitor.
*
* @param millis the maximum time to wait in milliseconds.
* @param nanos additional time, in nanoseconds range
* 0-999999.
* @exception IllegalArgumentException if the value of timeout is
* negative or the value of nanos is
* not in the range 0-999999.
* @exception IllegalMonitorStateException if the current thread is not
* the owner of this object's monitor.
* @exception InterruptedException if any thread interrupted the
* current thread before or while the current thread
* was waiting for a notification. The interrupted
* status of the current thread is cleared when
* this exception is thrown.
*/
public final native void wait(long millis, int nanos) throws InterruptedException;
/**
* Causes the current thread to wait until another thread invokes the
* {@link java.lang.Object#notify()} method or the
* {@link java.lang.Object#notifyAll()} method for this object.
* In other words, this method behaves exactly as if it simply
* performs the call {@code wait(0)}.
* * The current thread must own this object's monitor. The thread * releases ownership of this monitor and waits until another thread * notifies threads waiting on this object's monitor to wake up * either through a call to the {@code notify} method or the * {@code notifyAll} method. The thread then waits until it can * re-obtain ownership of the monitor and resumes execution. *
* As in the one argument version, interrupts and spurious wakeups are * possible, and this method should always be used in a loop: *
* synchronized (obj) {
* while (<condition does not hold>)
* obj.wait();
* ... // Perform action appropriate to condition
* }
*
* This method should only be called by a thread that is the owner
* of this object's monitor. See the {@code notify} method for a
* description of the ways in which a thread can become the owner of
* a monitor.
*
* @exception IllegalMonitorStateException if the current thread is not
* the owner of the object's monitor.
* @exception InterruptedException if any thread interrupted the
* current thread before or while the current thread
* was waiting for a notification. The interrupted
* status of the current thread is cleared when
* this exception is thrown.
* @see java.lang.Object#notify()
* @see java.lang.Object#notifyAll()
*/
public final native void wait() throws InterruptedException;
/**
* Called by the garbage collector on an object when garbage collection
* determines that there are no more references to the object.
* A subclass overrides the {@code finalize} method to dispose of
* system resources or to perform other cleanup.
* * The general contract of {@code finalize} is that it is invoked * if and when the JavaTM virtual * machine has determined that there is no longer any * means by which this object can be accessed by any thread that has * not yet died, except as a result of an action taken by the * finalization of some other object or class which is ready to be * finalized. The {@code finalize} method may take any action, including * making this object available again to other threads; the usual purpose * of {@code finalize}, however, is to perform cleanup actions before * the object is irrevocably discarded. For example, the finalize method * for an object that represents an input/output connection might perform * explicit I/O transactions to break the connection before the object is * permanently discarded. *
* The {@code finalize} method of class {@code Object} performs no * special action; it simply returns normally. Subclasses of * {@code Object} may override this definition. *
* The Java programming language does not guarantee which thread will * invoke the {@code finalize} method for any given object. It is * guaranteed, however, that the thread that invokes finalize will not * be holding any user-visible synchronization locks when finalize is * invoked. If an uncaught exception is thrown by the finalize method, * the exception is ignored and finalization of that object terminates. *
* After the {@code finalize} method has been invoked for an object, no * further action is taken until the Java virtual machine has again * determined that there is no longer any means by which this object can * be accessed by any thread that has not yet died, including possible * actions by other objects or classes which are ready to be finalized, * at which point the object may be discarded. *
* The {@code finalize} method is never invoked more than once by a Java * virtual machine for any given object. *
* Any exception thrown by the {@code finalize} method causes * the finalization of this object to be halted, but is otherwise * ignored. * * @throws Throwable the {@code Exception} raised by this method */ protected void finalize() throws Throwable { } }