/* * Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. Oracle designates this * particular file as subject to the "Classpath" exception as provided * by Oracle in the LICENSE file that accompanied this code. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. */ /* * This file is available under and governed by the GNU General Public * License version 2 only, as published by the Free Software Foundation. * However, the following notice accompanied the original version of this * file: * * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * * Neither the name of JSR-310 nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ package java.time; import static java.time.LocalTime.SECONDS_PER_DAY; import static java.time.temporal.ChronoField.ALIGNED_DAY_OF_WEEK_IN_MONTH; import static java.time.temporal.ChronoField.ALIGNED_DAY_OF_WEEK_IN_YEAR; import static java.time.temporal.ChronoField.ALIGNED_WEEK_OF_MONTH; import static java.time.temporal.ChronoField.ALIGNED_WEEK_OF_YEAR; import static java.time.temporal.ChronoField.DAY_OF_MONTH; import static java.time.temporal.ChronoField.DAY_OF_YEAR; import static java.time.temporal.ChronoField.EPOCH_DAY; import static java.time.temporal.ChronoField.ERA; import static java.time.temporal.ChronoField.MONTH_OF_YEAR; import static java.time.temporal.ChronoField.PROLEPTIC_MONTH; import static java.time.temporal.ChronoField.YEAR; import java.io.DataInput; import java.io.DataOutput; import java.io.IOException; import java.io.InvalidObjectException; import java.io.ObjectInputStream; import java.io.Serializable; import java.time.chrono.ChronoLocalDate; import java.time.chrono.Era; import java.time.chrono.IsoChronology; import java.time.format.DateTimeFormatter; import java.time.format.DateTimeParseException; import java.time.temporal.ChronoField; import java.time.temporal.ChronoUnit; import java.time.temporal.Temporal; import java.time.temporal.TemporalAccessor; import java.time.temporal.TemporalAdjuster; import java.time.temporal.TemporalAmount; import java.time.temporal.TemporalField; import java.time.temporal.TemporalQueries; import java.time.temporal.TemporalQuery; import java.time.temporal.TemporalUnit; import java.time.temporal.UnsupportedTemporalTypeException; import java.time.temporal.ValueRange; import java.time.zone.ZoneOffsetTransition; import java.time.zone.ZoneRules; import java.util.Objects; // Android-changed: removed ValueBased paragraph. /** * A date without a time-zone in the ISO-8601 calendar system, * such as {@code 2007-12-03}. *
* {@code LocalDate} is an immutable date-time object that represents a date, * often viewed as year-month-day. Other date fields, such as day-of-year, * day-of-week and week-of-year, can also be accessed. * For example, the value "2nd October 2007" can be stored in a {@code LocalDate}. *
* This class does not store or represent a time or time-zone. * Instead, it is a description of the date, as used for birthdays. * It cannot represent an instant on the time-line without additional information * such as an offset or time-zone. *
* The ISO-8601 calendar system is the modern civil calendar system used today * in most of the world. It is equivalent to the proleptic Gregorian calendar * system, in which today's rules for leap years are applied for all time. * For most applications written today, the ISO-8601 rules are entirely suitable. * However, any application that makes use of historical dates, and requires them * to be accurate will find the ISO-8601 approach unsuitable. * * @implSpec * This class is immutable and thread-safe. * * @since 1.8 */ public final class LocalDate implements Temporal, TemporalAdjuster, ChronoLocalDate, Serializable { /** * The minimum supported {@code LocalDate}, '-999999999-01-01'. * This could be used by an application as a "far past" date. */ public static final LocalDate MIN = LocalDate.of(Year.MIN_VALUE, 1, 1); /** * The maximum supported {@code LocalDate}, '+999999999-12-31'. * This could be used by an application as a "far future" date. */ public static final LocalDate MAX = LocalDate.of(Year.MAX_VALUE, 12, 31); /** * Serialization version. */ private static final long serialVersionUID = 2942565459149668126L; /** * The number of days in a 400 year cycle. */ private static final int DAYS_PER_CYCLE = 146097; /** * The number of days from year zero to year 1970. * There are five 400 year cycles from year zero to 2000. * There are 7 leap years from 1970 to 2000. */ static final long DAYS_0000_TO_1970 = (DAYS_PER_CYCLE * 5L) - (30L * 365L + 7L); /** * The year. */ private final int year; /** * The month-of-year. */ private final short month; /** * The day-of-month. */ private final short day; //----------------------------------------------------------------------- /** * Obtains the current date from the system clock in the default time-zone. *
* This will query the {@link Clock#systemDefaultZone() system clock} in the default * time-zone to obtain the current date. *
* Using this method will prevent the ability to use an alternate clock for testing * because the clock is hard-coded. * * @return the current date using the system clock and default time-zone, not null */ public static LocalDate now() { return now(Clock.systemDefaultZone()); } /** * Obtains the current date from the system clock in the specified time-zone. *
* This will query the {@link Clock#system(ZoneId) system clock} to obtain the current date. * Specifying the time-zone avoids dependence on the default time-zone. *
* Using this method will prevent the ability to use an alternate clock for testing * because the clock is hard-coded. * * @param zone the zone ID to use, not null * @return the current date using the system clock, not null */ public static LocalDate now(ZoneId zone) { return now(Clock.system(zone)); } /** * Obtains the current date from the specified clock. *
* This will query the specified clock to obtain the current date - today. * Using this method allows the use of an alternate clock for testing. * The alternate clock may be introduced using {@link Clock dependency injection}. * * @param clock the clock to use, not null * @return the current date, not null */ public static LocalDate now(Clock clock) { Objects.requireNonNull(clock, "clock"); // inline to avoid creating object and Instant checks final Instant now = clock.instant(); // called once ZoneOffset offset = clock.getZone().getRules().getOffset(now); long epochSec = now.getEpochSecond() + offset.getTotalSeconds(); // overflow caught later long epochDay = Math.floorDiv(epochSec, SECONDS_PER_DAY); return LocalDate.ofEpochDay(epochDay); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalDate} from a year, month and day. *
* This returns a {@code LocalDate} with the specified year, month and day-of-month. * The day must be valid for the year and month, otherwise an exception will be thrown. * * @param year the year to represent, from MIN_YEAR to MAX_YEAR * @param month the month-of-year to represent, not null * @param dayOfMonth the day-of-month to represent, from 1 to 31 * @return the local date, not null * @throws DateTimeException if the value of any field is out of range, * or if the day-of-month is invalid for the month-year */ public static LocalDate of(int year, Month month, int dayOfMonth) { YEAR.checkValidValue(year); Objects.requireNonNull(month, "month"); DAY_OF_MONTH.checkValidValue(dayOfMonth); return create(year, month.getValue(), dayOfMonth); } /** * Obtains an instance of {@code LocalDate} from a year, month and day. *
* This returns a {@code LocalDate} with the specified year, month and day-of-month. * The day must be valid for the year and month, otherwise an exception will be thrown. * * @param year the year to represent, from MIN_YEAR to MAX_YEAR * @param month the month-of-year to represent, from 1 (January) to 12 (December) * @param dayOfMonth the day-of-month to represent, from 1 to 31 * @return the local date, not null * @throws DateTimeException if the value of any field is out of range, * or if the day-of-month is invalid for the month-year */ public static LocalDate of(int year, int month, int dayOfMonth) { YEAR.checkValidValue(year); MONTH_OF_YEAR.checkValidValue(month); DAY_OF_MONTH.checkValidValue(dayOfMonth); return create(year, month, dayOfMonth); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalDate} from a year and day-of-year. *
* This returns a {@code LocalDate} with the specified year and day-of-year. * The day-of-year must be valid for the year, otherwise an exception will be thrown. * * @param year the year to represent, from MIN_YEAR to MAX_YEAR * @param dayOfYear the day-of-year to represent, from 1 to 366 * @return the local date, not null * @throws DateTimeException if the value of any field is out of range, * or if the day-of-year is invalid for the year */ public static LocalDate ofYearDay(int year, int dayOfYear) { YEAR.checkValidValue(year); DAY_OF_YEAR.checkValidValue(dayOfYear); boolean leap = IsoChronology.INSTANCE.isLeapYear(year); if (dayOfYear == 366 && leap == false) { throw new DateTimeException("Invalid date 'DayOfYear 366' as '" + year + "' is not a leap year"); } Month moy = Month.of((dayOfYear - 1) / 31 + 1); int monthEnd = moy.firstDayOfYear(leap) + moy.length(leap) - 1; if (dayOfYear > monthEnd) { moy = moy.plus(1); } int dom = dayOfYear - moy.firstDayOfYear(leap) + 1; return new LocalDate(year, moy.getValue(), dom); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalDate} from the epoch day count. *
* This returns a {@code LocalDate} with the specified epoch-day. * The {@link ChronoField#EPOCH_DAY EPOCH_DAY} is a simple incrementing count * of days where day 0 is 1970-01-01. Negative numbers represent earlier days. * * @param epochDay the Epoch Day to convert, based on the epoch 1970-01-01 * @return the local date, not null * @throws DateTimeException if the epoch day exceeds the supported date range */ public static LocalDate ofEpochDay(long epochDay) { long zeroDay = epochDay + DAYS_0000_TO_1970; // find the march-based year zeroDay -= 60; // adjust to 0000-03-01 so leap day is at end of four year cycle long adjust = 0; if (zeroDay < 0) { // adjust negative years to positive for calculation long adjustCycles = (zeroDay + 1) / DAYS_PER_CYCLE - 1; adjust = adjustCycles * 400; zeroDay += -adjustCycles * DAYS_PER_CYCLE; } long yearEst = (400 * zeroDay + 591) / DAYS_PER_CYCLE; long doyEst = zeroDay - (365 * yearEst + yearEst / 4 - yearEst / 100 + yearEst / 400); if (doyEst < 0) { // fix estimate yearEst--; doyEst = zeroDay - (365 * yearEst + yearEst / 4 - yearEst / 100 + yearEst / 400); } yearEst += adjust; // reset any negative year int marchDoy0 = (int) doyEst; // convert march-based values back to january-based int marchMonth0 = (marchDoy0 * 5 + 2) / 153; int month = (marchMonth0 + 2) % 12 + 1; int dom = marchDoy0 - (marchMonth0 * 306 + 5) / 10 + 1; yearEst += marchMonth0 / 10; // check year now we are certain it is correct int year = YEAR.checkValidIntValue(yearEst); return new LocalDate(year, month, dom); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalDate} from a temporal object. *
* This obtains a local date based on the specified temporal. * A {@code TemporalAccessor} represents an arbitrary set of date and time information, * which this factory converts to an instance of {@code LocalDate}. *
* The conversion uses the {@link TemporalQueries#localDate()} query, which relies * on extracting the {@link ChronoField#EPOCH_DAY EPOCH_DAY} field. *
* This method matches the signature of the functional interface {@link TemporalQuery} * allowing it to be used as a query via method reference, {@code LocalDate::from}. * * @param temporal the temporal object to convert, not null * @return the local date, not null * @throws DateTimeException if unable to convert to a {@code LocalDate} */ public static LocalDate from(TemporalAccessor temporal) { Objects.requireNonNull(temporal, "temporal"); LocalDate date = temporal.query(TemporalQueries.localDate()); if (date == null) { throw new DateTimeException("Unable to obtain LocalDate from TemporalAccessor: " + temporal + " of type " + temporal.getClass().getName()); } return date; } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalDate} from a text string such as {@code 2007-12-03}. *
* The string must represent a valid date and is parsed using * {@link java.time.format.DateTimeFormatter#ISO_LOCAL_DATE}. * * @param text the text to parse such as "2007-12-03", not null * @return the parsed local date, not null * @throws DateTimeParseException if the text cannot be parsed */ public static LocalDate parse(CharSequence text) { return parse(text, DateTimeFormatter.ISO_LOCAL_DATE); } /** * Obtains an instance of {@code LocalDate} from a text string using a specific formatter. *
* The text is parsed using the formatter, returning a date. * * @param text the text to parse, not null * @param formatter the formatter to use, not null * @return the parsed local date, not null * @throws DateTimeParseException if the text cannot be parsed */ public static LocalDate parse(CharSequence text, DateTimeFormatter formatter) { Objects.requireNonNull(formatter, "formatter"); return formatter.parse(text, LocalDate::from); } //----------------------------------------------------------------------- /** * Creates a local date from the year, month and day fields. * * @param year the year to represent, validated from MIN_YEAR to MAX_YEAR * @param month the month-of-year to represent, from 1 to 12, validated * @param dayOfMonth the day-of-month to represent, validated from 1 to 31 * @return the local date, not null * @throws DateTimeException if the day-of-month is invalid for the month-year */ private static LocalDate create(int year, int month, int dayOfMonth) { if (dayOfMonth > 28) { int dom = 31; switch (month) { case 2: dom = (IsoChronology.INSTANCE.isLeapYear(year) ? 29 : 28); break; case 4: case 6: case 9: case 11: dom = 30; break; } if (dayOfMonth > dom) { if (dayOfMonth == 29) { throw new DateTimeException("Invalid date 'February 29' as '" + year + "' is not a leap year"); } else { throw new DateTimeException("Invalid date '" + Month.of(month).name() + " " + dayOfMonth + "'"); } } } return new LocalDate(year, month, dayOfMonth); } /** * Resolves the date, resolving days past the end of month. * * @param year the year to represent, validated from MIN_YEAR to MAX_YEAR * @param month the month-of-year to represent, validated from 1 to 12 * @param day the day-of-month to represent, validated from 1 to 31 * @return the resolved date, not null */ private static LocalDate resolvePreviousValid(int year, int month, int day) { switch (month) { case 2: day = Math.min(day, IsoChronology.INSTANCE.isLeapYear(year) ? 29 : 28); break; case 4: case 6: case 9: case 11: day = Math.min(day, 30); break; } return new LocalDate(year, month, day); } /** * Constructor, previously validated. * * @param year the year to represent, from MIN_YEAR to MAX_YEAR * @param month the month-of-year to represent, not null * @param dayOfMonth the day-of-month to represent, valid for year-month, from 1 to 31 */ private LocalDate(int year, int month, int dayOfMonth) { this.year = year; this.month = (short) month; this.day = (short) dayOfMonth; } //----------------------------------------------------------------------- /** * Checks if the specified field is supported. *
* This checks if this date can be queried for the specified field. * If false, then calling the {@link #range(TemporalField) range}, * {@link #get(TemporalField) get} and {@link #with(TemporalField, long)} * methods will throw an exception. *
* If the field is a {@link ChronoField} then the query is implemented here. * The supported fields are: *
* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)} * passing {@code this} as the argument. * Whether the field is supported is determined by the field. * * @param field the field to check, null returns false * @return true if the field is supported on this date, false if not */ @Override // override for Javadoc public boolean isSupported(TemporalField field) { return ChronoLocalDate.super.isSupported(field); } /** * Checks if the specified unit is supported. *
* This checks if the specified unit can be added to, or subtracted from, this date. * If false, then calling the {@link #plus(long, TemporalUnit)} and * {@link #minus(long, TemporalUnit) minus} methods will throw an exception. *
* If the unit is a {@link ChronoUnit} then the query is implemented here. * The supported units are: *
* If the unit is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)} * passing {@code this} as the argument. * Whether the unit is supported is determined by the unit. * * @param unit the unit to check, null returns false * @return true if the unit can be added/subtracted, false if not */ @Override // override for Javadoc public boolean isSupported(TemporalUnit unit) { return ChronoLocalDate.super.isSupported(unit); } //----------------------------------------------------------------------- /** * Gets the range of valid values for the specified field. *
* The range object expresses the minimum and maximum valid values for a field. * This date is used to enhance the accuracy of the returned range. * If it is not possible to return the range, because the field is not supported * or for some other reason, an exception is thrown. *
* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return * appropriate range instances. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *
* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)} * passing {@code this} as the argument. * Whether the range can be obtained is determined by the field. * * @param field the field to query the range for, not null * @return the range of valid values for the field, not null * @throws DateTimeException if the range for the field cannot be obtained * @throws UnsupportedTemporalTypeException if the field is not supported */ @Override public ValueRange range(TemporalField field) { if (field instanceof ChronoField) { ChronoField f = (ChronoField) field; if (f.isDateBased()) { switch (f) { case DAY_OF_MONTH: return ValueRange.of(1, lengthOfMonth()); case DAY_OF_YEAR: return ValueRange.of(1, lengthOfYear()); case ALIGNED_WEEK_OF_MONTH: return ValueRange.of(1, getMonth() == Month.FEBRUARY && isLeapYear() == false ? 4 : 5); case YEAR_OF_ERA: return (getYear() <= 0 ? ValueRange.of(1, Year.MAX_VALUE + 1) : ValueRange.of(1, Year.MAX_VALUE)); } return field.range(); } throw new UnsupportedTemporalTypeException("Unsupported field: " + field); } return field.rangeRefinedBy(this); } /** * Gets the value of the specified field from this date as an {@code int}. *
* This queries this date for the value of the specified field. * The returned value will always be within the valid range of values for the field. * If it is not possible to return the value, because the field is not supported * or for some other reason, an exception is thrown. *
* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return valid * values based on this date, except {@code EPOCH_DAY} and {@code PROLEPTIC_MONTH} * which are too large to fit in an {@code int} and throw a {@code DateTimeException}. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *
* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} * passing {@code this} as the argument. Whether the value can be obtained, * and what the value represents, is determined by the field. * * @param field the field to get, not null * @return the value for the field * @throws DateTimeException if a value for the field cannot be obtained or * the value is outside the range of valid values for the field * @throws UnsupportedTemporalTypeException if the field is not supported or * the range of values exceeds an {@code int} * @throws ArithmeticException if numeric overflow occurs */ @Override // override for Javadoc and performance public int get(TemporalField field) { if (field instanceof ChronoField) { return get0(field); } return ChronoLocalDate.super.get(field); } /** * Gets the value of the specified field from this date as a {@code long}. *
* This queries this date for the value of the specified field. * If it is not possible to return the value, because the field is not supported * or for some other reason, an exception is thrown. *
* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return valid * values based on this date. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *
* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} * passing {@code this} as the argument. Whether the value can be obtained, * and what the value represents, is determined by the field. * * @param field the field to get, not null * @return the value for the field * @throws DateTimeException if a value for the field cannot be obtained * @throws UnsupportedTemporalTypeException if the field is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public long getLong(TemporalField field) { if (field instanceof ChronoField) { if (field == EPOCH_DAY) { return toEpochDay(); } if (field == PROLEPTIC_MONTH) { return getProlepticMonth(); } return get0(field); } return field.getFrom(this); } private int get0(TemporalField field) { switch ((ChronoField) field) { case DAY_OF_WEEK: return getDayOfWeek().getValue(); case ALIGNED_DAY_OF_WEEK_IN_MONTH: return ((day - 1) % 7) + 1; case ALIGNED_DAY_OF_WEEK_IN_YEAR: return ((getDayOfYear() - 1) % 7) + 1; case DAY_OF_MONTH: return day; case DAY_OF_YEAR: return getDayOfYear(); case EPOCH_DAY: throw new UnsupportedTemporalTypeException("Invalid field 'EpochDay' for get() method, use getLong() instead"); case ALIGNED_WEEK_OF_MONTH: return ((day - 1) / 7) + 1; case ALIGNED_WEEK_OF_YEAR: return ((getDayOfYear() - 1) / 7) + 1; case MONTH_OF_YEAR: return month; case PROLEPTIC_MONTH: throw new UnsupportedTemporalTypeException("Invalid field 'ProlepticMonth' for get() method, use getLong() instead"); case YEAR_OF_ERA: return (year >= 1 ? year : 1 - year); case YEAR: return year; case ERA: return (year >= 1 ? 1 : 0); } throw new UnsupportedTemporalTypeException("Unsupported field: " + field); } private long getProlepticMonth() { return (year * 12L + month - 1); } //----------------------------------------------------------------------- /** * Gets the chronology of this date, which is the ISO calendar system. *
* The {@code Chronology} represents the calendar system in use. * The ISO-8601 calendar system is the modern civil calendar system used today * in most of the world. It is equivalent to the proleptic Gregorian calendar * system, in which today's rules for leap years are applied for all time. * * @return the ISO chronology, not null */ @Override public IsoChronology getChronology() { return IsoChronology.INSTANCE; } /** * Gets the era applicable at this date. *
* The official ISO-8601 standard does not define eras, however {@code IsoChronology} does. * It defines two eras, 'CE' from year one onwards and 'BCE' from year zero backwards. * Since dates before the Julian-Gregorian cutover are not in line with history, * the cutover between 'BCE' and 'CE' is also not aligned with the commonly used * eras, often referred to using 'BC' and 'AD'. *
* Users of this class should typically ignore this method as it exists primarily * to fulfill the {@link ChronoLocalDate} contract where it is necessary to support * the Japanese calendar system. *
* The returned era will be a singleton capable of being compared with the constants * in {@link IsoChronology} using the {@code ==} operator. * * @return the {@code IsoChronology} era constant applicable at this date, not null */ @Override // override for Javadoc public Era getEra() { return ChronoLocalDate.super.getEra(); } /** * Gets the year field. *
* This method returns the primitive {@code int} value for the year. *
* The year returned by this method is proleptic as per {@code get(YEAR)}. * To obtain the year-of-era, use {@code get(YEAR_OF_ERA)}. * * @return the year, from MIN_YEAR to MAX_YEAR */ public int getYear() { return year; } /** * Gets the month-of-year field from 1 to 12. *
* This method returns the month as an {@code int} from 1 to 12. * Application code is frequently clearer if the enum {@link Month} * is used by calling {@link #getMonth()}. * * @return the month-of-year, from 1 to 12 * @see #getMonth() */ public int getMonthValue() { return month; } /** * Gets the month-of-year field using the {@code Month} enum. *
* This method returns the enum {@link Month} for the month. * This avoids confusion as to what {@code int} values mean. * If you need access to the primitive {@code int} value then the enum * provides the {@link Month#getValue() int value}. * * @return the month-of-year, not null * @see #getMonthValue() */ public Month getMonth() { return Month.of(month); } /** * Gets the day-of-month field. *
* This method returns the primitive {@code int} value for the day-of-month. * * @return the day-of-month, from 1 to 31 */ public int getDayOfMonth() { return day; } /** * Gets the day-of-year field. *
* This method returns the primitive {@code int} value for the day-of-year. * * @return the day-of-year, from 1 to 365, or 366 in a leap year */ public int getDayOfYear() { return getMonth().firstDayOfYear(isLeapYear()) + day - 1; } /** * Gets the day-of-week field, which is an enum {@code DayOfWeek}. *
* This method returns the enum {@link DayOfWeek} for the day-of-week. * This avoids confusion as to what {@code int} values mean. * If you need access to the primitive {@code int} value then the enum * provides the {@link DayOfWeek#getValue() int value}. *
* Additional information can be obtained from the {@code DayOfWeek}. * This includes textual names of the values. * * @return the day-of-week, not null */ public DayOfWeek getDayOfWeek() { int dow0 = (int)Math.floorMod(toEpochDay() + 3, 7); return DayOfWeek.of(dow0 + 1); } //----------------------------------------------------------------------- /** * Checks if the year is a leap year, according to the ISO proleptic * calendar system rules. *
* This method applies the current rules for leap years across the whole time-line. * In general, a year is a leap year if it is divisible by four without * remainder. However, years divisible by 100, are not leap years, with * the exception of years divisible by 400 which are. *
* For example, 1904 is a leap year it is divisible by 4. * 1900 was not a leap year as it is divisible by 100, however 2000 was a * leap year as it is divisible by 400. *
* The calculation is proleptic - applying the same rules into the far future and far past. * This is historically inaccurate, but is correct for the ISO-8601 standard. * * @return true if the year is leap, false otherwise */ @Override // override for Javadoc and performance public boolean isLeapYear() { return IsoChronology.INSTANCE.isLeapYear(year); } /** * Returns the length of the month represented by this date. *
* This returns the length of the month in days. * For example, a date in January would return 31. * * @return the length of the month in days */ @Override public int lengthOfMonth() { switch (month) { case 2: return (isLeapYear() ? 29 : 28); case 4: case 6: case 9: case 11: return 30; default: return 31; } } /** * Returns the length of the year represented by this date. *
* This returns the length of the year in days, either 365 or 366. * * @return 366 if the year is leap, 365 otherwise */ @Override // override for Javadoc and performance public int lengthOfYear() { return (isLeapYear() ? 366 : 365); } //----------------------------------------------------------------------- /** * Returns an adjusted copy of this date. *
* This returns a {@code LocalDate}, based on this one, with the date adjusted. * The adjustment takes place using the specified adjuster strategy object. * Read the documentation of the adjuster to understand what adjustment will be made. *
* A simple adjuster might simply set the one of the fields, such as the year field. * A more complex adjuster might set the date to the last day of the month. *
* A selection of common adjustments is provided in * {@link java.time.temporal.TemporalAdjusters TemporalAdjusters}. * These include finding the "last day of the month" and "next Wednesday". * Key date-time classes also implement the {@code TemporalAdjuster} interface, * such as {@link Month} and {@link java.time.MonthDay MonthDay}. * The adjuster is responsible for handling special cases, such as the varying * lengths of month and leap years. *
* For example this code returns a date on the last day of July: *
* import static java.time.Month.*; * import static java.time.temporal.TemporalAdjusters.*; * * result = localDate.with(JULY).with(lastDayOfMonth()); **
* The result of this method is obtained by invoking the * {@link TemporalAdjuster#adjustInto(Temporal)} method on the * specified adjuster passing {@code this} as the argument. *
* This instance is immutable and unaffected by this method call. * * @param adjuster the adjuster to use, not null * @return a {@code LocalDate} based on {@code this} with the adjustment made, not null * @throws DateTimeException if the adjustment cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalDate with(TemporalAdjuster adjuster) { // optimizations if (adjuster instanceof LocalDate) { return (LocalDate) adjuster; } return (LocalDate) adjuster.adjustInto(this); } /** * Returns a copy of this date with the specified field set to a new value. *
* This returns a {@code LocalDate}, based on this one, with the value * for the specified field changed. * This can be used to change any supported field, such as the year, month or day-of-month. * If it is not possible to set the value, because the field is not supported or for * some other reason, an exception is thrown. *
* In some cases, changing the specified field can cause the resulting date to become invalid, * such as changing the month from 31st January to February would make the day-of-month invalid. * In cases like this, the field is responsible for resolving the date. Typically it will choose * the previous valid date, which would be the last valid day of February in this example. *
* If the field is a {@link ChronoField} then the adjustment is implemented here. * The supported fields behave as follows: *
* In all cases, if the new value is outside the valid range of values for the field * then a {@code DateTimeException} will be thrown. *
* All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *
* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)} * passing {@code this} as the argument. In this case, the field determines * whether and how to adjust the instant. *
* This instance is immutable and unaffected by this method call. * * @param field the field to set in the result, not null * @param newValue the new value of the field in the result * @return a {@code LocalDate} based on {@code this} with the specified field set, not null * @throws DateTimeException if the field cannot be set * @throws UnsupportedTemporalTypeException if the field is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalDate with(TemporalField field, long newValue) { if (field instanceof ChronoField) { ChronoField f = (ChronoField) field; f.checkValidValue(newValue); switch (f) { case DAY_OF_WEEK: return plusDays(newValue - getDayOfWeek().getValue()); case ALIGNED_DAY_OF_WEEK_IN_MONTH: return plusDays(newValue - getLong(ALIGNED_DAY_OF_WEEK_IN_MONTH)); case ALIGNED_DAY_OF_WEEK_IN_YEAR: return plusDays(newValue - getLong(ALIGNED_DAY_OF_WEEK_IN_YEAR)); case DAY_OF_MONTH: return withDayOfMonth((int) newValue); case DAY_OF_YEAR: return withDayOfYear((int) newValue); case EPOCH_DAY: return LocalDate.ofEpochDay(newValue); case ALIGNED_WEEK_OF_MONTH: return plusWeeks(newValue - getLong(ALIGNED_WEEK_OF_MONTH)); case ALIGNED_WEEK_OF_YEAR: return plusWeeks(newValue - getLong(ALIGNED_WEEK_OF_YEAR)); case MONTH_OF_YEAR: return withMonth((int) newValue); case PROLEPTIC_MONTH: return plusMonths(newValue - getProlepticMonth()); case YEAR_OF_ERA: return withYear((int) (year >= 1 ? newValue : 1 - newValue)); case YEAR: return withYear((int) newValue); case ERA: return (getLong(ERA) == newValue ? this : withYear(1 - year)); } throw new UnsupportedTemporalTypeException("Unsupported field: " + field); } return field.adjustInto(this, newValue); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code LocalDate} with the year altered. *
* If the day-of-month is invalid for the year, it will be changed to the last valid day of the month. *
* This instance is immutable and unaffected by this method call. * * @param year the year to set in the result, from MIN_YEAR to MAX_YEAR * @return a {@code LocalDate} based on this date with the requested year, not null * @throws DateTimeException if the year value is invalid */ public LocalDate withYear(int year) { if (this.year == year) { return this; } YEAR.checkValidValue(year); return resolvePreviousValid(year, month, day); } /** * Returns a copy of this {@code LocalDate} with the month-of-year altered. *
* If the day-of-month is invalid for the year, it will be changed to the last valid day of the month. *
* This instance is immutable and unaffected by this method call. * * @param month the month-of-year to set in the result, from 1 (January) to 12 (December) * @return a {@code LocalDate} based on this date with the requested month, not null * @throws DateTimeException if the month-of-year value is invalid */ public LocalDate withMonth(int month) { if (this.month == month) { return this; } MONTH_OF_YEAR.checkValidValue(month); return resolvePreviousValid(year, month, day); } /** * Returns a copy of this {@code LocalDate} with the day-of-month altered. *
* If the resulting date is invalid, an exception is thrown. *
* This instance is immutable and unaffected by this method call. * * @param dayOfMonth the day-of-month to set in the result, from 1 to 28-31 * @return a {@code LocalDate} based on this date with the requested day, not null * @throws DateTimeException if the day-of-month value is invalid, * or if the day-of-month is invalid for the month-year */ public LocalDate withDayOfMonth(int dayOfMonth) { if (this.day == dayOfMonth) { return this; } return of(year, month, dayOfMonth); } /** * Returns a copy of this {@code LocalDate} with the day-of-year altered. *
* If the resulting date is invalid, an exception is thrown. *
* This instance is immutable and unaffected by this method call. * * @param dayOfYear the day-of-year to set in the result, from 1 to 365-366 * @return a {@code LocalDate} based on this date with the requested day, not null * @throws DateTimeException if the day-of-year value is invalid, * or if the day-of-year is invalid for the year */ public LocalDate withDayOfYear(int dayOfYear) { if (this.getDayOfYear() == dayOfYear) { return this; } return ofYearDay(year, dayOfYear); } //----------------------------------------------------------------------- /** * Returns a copy of this date with the specified amount added. *
* This returns a {@code LocalDate}, based on this one, with the specified amount added. * The amount is typically {@link Period} but may be any other type implementing * the {@link TemporalAmount} interface. *
* The calculation is delegated to the amount object by calling * {@link TemporalAmount#addTo(Temporal)}. The amount implementation is free * to implement the addition in any way it wishes, however it typically * calls back to {@link #plus(long, TemporalUnit)}. Consult the documentation * of the amount implementation to determine if it can be successfully added. *
* This instance is immutable and unaffected by this method call. * * @param amountToAdd the amount to add, not null * @return a {@code LocalDate} based on this date with the addition made, not null * @throws DateTimeException if the addition cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalDate plus(TemporalAmount amountToAdd) { if (amountToAdd instanceof Period) { Period periodToAdd = (Period) amountToAdd; return plusMonths(periodToAdd.toTotalMonths()).plusDays(periodToAdd.getDays()); } Objects.requireNonNull(amountToAdd, "amountToAdd"); return (LocalDate) amountToAdd.addTo(this); } /** * Returns a copy of this date with the specified amount added. *
* This returns a {@code LocalDate}, based on this one, with the amount * in terms of the unit added. If it is not possible to add the amount, because the * unit is not supported or for some other reason, an exception is thrown. *
* In some cases, adding the amount can cause the resulting date to become invalid. * For example, adding one month to 31st January would result in 31st February. * In cases like this, the unit is responsible for resolving the date. * Typically it will choose the previous valid date, which would be the last valid * day of February in this example. *
* If the field is a {@link ChronoUnit} then the addition is implemented here. * The supported fields behave as follows: *
* All other {@code ChronoUnit} instances will throw an {@code UnsupportedTemporalTypeException}. *
* If the field is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)} * passing {@code this} as the argument. In this case, the unit determines * whether and how to perform the addition. *
* This instance is immutable and unaffected by this method call. * * @param amountToAdd the amount of the unit to add to the result, may be negative * @param unit the unit of the amount to add, not null * @return a {@code LocalDate} based on this date with the specified amount added, not null * @throws DateTimeException if the addition cannot be made * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalDate plus(long amountToAdd, TemporalUnit unit) { if (unit instanceof ChronoUnit) { ChronoUnit f = (ChronoUnit) unit; switch (f) { case DAYS: return plusDays(amountToAdd); case WEEKS: return plusWeeks(amountToAdd); case MONTHS: return plusMonths(amountToAdd); case YEARS: return plusYears(amountToAdd); case DECADES: return plusYears(Math.multiplyExact(amountToAdd, 10)); case CENTURIES: return plusYears(Math.multiplyExact(amountToAdd, 100)); case MILLENNIA: return plusYears(Math.multiplyExact(amountToAdd, 1000)); case ERAS: return with(ERA, Math.addExact(getLong(ERA), amountToAdd)); } throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit); } return unit.addTo(this, amountToAdd); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code LocalDate} with the specified number of years added. *
* This method adds the specified amount to the years field in three steps: *
* For example, 2008-02-29 (leap year) plus one year would result in the * invalid date 2009-02-29 (standard year). Instead of returning an invalid * result, the last valid day of the month, 2009-02-28, is selected instead. *
* This instance is immutable and unaffected by this method call. * * @param yearsToAdd the years to add, may be negative * @return a {@code LocalDate} based on this date with the years added, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate plusYears(long yearsToAdd) { if (yearsToAdd == 0) { return this; } int newYear = YEAR.checkValidIntValue(year + yearsToAdd); // safe overflow return resolvePreviousValid(newYear, month, day); } /** * Returns a copy of this {@code LocalDate} with the specified number of months added. *
* This method adds the specified amount to the months field in three steps: *
* For example, 2007-03-31 plus one month would result in the invalid date * 2007-04-31. Instead of returning an invalid result, the last valid day * of the month, 2007-04-30, is selected instead. *
* This instance is immutable and unaffected by this method call. * * @param monthsToAdd the months to add, may be negative * @return a {@code LocalDate} based on this date with the months added, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate plusMonths(long monthsToAdd) { if (monthsToAdd == 0) { return this; } long monthCount = year * 12L + (month - 1); long calcMonths = monthCount + monthsToAdd; // safe overflow int newYear = YEAR.checkValidIntValue(Math.floorDiv(calcMonths, 12)); int newMonth = (int)Math.floorMod(calcMonths, 12) + 1; return resolvePreviousValid(newYear, newMonth, day); } /** * Returns a copy of this {@code LocalDate} with the specified number of weeks added. *
* This method adds the specified amount in weeks to the days field incrementing * the month and year fields as necessary to ensure the result remains valid. * The result is only invalid if the maximum/minimum year is exceeded. *
* For example, 2008-12-31 plus one week would result in 2009-01-07. *
* This instance is immutable and unaffected by this method call. * * @param weeksToAdd the weeks to add, may be negative * @return a {@code LocalDate} based on this date with the weeks added, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate plusWeeks(long weeksToAdd) { return plusDays(Math.multiplyExact(weeksToAdd, 7)); } /** * Returns a copy of this {@code LocalDate} with the specified number of days added. *
* This method adds the specified amount to the days field incrementing the * month and year fields as necessary to ensure the result remains valid. * The result is only invalid if the maximum/minimum year is exceeded. *
* For example, 2008-12-31 plus one day would result in 2009-01-01. *
* This instance is immutable and unaffected by this method call. * * @param daysToAdd the days to add, may be negative * @return a {@code LocalDate} based on this date with the days added, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate plusDays(long daysToAdd) { if (daysToAdd == 0) { return this; } long mjDay = Math.addExact(toEpochDay(), daysToAdd); return LocalDate.ofEpochDay(mjDay); } //----------------------------------------------------------------------- /** * Returns a copy of this date with the specified amount subtracted. *
* This returns a {@code LocalDate}, based on this one, with the specified amount subtracted. * The amount is typically {@link Period} but may be any other type implementing * the {@link TemporalAmount} interface. *
* The calculation is delegated to the amount object by calling * {@link TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free * to implement the subtraction in any way it wishes, however it typically * calls back to {@link #minus(long, TemporalUnit)}. Consult the documentation * of the amount implementation to determine if it can be successfully subtracted. *
* This instance is immutable and unaffected by this method call. * * @param amountToSubtract the amount to subtract, not null * @return a {@code LocalDate} based on this date with the subtraction made, not null * @throws DateTimeException if the subtraction cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalDate minus(TemporalAmount amountToSubtract) { if (amountToSubtract instanceof Period) { Period periodToSubtract = (Period) amountToSubtract; return minusMonths(periodToSubtract.toTotalMonths()).minusDays(periodToSubtract.getDays()); } Objects.requireNonNull(amountToSubtract, "amountToSubtract"); return (LocalDate) amountToSubtract.subtractFrom(this); } /** * Returns a copy of this date with the specified amount subtracted. *
* This returns a {@code LocalDate}, based on this one, with the amount * in terms of the unit subtracted. If it is not possible to subtract the amount, * because the unit is not supported or for some other reason, an exception is thrown. *
* This method is equivalent to {@link #plus(long, TemporalUnit)} with the amount negated. * See that method for a full description of how addition, and thus subtraction, works. *
* This instance is immutable and unaffected by this method call. * * @param amountToSubtract the amount of the unit to subtract from the result, may be negative * @param unit the unit of the amount to subtract, not null * @return a {@code LocalDate} based on this date with the specified amount subtracted, not null * @throws DateTimeException if the subtraction cannot be made * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalDate minus(long amountToSubtract, TemporalUnit unit) { return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit)); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code LocalDate} with the specified number of years subtracted. *
* This method subtracts the specified amount from the years field in three steps: *
* For example, 2008-02-29 (leap year) minus one year would result in the * invalid date 2007-02-29 (standard year). Instead of returning an invalid * result, the last valid day of the month, 2007-02-28, is selected instead. *
* This instance is immutable and unaffected by this method call. * * @param yearsToSubtract the years to subtract, may be negative * @return a {@code LocalDate} based on this date with the years subtracted, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate minusYears(long yearsToSubtract) { return (yearsToSubtract == Long.MIN_VALUE ? plusYears(Long.MAX_VALUE).plusYears(1) : plusYears(-yearsToSubtract)); } /** * Returns a copy of this {@code LocalDate} with the specified number of months subtracted. *
* This method subtracts the specified amount from the months field in three steps: *
* For example, 2007-03-31 minus one month would result in the invalid date * 2007-02-31. Instead of returning an invalid result, the last valid day * of the month, 2007-02-28, is selected instead. *
* This instance is immutable and unaffected by this method call. * * @param monthsToSubtract the months to subtract, may be negative * @return a {@code LocalDate} based on this date with the months subtracted, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate minusMonths(long monthsToSubtract) { return (monthsToSubtract == Long.MIN_VALUE ? plusMonths(Long.MAX_VALUE).plusMonths(1) : plusMonths(-monthsToSubtract)); } /** * Returns a copy of this {@code LocalDate} with the specified number of weeks subtracted. *
* This method subtracts the specified amount in weeks from the days field decrementing * the month and year fields as necessary to ensure the result remains valid. * The result is only invalid if the maximum/minimum year is exceeded. *
* For example, 2009-01-07 minus one week would result in 2008-12-31. *
* This instance is immutable and unaffected by this method call. * * @param weeksToSubtract the weeks to subtract, may be negative * @return a {@code LocalDate} based on this date with the weeks subtracted, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate minusWeeks(long weeksToSubtract) { return (weeksToSubtract == Long.MIN_VALUE ? plusWeeks(Long.MAX_VALUE).plusWeeks(1) : plusWeeks(-weeksToSubtract)); } /** * Returns a copy of this {@code LocalDate} with the specified number of days subtracted. *
* This method subtracts the specified amount from the days field decrementing the * month and year fields as necessary to ensure the result remains valid. * The result is only invalid if the maximum/minimum year is exceeded. *
* For example, 2009-01-01 minus one day would result in 2008-12-31. *
* This instance is immutable and unaffected by this method call. * * @param daysToSubtract the days to subtract, may be negative * @return a {@code LocalDate} based on this date with the days subtracted, not null * @throws DateTimeException if the result exceeds the supported date range */ public LocalDate minusDays(long daysToSubtract) { return (daysToSubtract == Long.MIN_VALUE ? plusDays(Long.MAX_VALUE).plusDays(1) : plusDays(-daysToSubtract)); } //----------------------------------------------------------------------- /** * Queries this date using the specified query. *
* This queries this date using the specified query strategy object. * The {@code TemporalQuery} object defines the logic to be used to * obtain the result. Read the documentation of the query to understand * what the result of this method will be. *
* The result of this method is obtained by invoking the
* {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the
* specified query passing {@code this} as the argument.
*
* @param
* This returns a temporal object of the same observable type as the input
* with the date changed to be the same as this.
*
* The adjustment is equivalent to using {@link Temporal#with(TemporalField, long)}
* passing {@link ChronoField#EPOCH_DAY} as the field.
*
* In most cases, it is clearer to reverse the calling pattern by using
* {@link Temporal#with(TemporalAdjuster)}:
*
* This instance is immutable and unaffected by this method call.
*
* @param temporal the target object to be adjusted, not null
* @return the adjusted object, not null
* @throws DateTimeException if unable to make the adjustment
* @throws ArithmeticException if numeric overflow occurs
*/
@Override // override for Javadoc
public Temporal adjustInto(Temporal temporal) {
return ChronoLocalDate.super.adjustInto(temporal);
}
/**
* Calculates the amount of time until another date in terms of the specified unit.
*
* This calculates the amount of time between two {@code LocalDate}
* objects in terms of a single {@code TemporalUnit}.
* The start and end points are {@code this} and the specified date.
* The result will be negative if the end is before the start.
* The {@code Temporal} passed to this method is converted to a
* {@code LocalDate} using {@link #from(TemporalAccessor)}.
* For example, the amount in days between two dates can be calculated
* using {@code startDate.until(endDate, DAYS)}.
*
* The calculation returns a whole number, representing the number of
* complete units between the two dates.
* For example, the amount in months between 2012-06-15 and 2012-08-14
* will only be one month as it is one day short of two months.
*
* There are two equivalent ways of using this method.
* The first is to invoke this method.
* The second is to use {@link TemporalUnit#between(Temporal, Temporal)}:
*
* The calculation is implemented in this method for {@link ChronoUnit}.
* The units {@code DAYS}, {@code WEEKS}, {@code MONTHS}, {@code YEARS},
* {@code DECADES}, {@code CENTURIES}, {@code MILLENNIA} and {@code ERAS}
* are supported. Other {@code ChronoUnit} values will throw an exception.
*
* If the unit is not a {@code ChronoUnit}, then the result of this method
* is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)}
* passing {@code this} as the first argument and the converted input temporal
* as the second argument.
*
* This instance is immutable and unaffected by this method call.
*
* @param endExclusive the end date, exclusive, which is converted to a {@code LocalDate}, not null
* @param unit the unit to measure the amount in, not null
* @return the amount of time between this date and the end date
* @throws DateTimeException if the amount cannot be calculated, or the end
* temporal cannot be converted to a {@code LocalDate}
* @throws UnsupportedTemporalTypeException if the unit is not supported
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public long until(Temporal endExclusive, TemporalUnit unit) {
LocalDate end = LocalDate.from(endExclusive);
if (unit instanceof ChronoUnit) {
switch ((ChronoUnit) unit) {
case DAYS: return daysUntil(end);
case WEEKS: return daysUntil(end) / 7;
case MONTHS: return monthsUntil(end);
case YEARS: return monthsUntil(end) / 12;
case DECADES: return monthsUntil(end) / 120;
case CENTURIES: return monthsUntil(end) / 1200;
case MILLENNIA: return monthsUntil(end) / 12000;
case ERAS: return end.getLong(ERA) - getLong(ERA);
}
throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit);
}
return unit.between(this, end);
}
long daysUntil(LocalDate end) {
return end.toEpochDay() - toEpochDay(); // no overflow
}
private long monthsUntil(LocalDate end) {
long packed1 = getProlepticMonth() * 32L + getDayOfMonth(); // no overflow
long packed2 = end.getProlepticMonth() * 32L + end.getDayOfMonth(); // no overflow
return (packed2 - packed1) / 32;
}
/**
* Calculates the period between this date and another date as a {@code Period}.
*
* This calculates the period between two dates in terms of years, months and days.
* The start and end points are {@code this} and the specified date.
* The result will be negative if the end is before the start.
* The negative sign will be the same in each of year, month and day.
*
* The calculation is performed using the ISO calendar system.
* If necessary, the input date will be converted to ISO.
*
* The start date is included, but the end date is not.
* The period is calculated by removing complete months, then calculating
* the remaining number of days, adjusting to ensure that both have the same sign.
* The number of months is then normalized into years and months based on a 12 month year.
* A month is considered to be complete if the end day-of-month is greater
* than or equal to the start day-of-month.
* For example, from {@code 2010-01-15} to {@code 2011-03-18} is "1 year, 2 months and 3 days".
*
* There are two equivalent ways of using this method.
* The first is to invoke this method.
* The second is to use {@link Period#between(LocalDate, LocalDate)}:
*
* This date will be passed to the formatter to produce a string.
*
* @param formatter the formatter to use, not null
* @return the formatted date string, not null
* @throws DateTimeException if an error occurs during printing
*/
@Override // override for Javadoc and performance
public String format(DateTimeFormatter formatter) {
Objects.requireNonNull(formatter, "formatter");
return formatter.format(this);
}
//-----------------------------------------------------------------------
/**
* Combines this date with a time to create a {@code LocalDateTime}.
*
* This returns a {@code LocalDateTime} formed from this date at the specified time.
* All possible combinations of date and time are valid.
*
* @param time the time to combine with, not null
* @return the local date-time formed from this date and the specified time, not null
*/
@Override
public LocalDateTime atTime(LocalTime time) {
return LocalDateTime.of(this, time);
}
/**
* Combines this date with a time to create a {@code LocalDateTime}.
*
* This returns a {@code LocalDateTime} formed from this date at the
* specified hour and minute.
* The seconds and nanosecond fields will be set to zero.
* The individual time fields must be within their valid range.
* All possible combinations of date and time are valid.
*
* @param hour the hour-of-day to use, from 0 to 23
* @param minute the minute-of-hour to use, from 0 to 59
* @return the local date-time formed from this date and the specified time, not null
* @throws DateTimeException if the value of any field is out of range
*/
public LocalDateTime atTime(int hour, int minute) {
return atTime(LocalTime.of(hour, minute));
}
/**
* Combines this date with a time to create a {@code LocalDateTime}.
*
* This returns a {@code LocalDateTime} formed from this date at the
* specified hour, minute and second.
* The nanosecond field will be set to zero.
* The individual time fields must be within their valid range.
* All possible combinations of date and time are valid.
*
* @param hour the hour-of-day to use, from 0 to 23
* @param minute the minute-of-hour to use, from 0 to 59
* @param second the second-of-minute to represent, from 0 to 59
* @return the local date-time formed from this date and the specified time, not null
* @throws DateTimeException if the value of any field is out of range
*/
public LocalDateTime atTime(int hour, int minute, int second) {
return atTime(LocalTime.of(hour, minute, second));
}
/**
* Combines this date with a time to create a {@code LocalDateTime}.
*
* This returns a {@code LocalDateTime} formed from this date at the
* specified hour, minute, second and nanosecond.
* The individual time fields must be within their valid range.
* All possible combinations of date and time are valid.
*
* @param hour the hour-of-day to use, from 0 to 23
* @param minute the minute-of-hour to use, from 0 to 59
* @param second the second-of-minute to represent, from 0 to 59
* @param nanoOfSecond the nano-of-second to represent, from 0 to 999,999,999
* @return the local date-time formed from this date and the specified time, not null
* @throws DateTimeException if the value of any field is out of range
*/
public LocalDateTime atTime(int hour, int minute, int second, int nanoOfSecond) {
return atTime(LocalTime.of(hour, minute, second, nanoOfSecond));
}
/**
* Combines this date with an offset time to create an {@code OffsetDateTime}.
*
* This returns an {@code OffsetDateTime} formed from this date at the specified time.
* All possible combinations of date and time are valid.
*
* @param time the time to combine with, not null
* @return the offset date-time formed from this date and the specified time, not null
*/
public OffsetDateTime atTime(OffsetTime time) {
return OffsetDateTime.of(LocalDateTime.of(this, time.toLocalTime()), time.getOffset());
}
/**
* Combines this date with the time of midnight to create a {@code LocalDateTime}
* at the start of this date.
*
* This returns a {@code LocalDateTime} formed from this date at the time of
* midnight, 00:00, at the start of this date.
*
* @return the local date-time of midnight at the start of this date, not null
*/
public LocalDateTime atStartOfDay() {
return LocalDateTime.of(this, LocalTime.MIDNIGHT);
}
/**
* Returns a zoned date-time from this date at the earliest valid time according
* to the rules in the time-zone.
*
* Time-zone rules, such as daylight savings, mean that not every local date-time
* is valid for the specified zone, thus the local date-time may not be midnight.
*
* In most cases, there is only one valid offset for a local date-time.
* In the case of an overlap, there are two valid offsets, and the earlier one is used,
* corresponding to the first occurrence of midnight on the date.
* In the case of a gap, the zoned date-time will represent the instant just after the gap.
*
* If the zone ID is a {@link ZoneOffset}, then the result always has a time of midnight.
*
* To convert to a specific time in a given time-zone call {@link #atTime(LocalTime)}
* followed by {@link LocalDateTime#atZone(ZoneId)}.
*
* @param zone the zone ID to use, not null
* @return the zoned date-time formed from this date and the earliest valid time for the zone, not null
*/
public ZonedDateTime atStartOfDay(ZoneId zone) {
Objects.requireNonNull(zone, "zone");
// need to handle case where there is a gap from 11:30 to 00:30
// standard ZDT factory would result in 01:00 rather than 00:30
LocalDateTime ldt = atTime(LocalTime.MIDNIGHT);
if (zone instanceof ZoneOffset == false) {
ZoneRules rules = zone.getRules();
ZoneOffsetTransition trans = rules.getTransition(ldt);
if (trans != null && trans.isGap()) {
ldt = trans.getDateTimeAfter();
}
}
return ZonedDateTime.of(ldt, zone);
}
//-----------------------------------------------------------------------
@Override
public long toEpochDay() {
long y = year;
long m = month;
long total = 0;
total += 365 * y;
if (y >= 0) {
total += (y + 3) / 4 - (y + 99) / 100 + (y + 399) / 400;
} else {
total -= y / -4 - y / -100 + y / -400;
}
total += ((367 * m - 362) / 12);
total += day - 1;
if (m > 2) {
total--;
if (isLeapYear() == false) {
total--;
}
}
return total - DAYS_0000_TO_1970;
}
//-----------------------------------------------------------------------
/**
* Compares this date to another date.
*
* The comparison is primarily based on the date, from earliest to latest.
* It is "consistent with equals", as defined by {@link Comparable}.
*
* If all the dates being compared are instances of {@code LocalDate},
* then the comparison will be entirely based on the date.
* If some dates being compared are in different chronologies, then the
* chronology is also considered, see {@link java.time.chrono.ChronoLocalDate#compareTo}.
*
* @param other the other date to compare to, not null
* @return the comparator value, negative if less, positive if greater
*/
@Override // override for Javadoc and performance
public int compareTo(ChronoLocalDate other) {
if (other instanceof LocalDate) {
return compareTo0((LocalDate) other);
}
return ChronoLocalDate.super.compareTo(other);
}
int compareTo0(LocalDate otherDate) {
int cmp = (year - otherDate.year);
if (cmp == 0) {
cmp = (month - otherDate.month);
if (cmp == 0) {
cmp = (day - otherDate.day);
}
}
return cmp;
}
/**
* Checks if this date is after the specified date.
*
* This checks to see if this date represents a point on the
* local time-line after the other date.
*
* This method only considers the position of the two dates on the local time-line.
* It does not take into account the chronology, or calendar system.
* This is different from the comparison in {@link #compareTo(ChronoLocalDate)},
* but is the same approach as {@link ChronoLocalDate#timeLineOrder()}.
*
* @param other the other date to compare to, not null
* @return true if this date is after the specified date
*/
@Override // override for Javadoc and performance
public boolean isAfter(ChronoLocalDate other) {
if (other instanceof LocalDate) {
return compareTo0((LocalDate) other) > 0;
}
return ChronoLocalDate.super.isAfter(other);
}
/**
* Checks if this date is before the specified date.
*
* This checks to see if this date represents a point on the
* local time-line before the other date.
*
* This method only considers the position of the two dates on the local time-line.
* It does not take into account the chronology, or calendar system.
* This is different from the comparison in {@link #compareTo(ChronoLocalDate)},
* but is the same approach as {@link ChronoLocalDate#timeLineOrder()}.
*
* @param other the other date to compare to, not null
* @return true if this date is before the specified date
*/
@Override // override for Javadoc and performance
public boolean isBefore(ChronoLocalDate other) {
if (other instanceof LocalDate) {
return compareTo0((LocalDate) other) < 0;
}
return ChronoLocalDate.super.isBefore(other);
}
/**
* Checks if this date is equal to the specified date.
*
* This checks to see if this date represents the same point on the
* local time-line as the other date.
*
* This method only considers the position of the two dates on the local time-line.
* It does not take into account the chronology, or calendar system.
* This is different from the comparison in {@link #compareTo(ChronoLocalDate)}
* but is the same approach as {@link ChronoLocalDate#timeLineOrder()}.
*
* @param other the other date to compare to, not null
* @return true if this date is equal to the specified date
*/
@Override // override for Javadoc and performance
public boolean isEqual(ChronoLocalDate other) {
if (other instanceof LocalDate) {
return compareTo0((LocalDate) other) == 0;
}
return ChronoLocalDate.super.isEqual(other);
}
//-----------------------------------------------------------------------
/**
* Checks if this date is equal to another date.
*
* Compares this {@code LocalDate} with another ensuring that the date is the same.
*
* Only objects of type {@code LocalDate} are compared, other types return false.
* To compare the dates of two {@code TemporalAccessor} instances, including dates
* in two different chronologies, use {@link ChronoField#EPOCH_DAY} as a comparator.
*
* @param obj the object to check, null returns false
* @return true if this is equal to the other date
*/
@Override
public boolean equals(Object obj) {
if (this == obj) {
return true;
}
if (obj instanceof LocalDate) {
return compareTo0((LocalDate) obj) == 0;
}
return false;
}
/**
* A hash code for this date.
*
* @return a suitable hash code
*/
@Override
public int hashCode() {
int yearValue = year;
int monthValue = month;
int dayValue = day;
return (yearValue & 0xFFFFF800) ^ ((yearValue << 11) + (monthValue << 6) + (dayValue));
}
//-----------------------------------------------------------------------
/**
* Outputs this date as a {@code String}, such as {@code 2007-12-03}.
*
* The output will be in the ISO-8601 format {@code uuuu-MM-dd}.
*
* @return a string representation of this date, not null
*/
@Override
public String toString() {
int yearValue = year;
int monthValue = month;
int dayValue = day;
int absYear = Math.abs(yearValue);
StringBuilder buf = new StringBuilder(10);
if (absYear < 1000) {
if (yearValue < 0) {
buf.append(yearValue - 10000).deleteCharAt(1);
} else {
buf.append(yearValue + 10000).deleteCharAt(0);
}
} else {
if (yearValue > 9999) {
buf.append('+');
}
buf.append(yearValue);
}
return buf.append(monthValue < 10 ? "-0" : "-")
.append(monthValue)
.append(dayValue < 10 ? "-0" : "-")
.append(dayValue)
.toString();
}
//-----------------------------------------------------------------------
/**
* Writes the object using a
* dedicated serialized form.
* @serialData
*
* // these two lines are equivalent, but the second approach is recommended
* temporal = thisLocalDate.adjustInto(temporal);
* temporal = temporal.with(thisLocalDate);
*
*
* // these two lines are equivalent
* amount = start.until(end, MONTHS);
* amount = MONTHS.between(start, end);
*
* The choice should be made based on which makes the code more readable.
*
* // these two lines are equivalent
* period = start.until(end);
* period = Period.between(start, end);
*
* The choice should be made based on which makes the code more readable.
*
* @param endDateExclusive the end date, exclusive, which may be in any chronology, not null
* @return the period between this date and the end date, not null
*/
@Override
public Period until(ChronoLocalDate endDateExclusive) {
LocalDate end = LocalDate.from(endDateExclusive);
long totalMonths = end.getProlepticMonth() - this.getProlepticMonth(); // safe
int days = end.day - this.day;
if (totalMonths > 0 && days < 0) {
totalMonths--;
LocalDate calcDate = this.plusMonths(totalMonths);
days = (int) (end.toEpochDay() - calcDate.toEpochDay()); // safe
} else if (totalMonths < 0 && days > 0) {
totalMonths++;
days -= end.lengthOfMonth();
}
long years = totalMonths / 12; // safe
int months = (int) (totalMonths % 12); // safe
return Period.of(Math.toIntExact(years), months, days);
}
/**
* Formats this date using the specified formatter.
*
* LocalDate a = LocalDate.of(2012, 6, 30);
* LocalDate b = LocalDate.of(2012, 7, 1);
* a.isAfter(b) == false
* a.isAfter(a) == false
* b.isAfter(a) == true
*
*
* LocalDate a = LocalDate.of(2012, 6, 30);
* LocalDate b = LocalDate.of(2012, 7, 1);
* a.isBefore(b) == true
* a.isBefore(a) == false
* b.isBefore(a) == false
*
*
* LocalDate a = LocalDate.of(2012, 6, 30);
* LocalDate b = LocalDate.of(2012, 7, 1);
* a.isEqual(b) == false
* a.isEqual(a) == true
* b.isEqual(a) == false
*
*
* out.writeByte(3); // identifies a LocalDate
* out.writeInt(year);
* out.writeByte(month);
* out.writeByte(day);
*
*
* @return the instance of {@code Ser}, not null
*/
private Object writeReplace() {
return new Ser(Ser.LOCAL_DATE_TYPE, this);
}
/**
* Defend against malicious streams.
*
* @param s the stream to read
* @throws InvalidObjectException always
*/
private void readObject(ObjectInputStream s) throws InvalidObjectException {
throw new InvalidObjectException("Deserialization via serialization delegate");
}
void writeExternal(DataOutput out) throws IOException {
out.writeInt(year);
out.writeByte(month);
out.writeByte(day);
}
static LocalDate readExternal(DataInput in) throws IOException {
int year = in.readInt();
int month = in.readByte();
int dayOfMonth = in.readByte();
return LocalDate.of(year, month, dayOfMonth);
}
}