/* * Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. Oracle designates this * particular file as subject to the "Classpath" exception as provided * by Oracle in the LICENSE file that accompanied this code. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. */ /* * This file is available under and governed by the GNU General Public * License version 2 only, as published by the Free Software Foundation. * However, the following notice accompanied the original version of this * file: * * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * * Neither the name of JSR-310 nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ package java.time; import static java.time.LocalTime.NANOS_PER_HOUR; import static java.time.LocalTime.NANOS_PER_MINUTE; import static java.time.LocalTime.NANOS_PER_SECOND; import static java.time.LocalTime.SECONDS_PER_DAY; import static java.time.temporal.ChronoField.NANO_OF_DAY; import static java.time.temporal.ChronoField.OFFSET_SECONDS; import static java.time.temporal.ChronoUnit.NANOS; import java.io.IOException; import java.io.ObjectInput; import java.io.ObjectOutput; import java.io.InvalidObjectException; import java.io.ObjectInputStream; import java.io.Serializable; import java.time.format.DateTimeFormatter; import java.time.format.DateTimeParseException; import java.time.temporal.ChronoField; import java.time.temporal.ChronoUnit; import java.time.temporal.Temporal; import java.time.temporal.TemporalAccessor; import java.time.temporal.TemporalAdjuster; import java.time.temporal.TemporalAmount; import java.time.temporal.TemporalField; import java.time.temporal.TemporalQueries; import java.time.temporal.TemporalQuery; import java.time.temporal.TemporalUnit; import java.time.temporal.UnsupportedTemporalTypeException; import java.time.temporal.ValueRange; import java.time.zone.ZoneRules; import java.util.Objects; // Android-changed: removed ValueBased paragraph. /** * A time with an offset from UTC/Greenwich in the ISO-8601 calendar system, * such as {@code 10:15:30+01:00}. *

* {@code OffsetTime} is an immutable date-time object that represents a time, often * viewed as hour-minute-second-offset. * This class stores all time fields, to a precision of nanoseconds, * as well as a zone offset. * For example, the value "13:45.30.123456789+02:00" can be stored * in an {@code OffsetTime}. * * @implSpec * This class is immutable and thread-safe. * * @since 1.8 */ public final class OffsetTime implements Temporal, TemporalAdjuster, Comparable, Serializable { /** * The minimum supported {@code OffsetTime}, '00:00:00+18:00'. * This is the time of midnight at the start of the day in the maximum offset * (larger offsets are earlier on the time-line). * This combines {@link LocalTime#MIN} and {@link ZoneOffset#MAX}. * This could be used by an application as a "far past" date. */ public static final OffsetTime MIN = LocalTime.MIN.atOffset(ZoneOffset.MAX); /** * The maximum supported {@code OffsetTime}, '23:59:59.999999999-18:00'. * This is the time just before midnight at the end of the day in the minimum offset * (larger negative offsets are later on the time-line). * This combines {@link LocalTime#MAX} and {@link ZoneOffset#MIN}. * This could be used by an application as a "far future" date. */ public static final OffsetTime MAX = LocalTime.MAX.atOffset(ZoneOffset.MIN); /** * Serialization version. */ private static final long serialVersionUID = 7264499704384272492L; /** * The local date-time. */ private final LocalTime time; /** * The offset from UTC/Greenwich. */ private final ZoneOffset offset; //----------------------------------------------------------------------- /** * Obtains the current time from the system clock in the default time-zone. *

* This will query the {@link Clock#systemDefaultZone() system clock} in the default * time-zone to obtain the current time. * The offset will be calculated from the time-zone in the clock. *

* Using this method will prevent the ability to use an alternate clock for testing * because the clock is hard-coded. * * @return the current time using the system clock and default time-zone, not null */ public static OffsetTime now() { return now(Clock.systemDefaultZone()); } /** * Obtains the current time from the system clock in the specified time-zone. *

* This will query the {@link Clock#system(ZoneId) system clock} to obtain the current time. * Specifying the time-zone avoids dependence on the default time-zone. * The offset will be calculated from the specified time-zone. *

* Using this method will prevent the ability to use an alternate clock for testing * because the clock is hard-coded. * * @param zone the zone ID to use, not null * @return the current time using the system clock, not null */ public static OffsetTime now(ZoneId zone) { return now(Clock.system(zone)); } /** * Obtains the current time from the specified clock. *

* This will query the specified clock to obtain the current time. * The offset will be calculated from the time-zone in the clock. *

* Using this method allows the use of an alternate clock for testing. * The alternate clock may be introduced using {@link Clock dependency injection}. * * @param clock the clock to use, not null * @return the current time, not null */ public static OffsetTime now(Clock clock) { Objects.requireNonNull(clock, "clock"); final Instant now = clock.instant(); // called once return ofInstant(now, clock.getZone().getRules().getOffset(now)); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code OffsetTime} from a local time and an offset. * * @param time the local time, not null * @param offset the zone offset, not null * @return the offset time, not null */ public static OffsetTime of(LocalTime time, ZoneOffset offset) { return new OffsetTime(time, offset); } /** * Obtains an instance of {@code OffsetTime} from an hour, minute, second and nanosecond. *

* This creates an offset time with the four specified fields. *

* This method exists primarily for writing test cases. * Non test-code will typically use other methods to create an offset time. * {@code LocalTime} has two additional convenience variants of the * equivalent factory method taking fewer arguments. * They are not provided here to reduce the footprint of the API. * * @param hour the hour-of-day to represent, from 0 to 23 * @param minute the minute-of-hour to represent, from 0 to 59 * @param second the second-of-minute to represent, from 0 to 59 * @param nanoOfSecond the nano-of-second to represent, from 0 to 999,999,999 * @param offset the zone offset, not null * @return the offset time, not null * @throws DateTimeException if the value of any field is out of range */ public static OffsetTime of(int hour, int minute, int second, int nanoOfSecond, ZoneOffset offset) { return new OffsetTime(LocalTime.of(hour, minute, second, nanoOfSecond), offset); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code OffsetTime} from an {@code Instant} and zone ID. *

* This creates an offset time with the same instant as that specified. * Finding the offset from UTC/Greenwich is simple as there is only one valid * offset for each instant. *

* The date component of the instant is dropped during the conversion. * This means that the conversion can never fail due to the instant being * out of the valid range of dates. * * @param instant the instant to create the time from, not null * @param zone the time-zone, which may be an offset, not null * @return the offset time, not null */ public static OffsetTime ofInstant(Instant instant, ZoneId zone) { Objects.requireNonNull(instant, "instant"); Objects.requireNonNull(zone, "zone"); ZoneRules rules = zone.getRules(); ZoneOffset offset = rules.getOffset(instant); long localSecond = instant.getEpochSecond() + offset.getTotalSeconds(); // overflow caught later int secsOfDay = (int) Math.floorMod(localSecond, SECONDS_PER_DAY); LocalTime time = LocalTime.ofNanoOfDay(secsOfDay * NANOS_PER_SECOND + instant.getNano()); return new OffsetTime(time, offset); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code OffsetTime} from a temporal object. *

* This obtains an offset time based on the specified temporal. * A {@code TemporalAccessor} represents an arbitrary set of date and time information, * which this factory converts to an instance of {@code OffsetTime}. *

* The conversion extracts and combines the {@code ZoneOffset} and the * {@code LocalTime} from the temporal object. * Implementations are permitted to perform optimizations such as accessing * those fields that are equivalent to the relevant objects. *

* This method matches the signature of the functional interface {@link TemporalQuery} * allowing it to be used as a query via method reference, {@code OffsetTime::from}. * * @param temporal the temporal object to convert, not null * @return the offset time, not null * @throws DateTimeException if unable to convert to an {@code OffsetTime} */ public static OffsetTime from(TemporalAccessor temporal) { if (temporal instanceof OffsetTime) { return (OffsetTime) temporal; } try { LocalTime time = LocalTime.from(temporal); ZoneOffset offset = ZoneOffset.from(temporal); return new OffsetTime(time, offset); } catch (DateTimeException ex) { throw new DateTimeException("Unable to obtain OffsetTime from TemporalAccessor: " + temporal + " of type " + temporal.getClass().getName(), ex); } } //----------------------------------------------------------------------- /** * Obtains an instance of {@code OffsetTime} from a text string such as {@code 10:15:30+01:00}. *

* The string must represent a valid time and is parsed using * {@link java.time.format.DateTimeFormatter#ISO_OFFSET_TIME}. * * @param text the text to parse such as "10:15:30+01:00", not null * @return the parsed local time, not null * @throws DateTimeParseException if the text cannot be parsed */ public static OffsetTime parse(CharSequence text) { return parse(text, DateTimeFormatter.ISO_OFFSET_TIME); } /** * Obtains an instance of {@code OffsetTime} from a text string using a specific formatter. *

* The text is parsed using the formatter, returning a time. * * @param text the text to parse, not null * @param formatter the formatter to use, not null * @return the parsed offset time, not null * @throws DateTimeParseException if the text cannot be parsed */ public static OffsetTime parse(CharSequence text, DateTimeFormatter formatter) { Objects.requireNonNull(formatter, "formatter"); return formatter.parse(text, OffsetTime::from); } //----------------------------------------------------------------------- /** * Constructor. * * @param time the local time, not null * @param offset the zone offset, not null */ private OffsetTime(LocalTime time, ZoneOffset offset) { this.time = Objects.requireNonNull(time, "time"); this.offset = Objects.requireNonNull(offset, "offset"); } /** * Returns a new time based on this one, returning {@code this} where possible. * * @param time the time to create with, not null * @param offset the zone offset to create with, not null */ private OffsetTime with(LocalTime time, ZoneOffset offset) { if (this.time == time && this.offset.equals(offset)) { return this; } return new OffsetTime(time, offset); } //----------------------------------------------------------------------- /** * Checks if the specified field is supported. *

* This checks if this time can be queried for the specified field. * If false, then calling the {@link #range(TemporalField) range}, * {@link #get(TemporalField) get} and {@link #with(TemporalField, long)} * methods will throw an exception. *

* If the field is a {@link ChronoField} then the query is implemented here. * The supported fields are: *

* All other {@code ChronoField} instances will return false. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)} * passing {@code this} as the argument. * Whether the field is supported is determined by the field. * * @param field the field to check, null returns false * @return true if the field is supported on this time, false if not */ @Override public boolean isSupported(TemporalField field) { if (field instanceof ChronoField) { return field.isTimeBased() || field == OFFSET_SECONDS; } return field != null && field.isSupportedBy(this); } /** * Checks if the specified unit is supported. *

* This checks if the specified unit can be added to, or subtracted from, this offset-time. * If false, then calling the {@link #plus(long, TemporalUnit)} and * {@link #minus(long, TemporalUnit) minus} methods will throw an exception. *

* If the unit is a {@link ChronoUnit} then the query is implemented here. * The supported units are: *

* All other {@code ChronoUnit} instances will return false. *

* If the unit is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)} * passing {@code this} as the argument. * Whether the unit is supported is determined by the unit. * * @param unit the unit to check, null returns false * @return true if the unit can be added/subtracted, false if not */ @Override // override for Javadoc public boolean isSupported(TemporalUnit unit) { if (unit instanceof ChronoUnit) { return unit.isTimeBased(); } return unit != null && unit.isSupportedBy(this); } //----------------------------------------------------------------------- /** * Gets the range of valid values for the specified field. *

* The range object expresses the minimum and maximum valid values for a field. * This time is used to enhance the accuracy of the returned range. * If it is not possible to return the range, because the field is not supported * or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return * appropriate range instances. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)} * passing {@code this} as the argument. * Whether the range can be obtained is determined by the field. * * @param field the field to query the range for, not null * @return the range of valid values for the field, not null * @throws DateTimeException if the range for the field cannot be obtained * @throws UnsupportedTemporalTypeException if the field is not supported */ @Override public ValueRange range(TemporalField field) { if (field instanceof ChronoField) { if (field == OFFSET_SECONDS) { return field.range(); } return time.range(field); } return field.rangeRefinedBy(this); } /** * Gets the value of the specified field from this time as an {@code int}. *

* This queries this time for the value of the specified field. * The returned value will always be within the valid range of values for the field. * If it is not possible to return the value, because the field is not supported * or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return valid * values based on this time, except {@code NANO_OF_DAY} and {@code MICRO_OF_DAY} * which are too large to fit in an {@code int} and throw a {@code DateTimeException}. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} * passing {@code this} as the argument. Whether the value can be obtained, * and what the value represents, is determined by the field. * * @param field the field to get, not null * @return the value for the field * @throws DateTimeException if a value for the field cannot be obtained or * the value is outside the range of valid values for the field * @throws UnsupportedTemporalTypeException if the field is not supported or * the range of values exceeds an {@code int} * @throws ArithmeticException if numeric overflow occurs */ @Override // override for Javadoc public int get(TemporalField field) { return Temporal.super.get(field); } /** * Gets the value of the specified field from this time as a {@code long}. *

* This queries this time for the value of the specified field. * If it is not possible to return the value, because the field is not supported * or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return valid * values based on this time. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} * passing {@code this} as the argument. Whether the value can be obtained, * and what the value represents, is determined by the field. * * @param field the field to get, not null * @return the value for the field * @throws DateTimeException if a value for the field cannot be obtained * @throws UnsupportedTemporalTypeException if the field is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public long getLong(TemporalField field) { if (field instanceof ChronoField) { if (field == OFFSET_SECONDS) { return offset.getTotalSeconds(); } return time.getLong(field); } return field.getFrom(this); } //----------------------------------------------------------------------- /** * Gets the zone offset, such as '+01:00'. *

* This is the offset of the local time from UTC/Greenwich. * * @return the zone offset, not null */ public ZoneOffset getOffset() { return offset; } /** * Returns a copy of this {@code OffsetTime} with the specified offset ensuring * that the result has the same local time. *

* This method returns an object with the same {@code LocalTime} and the specified {@code ZoneOffset}. * No calculation is needed or performed. * For example, if this time represents {@code 10:30+02:00} and the offset specified is * {@code +03:00}, then this method will return {@code 10:30+03:00}. *

* To take into account the difference between the offsets, and adjust the time fields, * use {@link #withOffsetSameInstant}. *

* This instance is immutable and unaffected by this method call. * * @param offset the zone offset to change to, not null * @return an {@code OffsetTime} based on this time with the requested offset, not null */ public OffsetTime withOffsetSameLocal(ZoneOffset offset) { return offset != null && offset.equals(this.offset) ? this : new OffsetTime(time, offset); } /** * Returns a copy of this {@code OffsetTime} with the specified offset ensuring * that the result is at the same instant on an implied day. *

* This method returns an object with the specified {@code ZoneOffset} and a {@code LocalTime} * adjusted by the difference between the two offsets. * This will result in the old and new objects representing the same instant on an implied day. * This is useful for finding the local time in a different offset. * For example, if this time represents {@code 10:30+02:00} and the offset specified is * {@code +03:00}, then this method will return {@code 11:30+03:00}. *

* To change the offset without adjusting the local time use {@link #withOffsetSameLocal}. *

* This instance is immutable and unaffected by this method call. * * @param offset the zone offset to change to, not null * @return an {@code OffsetTime} based on this time with the requested offset, not null */ public OffsetTime withOffsetSameInstant(ZoneOffset offset) { if (offset.equals(this.offset)) { return this; } int difference = offset.getTotalSeconds() - this.offset.getTotalSeconds(); LocalTime adjusted = time.plusSeconds(difference); return new OffsetTime(adjusted, offset); } //----------------------------------------------------------------------- /** * Gets the {@code LocalTime} part of this date-time. *

* This returns a {@code LocalTime} with the same hour, minute, second and * nanosecond as this date-time. * * @return the time part of this date-time, not null */ public LocalTime toLocalTime() { return time; } //----------------------------------------------------------------------- /** * Gets the hour-of-day field. * * @return the hour-of-day, from 0 to 23 */ public int getHour() { return time.getHour(); } /** * Gets the minute-of-hour field. * * @return the minute-of-hour, from 0 to 59 */ public int getMinute() { return time.getMinute(); } /** * Gets the second-of-minute field. * * @return the second-of-minute, from 0 to 59 */ public int getSecond() { return time.getSecond(); } /** * Gets the nano-of-second field. * * @return the nano-of-second, from 0 to 999,999,999 */ public int getNano() { return time.getNano(); } //----------------------------------------------------------------------- /** * Returns an adjusted copy of this time. *

* This returns an {@code OffsetTime}, based on this one, with the time adjusted. * The adjustment takes place using the specified adjuster strategy object. * Read the documentation of the adjuster to understand what adjustment will be made. *

* A simple adjuster might simply set the one of the fields, such as the hour field. * A more complex adjuster might set the time to the last hour of the day. *

* The classes {@link LocalTime} and {@link ZoneOffset} implement {@code TemporalAdjuster}, * thus this method can be used to change the time or offset: *

     *  result = offsetTime.with(time);
     *  result = offsetTime.with(offset);
     * 
*

* The result of this method is obtained by invoking the * {@link TemporalAdjuster#adjustInto(Temporal)} method on the * specified adjuster passing {@code this} as the argument. *

* This instance is immutable and unaffected by this method call. * * @param adjuster the adjuster to use, not null * @return an {@code OffsetTime} based on {@code this} with the adjustment made, not null * @throws DateTimeException if the adjustment cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public OffsetTime with(TemporalAdjuster adjuster) { // optimizations if (adjuster instanceof LocalTime) { return with((LocalTime) adjuster, offset); } else if (adjuster instanceof ZoneOffset) { return with(time, (ZoneOffset) adjuster); } else if (adjuster instanceof OffsetTime) { return (OffsetTime) adjuster; } return (OffsetTime) adjuster.adjustInto(this); } /** * Returns a copy of this time with the specified field set to a new value. *

* This returns an {@code OffsetTime}, based on this one, with the value * for the specified field changed. * This can be used to change any supported field, such as the hour, minute or second. * If it is not possible to set the value, because the field is not supported or for * some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the adjustment is implemented here. *

* The {@code OFFSET_SECONDS} field will return a time with the specified offset. * The local time is unaltered. If the new offset value is outside the valid range * then a {@code DateTimeException} will be thrown. *

* The other {@link #isSupported(TemporalField) supported fields} will behave as per * the matching method on {@link LocalTime#with(TemporalField, long)} LocalTime}. * In this case, the offset is not part of the calculation and will be unchanged. *

* All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)} * passing {@code this} as the argument. In this case, the field determines * whether and how to adjust the instant. *

* This instance is immutable and unaffected by this method call. * * @param field the field to set in the result, not null * @param newValue the new value of the field in the result * @return an {@code OffsetTime} based on {@code this} with the specified field set, not null * @throws DateTimeException if the field cannot be set * @throws UnsupportedTemporalTypeException if the field is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public OffsetTime with(TemporalField field, long newValue) { if (field instanceof ChronoField) { if (field == OFFSET_SECONDS) { ChronoField f = (ChronoField) field; return with(time, ZoneOffset.ofTotalSeconds(f.checkValidIntValue(newValue))); } return with(time.with(field, newValue), offset); } return field.adjustInto(this, newValue); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code OffsetTime} with the hour-of-day altered. *

* The offset does not affect the calculation and will be the same in the result. *

* This instance is immutable and unaffected by this method call. * * @param hour the hour-of-day to set in the result, from 0 to 23 * @return an {@code OffsetTime} based on this time with the requested hour, not null * @throws DateTimeException if the hour value is invalid */ public OffsetTime withHour(int hour) { return with(time.withHour(hour), offset); } /** * Returns a copy of this {@code OffsetTime} with the minute-of-hour altered. *

* The offset does not affect the calculation and will be the same in the result. *

* This instance is immutable and unaffected by this method call. * * @param minute the minute-of-hour to set in the result, from 0 to 59 * @return an {@code OffsetTime} based on this time with the requested minute, not null * @throws DateTimeException if the minute value is invalid */ public OffsetTime withMinute(int minute) { return with(time.withMinute(minute), offset); } /** * Returns a copy of this {@code OffsetTime} with the second-of-minute altered. *

* The offset does not affect the calculation and will be the same in the result. *

* This instance is immutable and unaffected by this method call. * * @param second the second-of-minute to set in the result, from 0 to 59 * @return an {@code OffsetTime} based on this time with the requested second, not null * @throws DateTimeException if the second value is invalid */ public OffsetTime withSecond(int second) { return with(time.withSecond(second), offset); } /** * Returns a copy of this {@code OffsetTime} with the nano-of-second altered. *

* The offset does not affect the calculation and will be the same in the result. *

* This instance is immutable and unaffected by this method call. * * @param nanoOfSecond the nano-of-second to set in the result, from 0 to 999,999,999 * @return an {@code OffsetTime} based on this time with the requested nanosecond, not null * @throws DateTimeException if the nanos value is invalid */ public OffsetTime withNano(int nanoOfSecond) { return with(time.withNano(nanoOfSecond), offset); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code OffsetTime} with the time truncated. *

* Truncation returns a copy of the original time with fields * smaller than the specified unit set to zero. * For example, truncating with the {@link ChronoUnit#MINUTES minutes} unit * will set the second-of-minute and nano-of-second field to zero. *

* The unit must have a {@linkplain TemporalUnit#getDuration() duration} * that divides into the length of a standard day without remainder. * This includes all supplied time units on {@link ChronoUnit} and * {@link ChronoUnit#DAYS DAYS}. Other units throw an exception. *

* The offset does not affect the calculation and will be the same in the result. *

* This instance is immutable and unaffected by this method call. * * @param unit the unit to truncate to, not null * @return an {@code OffsetTime} based on this time with the time truncated, not null * @throws DateTimeException if unable to truncate * @throws UnsupportedTemporalTypeException if the unit is not supported */ public OffsetTime truncatedTo(TemporalUnit unit) { return with(time.truncatedTo(unit), offset); } //----------------------------------------------------------------------- /** * Returns a copy of this time with the specified amount added. *

* This returns an {@code OffsetTime}, based on this one, with the specified amount added. * The amount is typically {@link Duration} but may be any other type implementing * the {@link TemporalAmount} interface. *

* The calculation is delegated to the amount object by calling * {@link TemporalAmount#addTo(Temporal)}. The amount implementation is free * to implement the addition in any way it wishes, however it typically * calls back to {@link #plus(long, TemporalUnit)}. Consult the documentation * of the amount implementation to determine if it can be successfully added. *

* This instance is immutable and unaffected by this method call. * * @param amountToAdd the amount to add, not null * @return an {@code OffsetTime} based on this time with the addition made, not null * @throws DateTimeException if the addition cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public OffsetTime plus(TemporalAmount amountToAdd) { return (OffsetTime) amountToAdd.addTo(this); } /** * Returns a copy of this time with the specified amount added. *

* This returns an {@code OffsetTime}, based on this one, with the amount * in terms of the unit added. If it is not possible to add the amount, because the * unit is not supported or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoUnit} then the addition is implemented by * {@link LocalTime#plus(long, TemporalUnit)}. * The offset is not part of the calculation and will be unchanged in the result. *

* If the field is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)} * passing {@code this} as the argument. In this case, the unit determines * whether and how to perform the addition. *

* This instance is immutable and unaffected by this method call. * * @param amountToAdd the amount of the unit to add to the result, may be negative * @param unit the unit of the amount to add, not null * @return an {@code OffsetTime} based on this time with the specified amount added, not null * @throws DateTimeException if the addition cannot be made * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public OffsetTime plus(long amountToAdd, TemporalUnit unit) { if (unit instanceof ChronoUnit) { return with(time.plus(amountToAdd, unit), offset); } return unit.addTo(this, amountToAdd); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code OffsetTime} with the specified number of hours added. *

* This adds the specified number of hours to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param hours the hours to add, may be negative * @return an {@code OffsetTime} based on this time with the hours added, not null */ public OffsetTime plusHours(long hours) { return with(time.plusHours(hours), offset); } /** * Returns a copy of this {@code OffsetTime} with the specified number of minutes added. *

* This adds the specified number of minutes to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param minutes the minutes to add, may be negative * @return an {@code OffsetTime} based on this time with the minutes added, not null */ public OffsetTime plusMinutes(long minutes) { return with(time.plusMinutes(minutes), offset); } /** * Returns a copy of this {@code OffsetTime} with the specified number of seconds added. *

* This adds the specified number of seconds to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param seconds the seconds to add, may be negative * @return an {@code OffsetTime} based on this time with the seconds added, not null */ public OffsetTime plusSeconds(long seconds) { return with(time.plusSeconds(seconds), offset); } /** * Returns a copy of this {@code OffsetTime} with the specified number of nanoseconds added. *

* This adds the specified number of nanoseconds to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param nanos the nanos to add, may be negative * @return an {@code OffsetTime} based on this time with the nanoseconds added, not null */ public OffsetTime plusNanos(long nanos) { return with(time.plusNanos(nanos), offset); } //----------------------------------------------------------------------- /** * Returns a copy of this time with the specified amount subtracted. *

* This returns an {@code OffsetTime}, based on this one, with the specified amount subtracted. * The amount is typically {@link Duration} but may be any other type implementing * the {@link TemporalAmount} interface. *

* The calculation is delegated to the amount object by calling * {@link TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free * to implement the subtraction in any way it wishes, however it typically * calls back to {@link #minus(long, TemporalUnit)}. Consult the documentation * of the amount implementation to determine if it can be successfully subtracted. *

* This instance is immutable and unaffected by this method call. * * @param amountToSubtract the amount to subtract, not null * @return an {@code OffsetTime} based on this time with the subtraction made, not null * @throws DateTimeException if the subtraction cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public OffsetTime minus(TemporalAmount amountToSubtract) { return (OffsetTime) amountToSubtract.subtractFrom(this); } /** * Returns a copy of this time with the specified amount subtracted. *

* This returns an {@code OffsetTime}, based on this one, with the amount * in terms of the unit subtracted. If it is not possible to subtract the amount, * because the unit is not supported or for some other reason, an exception is thrown. *

* This method is equivalent to {@link #plus(long, TemporalUnit)} with the amount negated. * See that method for a full description of how addition, and thus subtraction, works. *

* This instance is immutable and unaffected by this method call. * * @param amountToSubtract the amount of the unit to subtract from the result, may be negative * @param unit the unit of the amount to subtract, not null * @return an {@code OffsetTime} based on this time with the specified amount subtracted, not null * @throws DateTimeException if the subtraction cannot be made * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public OffsetTime minus(long amountToSubtract, TemporalUnit unit) { return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit)); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code OffsetTime} with the specified number of hours subtracted. *

* This subtracts the specified number of hours from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param hours the hours to subtract, may be negative * @return an {@code OffsetTime} based on this time with the hours subtracted, not null */ public OffsetTime minusHours(long hours) { return with(time.minusHours(hours), offset); } /** * Returns a copy of this {@code OffsetTime} with the specified number of minutes subtracted. *

* This subtracts the specified number of minutes from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param minutes the minutes to subtract, may be negative * @return an {@code OffsetTime} based on this time with the minutes subtracted, not null */ public OffsetTime minusMinutes(long minutes) { return with(time.minusMinutes(minutes), offset); } /** * Returns a copy of this {@code OffsetTime} with the specified number of seconds subtracted. *

* This subtracts the specified number of seconds from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param seconds the seconds to subtract, may be negative * @return an {@code OffsetTime} based on this time with the seconds subtracted, not null */ public OffsetTime minusSeconds(long seconds) { return with(time.minusSeconds(seconds), offset); } /** * Returns a copy of this {@code OffsetTime} with the specified number of nanoseconds subtracted. *

* This subtracts the specified number of nanoseconds from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param nanos the nanos to subtract, may be negative * @return an {@code OffsetTime} based on this time with the nanoseconds subtracted, not null */ public OffsetTime minusNanos(long nanos) { return with(time.minusNanos(nanos), offset); } //----------------------------------------------------------------------- /** * Queries this time using the specified query. *

* This queries this time using the specified query strategy object. * The {@code TemporalQuery} object defines the logic to be used to * obtain the result. Read the documentation of the query to understand * what the result of this method will be. *

* The result of this method is obtained by invoking the * {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the * specified query passing {@code this} as the argument. * * @param the type of the result * @param query the query to invoke, not null * @return the query result, null may be returned (defined by the query) * @throws DateTimeException if unable to query (defined by the query) * @throws ArithmeticException if numeric overflow occurs (defined by the query) */ @SuppressWarnings("unchecked") @Override public R query(TemporalQuery query) { if (query == TemporalQueries.offset() || query == TemporalQueries.zone()) { return (R) offset; } else if (query == TemporalQueries.zoneId() | query == TemporalQueries.chronology() || query == TemporalQueries.localDate()) { return null; } else if (query == TemporalQueries.localTime()) { return (R) time; } else if (query == TemporalQueries.precision()) { return (R) NANOS; } // inline TemporalAccessor.super.query(query) as an optimization // non-JDK classes are not permitted to make this optimization return query.queryFrom(this); } /** * Adjusts the specified temporal object to have the same offset and time * as this object. *

* This returns a temporal object of the same observable type as the input * with the offset and time changed to be the same as this. *

* The adjustment is equivalent to using {@link Temporal#with(TemporalField, long)} * twice, passing {@link ChronoField#NANO_OF_DAY} and * {@link ChronoField#OFFSET_SECONDS} as the fields. *

* In most cases, it is clearer to reverse the calling pattern by using * {@link Temporal#with(TemporalAdjuster)}: *

     *   // these two lines are equivalent, but the second approach is recommended
     *   temporal = thisOffsetTime.adjustInto(temporal);
     *   temporal = temporal.with(thisOffsetTime);
     * 
*

* This instance is immutable and unaffected by this method call. * * @param temporal the target object to be adjusted, not null * @return the adjusted object, not null * @throws DateTimeException if unable to make the adjustment * @throws ArithmeticException if numeric overflow occurs */ @Override public Temporal adjustInto(Temporal temporal) { return temporal .with(NANO_OF_DAY, time.toNanoOfDay()) .with(OFFSET_SECONDS, offset.getTotalSeconds()); } /** * Calculates the amount of time until another time in terms of the specified unit. *

* This calculates the amount of time between two {@code OffsetTime} * objects in terms of a single {@code TemporalUnit}. * The start and end points are {@code this} and the specified time. * The result will be negative if the end is before the start. * For example, the amount in hours between two times can be calculated * using {@code startTime.until(endTime, HOURS)}. *

* The {@code Temporal} passed to this method is converted to a * {@code OffsetTime} using {@link #from(TemporalAccessor)}. * If the offset differs between the two times, then the specified * end time is normalized to have the same offset as this time. *

* The calculation returns a whole number, representing the number of * complete units between the two times. * For example, the amount in hours between 11:30Z and 13:29Z will only * be one hour as it is one minute short of two hours. *

* There are two equivalent ways of using this method. * The first is to invoke this method. * The second is to use {@link TemporalUnit#between(Temporal, Temporal)}: *

     *   // these two lines are equivalent
     *   amount = start.until(end, MINUTES);
     *   amount = MINUTES.between(start, end);
     * 
* The choice should be made based on which makes the code more readable. *

* The calculation is implemented in this method for {@link ChronoUnit}. * The units {@code NANOS}, {@code MICROS}, {@code MILLIS}, {@code SECONDS}, * {@code MINUTES}, {@code HOURS} and {@code HALF_DAYS} are supported. * Other {@code ChronoUnit} values will throw an exception. *

* If the unit is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)} * passing {@code this} as the first argument and the converted input temporal * as the second argument. *

* This instance is immutable and unaffected by this method call. * * @param endExclusive the end time, exclusive, which is converted to an {@code OffsetTime}, not null * @param unit the unit to measure the amount in, not null * @return the amount of time between this time and the end time * @throws DateTimeException if the amount cannot be calculated, or the end * temporal cannot be converted to an {@code OffsetTime} * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public long until(Temporal endExclusive, TemporalUnit unit) { OffsetTime end = OffsetTime.from(endExclusive); if (unit instanceof ChronoUnit) { long nanosUntil = end.toEpochNano() - toEpochNano(); // no overflow switch ((ChronoUnit) unit) { case NANOS: return nanosUntil; case MICROS: return nanosUntil / 1000; case MILLIS: return nanosUntil / 1000_000; case SECONDS: return nanosUntil / NANOS_PER_SECOND; case MINUTES: return nanosUntil / NANOS_PER_MINUTE; case HOURS: return nanosUntil / NANOS_PER_HOUR; case HALF_DAYS: return nanosUntil / (12 * NANOS_PER_HOUR); } throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit); } return unit.between(this, end); } /** * Formats this time using the specified formatter. *

* This time will be passed to the formatter to produce a string. * * @param formatter the formatter to use, not null * @return the formatted time string, not null * @throws DateTimeException if an error occurs during printing */ public String format(DateTimeFormatter formatter) { Objects.requireNonNull(formatter, "formatter"); return formatter.format(this); } //----------------------------------------------------------------------- /** * Combines this time with a date to create an {@code OffsetDateTime}. *

* This returns an {@code OffsetDateTime} formed from this time and the specified date. * All possible combinations of date and time are valid. * * @param date the date to combine with, not null * @return the offset date-time formed from this time and the specified date, not null */ public OffsetDateTime atDate(LocalDate date) { return OffsetDateTime.of(date, time, offset); } //----------------------------------------------------------------------- /** * Converts this time to epoch nanos based on 1970-01-01Z. * * @return the epoch nanos value */ private long toEpochNano() { long nod = time.toNanoOfDay(); long offsetNanos = offset.getTotalSeconds() * NANOS_PER_SECOND; return nod - offsetNanos; } //----------------------------------------------------------------------- /** * Compares this {@code OffsetTime} to another time. *

* The comparison is based first on the UTC equivalent instant, then on the local time. * It is "consistent with equals", as defined by {@link Comparable}. *

* For example, the following is the comparator order: *

    *
  1. {@code 10:30+01:00}
  2. *
  3. {@code 11:00+01:00}
  4. *
  5. {@code 12:00+02:00}
  6. *
  7. {@code 11:30+01:00}
  8. *
  9. {@code 12:00+01:00}
  10. *
  11. {@code 12:30+01:00}
  12. *
* Values #2 and #3 represent the same instant on the time-line. * When two values represent the same instant, the local time is compared * to distinguish them. This step is needed to make the ordering * consistent with {@code equals()}. *

* To compare the underlying local time of two {@code TemporalAccessor} instances, * use {@link ChronoField#NANO_OF_DAY} as a comparator. * * @param other the other time to compare to, not null * @return the comparator value, negative if less, positive if greater * @throws NullPointerException if {@code other} is null */ @Override public int compareTo(OffsetTime other) { if (offset.equals(other.offset)) { return time.compareTo(other.time); } int compare = Long.compare(toEpochNano(), other.toEpochNano()); if (compare == 0) { compare = time.compareTo(other.time); } return compare; } //----------------------------------------------------------------------- /** * Checks if the instant of this {@code OffsetTime} is after that of the * specified time applying both times to a common date. *

* This method differs from the comparison in {@link #compareTo} in that it * only compares the instant of the time. This is equivalent to converting both * times to an instant using the same date and comparing the instants. * * @param other the other time to compare to, not null * @return true if this is after the instant of the specified time */ public boolean isAfter(OffsetTime other) { return toEpochNano() > other.toEpochNano(); } /** * Checks if the instant of this {@code OffsetTime} is before that of the * specified time applying both times to a common date. *

* This method differs from the comparison in {@link #compareTo} in that it * only compares the instant of the time. This is equivalent to converting both * times to an instant using the same date and comparing the instants. * * @param other the other time to compare to, not null * @return true if this is before the instant of the specified time */ public boolean isBefore(OffsetTime other) { return toEpochNano() < other.toEpochNano(); } /** * Checks if the instant of this {@code OffsetTime} is equal to that of the * specified time applying both times to a common date. *

* This method differs from the comparison in {@link #compareTo} and {@link #equals} * in that it only compares the instant of the time. This is equivalent to converting both * times to an instant using the same date and comparing the instants. * * @param other the other time to compare to, not null * @return true if this is equal to the instant of the specified time */ public boolean isEqual(OffsetTime other) { return toEpochNano() == other.toEpochNano(); } //----------------------------------------------------------------------- /** * Checks if this time is equal to another time. *

* The comparison is based on the local-time and the offset. * To compare for the same instant on the time-line, use {@link #isEqual(OffsetTime)}. *

* Only objects of type {@code OffsetTime} are compared, other types return false. * To compare the underlying local time of two {@code TemporalAccessor} instances, * use {@link ChronoField#NANO_OF_DAY} as a comparator. * * @param obj the object to check, null returns false * @return true if this is equal to the other time */ @Override public boolean equals(Object obj) { if (this == obj) { return true; } if (obj instanceof OffsetTime) { OffsetTime other = (OffsetTime) obj; return time.equals(other.time) && offset.equals(other.offset); } return false; } /** * A hash code for this time. * * @return a suitable hash code */ @Override public int hashCode() { return time.hashCode() ^ offset.hashCode(); } //----------------------------------------------------------------------- /** * Outputs this time as a {@code String}, such as {@code 10:15:30+01:00}. *

* The output will be one of the following ISO-8601 formats: *

* The format used will be the shortest that outputs the full value of * the time where the omitted parts are implied to be zero. * * @return a string representation of this time, not null */ @Override public String toString() { return time.toString() + offset.toString(); } //----------------------------------------------------------------------- /** * Writes the object using a * dedicated serialized form. * @serialData *
     *  out.writeByte(9);  // identifies an OffsetTime
     *  // the time excluding the one byte header
     *  // the offset excluding the one byte header
     * 
* * @return the instance of {@code Ser}, not null */ private Object writeReplace() { return new Ser(Ser.OFFSET_TIME_TYPE, this); } /** * Defend against malicious streams. * * @param s the stream to read * @throws InvalidObjectException always */ private void readObject(ObjectInputStream s) throws InvalidObjectException { throw new InvalidObjectException("Deserialization via serialization delegate"); } void writeExternal(ObjectOutput out) throws IOException { time.writeExternal(out); offset.writeExternal(out); } static OffsetTime readExternal(ObjectInput in) throws IOException, ClassNotFoundException { LocalTime time = LocalTime.readExternal(in); ZoneOffset offset = ZoneOffset.readExternal(in); return OffsetTime.of(time, offset); } }