Date represents a specific instant
* in time, with millisecond precision.
*
* Prior to JDK 1.1, the class Date had two additional
* functions. It allowed the interpretation of dates as year, month, day, hour,
* minute, and second values. It also allowed the formatting and parsing
* of date strings. Unfortunately, the API for these functions was not
* amenable to internationalization. As of JDK 1.1, the
* Calendar class should be used to convert between dates and time
* fields and the DateFormat class should be used to format and
* parse date strings.
* The corresponding methods in Date are deprecated.
*
* Although the Date class is intended to reflect
* coordinated universal time (UTC), it may not do so exactly,
* depending on the host environment of the Java Virtual Machine.
* Nearly all modern operating systems assume that 1 day =
* 24 × 60 × 60 = 86400 seconds
* in all cases. In UTC, however, about once every year or two there
* is an extra second, called a "leap second." The leap
* second is always added as the last second of the day, and always
* on December 31 or June 30. For example, the last minute of the
* year 1995 was 61 seconds long, thanks to an added leap second.
* Most computer clocks are not accurate enough to be able to reflect
* the leap-second distinction.
*
* Some computer standards are defined in terms of Greenwich mean * time (GMT), which is equivalent to universal time (UT). GMT is * the "civil" name for the standard; UT is the * "scientific" name for the same standard. The * distinction between UTC and UT is that UTC is based on an atomic * clock and UT is based on astronomical observations, which for all * practical purposes is an invisibly fine hair to split. Because the * earth's rotation is not uniform (it slows down and speeds up * in complicated ways), UT does not always flow uniformly. Leap * seconds are introduced as needed into UTC so as to keep UTC within * 0.9 seconds of UT1, which is a version of UT with certain * corrections applied. There are other time and date systems as * well; for example, the time scale used by the satellite-based * global positioning system (GPS) is synchronized to UTC but is * not adjusted for leap seconds. An interesting source of * further information is the U.S. Naval Observatory, particularly * the Directorate of Time at: *
** http://tycho.usno.navy.mil *
* and their definitions of "Systems of Time" at: *
** http://tycho.usno.navy.mil/systime.html *
* In all methods of class Date that accept or return
* year, month, date, hours, minutes, and seconds values, the
* following representations are used:
*
- 1900.
*
* In all cases, arguments given to methods for these purposes need
* not fall within the indicated ranges; for example, a date may be
* specified as January 32 and is interpreted as meaning February 1.
*
* @author James Gosling
* @author Arthur van Hoff
* @author Alan Liu
* @see java.text.DateFormat
* @see java.util.Calendar
* @see java.util.TimeZone
* @since JDK1.0
*/
public class Date
implements java.io.Serializable, Cloneable, Comparable
* It accepts many syntaxes; in particular, it recognizes the IETF
* standard date syntax: "Sat, 12 Aug 1995 13:30:00 GMT". It also
* understands the continental U.S. time-zone abbreviations, but for
* general use, a time-zone offset should be used: "Sat, 12 Aug 1995
* 13:30:00 GMT+0430" (4 hours, 30 minutes west of the Greenwich
* meridian). If no time zone is specified, the local time zone is
* assumed. GMT and UTC are considered equivalent.
*
* The string s is processed from left to right, looking for
* data of interest. Any material in s that is within the
* ASCII parenthesis characters ( and ) is ignored.
* Parentheses may be nested. Otherwise, the only characters permitted
* within s are these ASCII characters:
*
* A consecutive sequence of decimal digits is treated as a decimal
* number:
* A consecutive sequence of letters is regarded as a word and treated
* as follows:
* Once the entire string s has been scanned, it is converted to a time
* result in one of two ways. If a time zone or time-zone offset has been
* recognized, then the year, month, day of month, hour, minute, and
* second are interpreted in UTC and then the time-zone offset is
* applied. Otherwise, the year, month, day of month, hour, minute, and
* second are interpreted in the local time zone.
*
* @param s a string to be parsed as a date.
* @return the number of milliseconds since January 1, 1970, 00:00:00 GMT
* represented by the string argument.
* @see java.text.DateFormat
* @deprecated As of JDK version 1.1,
* replaced by
* Thus, two
* The result does not depend on the local time zone.
*
* @return a string representation of this date, using the Internet GMT
* conventions.
* @see java.text.DateFormat
* @see java.util.Date#toString()
* @see java.util.Date#toLocaleString()
* @deprecated As of JDK version 1.1,
* replaced by
* For example, in Massachusetts, five time zones west of Greenwich:
*
* This method produces the same result as if it computed:
*
* {@code Instant} uses a precision of nanoseconds, whereas {@code Date}
* uses a precision of milliseconds. The conversion will trancate any
* excess precision information as though the amount in nanoseconds was
* subject to integer division by one million.
*
* {@code Instant} can store points on the time-line further in the future
* and further in the past than {@code Date}. In this scenario, this method
* will throw an exception.
*
* @param instant the instant to convert
* @return a {@code Date} representing the same point on the time-line as
* the provided instant
* @exception NullPointerException if {@code instant} is null.
* @exception IllegalArgumentException if the instant is too large to
* represent as a {@code Date}
* @since 1.8
*/
public static Date from(Instant instant) {
try {
return new Date(instant.toEpochMilli());
} catch (ArithmeticException ex) {
throw new IllegalArgumentException(ex);
}
}
/**
* Converts this {@code Date} object to an {@code Instant}.
*
* The conversion creates an {@code Instant} that represents the same
* point on the time-line as this {@code Date}.
*
* @return an instant representing the same point on the time-line as
* this {@code Date} object
* @since 1.8
*/
public Instant toInstant() {
return Instant.ofEpochMilli(getTime());
}
}
Date object and initializes it so that
* it represents the time at which it was allocated, measured to the
* nearest millisecond.
*
* @see java.lang.System#currentTimeMillis()
*/
public Date() {
this(System.currentTimeMillis());
}
/**
* Allocates a Date object and initializes it to
* represent the specified number of milliseconds since the
* standard base time known as "the epoch", namely January 1,
* 1970, 00:00:00 GMT.
*
* @param date the milliseconds since January 1, 1970, 00:00:00 GMT.
* @see java.lang.System#currentTimeMillis()
*/
public Date(long date) {
fastTime = date;
}
/**
* Allocates a Date object and initializes it so that
* it represents midnight, local time, at the beginning of the day
* specified by the year, month, and
* date arguments.
*
* @param year the year minus 1900.
* @param month the month between 0-11.
* @param date the day of the month between 1-31.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(year + 1900, month, date)
* or GregorianCalendar(year + 1900, month, date).
*/
@Deprecated
public Date(int year, int month, int date) {
this(year, month, date, 0, 0, 0);
}
/**
* Allocates a Date object and initializes it so that
* it represents the instant at the start of the minute specified by
* the year, month, date,
* hrs, and min arguments, in the local
* time zone.
*
* @param year the year minus 1900.
* @param month the month between 0-11.
* @param date the day of the month between 1-31.
* @param hrs the hours between 0-23.
* @param min the minutes between 0-59.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(year + 1900, month, date,
* hrs, min) or GregorianCalendar(year + 1900,
* month, date, hrs, min).
*/
@Deprecated
public Date(int year, int month, int date, int hrs, int min) {
this(year, month, date, hrs, min, 0);
}
/**
* Allocates a Date object and initializes it so that
* it represents the instant at the start of the second specified
* by the year, month, date,
* hrs, min, and sec arguments,
* in the local time zone.
*
* @param year the year minus 1900.
* @param month the month between 0-11.
* @param date the day of the month between 1-31.
* @param hrs the hours between 0-23.
* @param min the minutes between 0-59.
* @param sec the seconds between 0-59.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(year + 1900, month, date,
* hrs, min, sec) or GregorianCalendar(year + 1900,
* month, date, hrs, min, sec).
*/
@Deprecated
public Date(int year, int month, int date, int hrs, int min, int sec) {
int y = year + 1900;
// month is 0-based. So we have to normalize month to support Long.MAX_VALUE.
if (month >= 12) {
y += month / 12;
month %= 12;
} else if (month < 0) {
y += CalendarUtils.floorDivide(month, 12);
month = CalendarUtils.mod(month, 12);
}
BaseCalendar cal = getCalendarSystem(y);
cdate = (BaseCalendar.Date) cal.newCalendarDate(TimeZone.getDefaultRef());
cdate.setNormalizedDate(y, month + 1, date).setTimeOfDay(hrs, min, sec, 0);
getTimeImpl();
cdate = null;
}
/**
* Allocates a Date object and initializes it so that
* it represents the date and time indicated by the string
* s, which is interpreted as if by the
* {@link Date#parse} method.
*
* @param s a string representation of the date.
* @see java.text.DateFormat
* @see java.util.Date#parse(java.lang.String)
* @deprecated As of JDK version 1.1,
* replaced by DateFormat.parse(String s).
*/
@Deprecated
public Date(String s) {
this(parse(s));
}
/**
* Return a copy of this object.
*/
public Object clone() {
Date d = null;
try {
d = (Date)super.clone();
if (cdate != null) {
d.cdate = (BaseCalendar.Date) cdate.clone();
}
} catch (CloneNotSupportedException e) {} // Won't happen
return d;
}
/**
* Determines the date and time based on the arguments. The
* arguments are interpreted as a year, month, day of the month,
* hour of the day, minute within the hour, and second within the
* minute, exactly as for the Date constructor with six
* arguments, except that the arguments are interpreted relative
* to UTC rather than to the local time zone. The time indicated is
* returned represented as the distance, measured in milliseconds,
* of that time from the epoch (00:00:00 GMT on January 1, 1970).
*
* @param year the year minus 1900.
* @param month the month between 0-11.
* @param date the day of the month between 1-31.
* @param hrs the hours between 0-23.
* @param min the minutes between 0-59.
* @param sec the seconds between 0-59.
* @return the number of milliseconds since January 1, 1970, 00:00:00 GMT for
* the date and time specified by the arguments.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(year + 1900, month, date,
* hrs, min, sec) or GregorianCalendar(year + 1900,
* month, date, hrs, min, sec), using a UTC
* TimeZone, followed by Calendar.getTime().getTime().
*/
@Deprecated
public static long UTC(int year, int month, int date,
int hrs, int min, int sec) {
int y = year + 1900;
// month is 0-based. So we have to normalize month to support Long.MAX_VALUE.
if (month >= 12) {
y += month / 12;
month %= 12;
} else if (month < 0) {
y += CalendarUtils.floorDivide(month, 12);
month = CalendarUtils.mod(month, 12);
}
int m = month + 1;
BaseCalendar cal = getCalendarSystem(y);
BaseCalendar.Date udate = (BaseCalendar.Date) cal.newCalendarDate(null);
udate.setNormalizedDate(y, m, date).setTimeOfDay(hrs, min, sec, 0);
// Use a Date instance to perform normalization. Its fastTime
// is the UTC value after the normalization.
Date d = new Date(0);
d.normalize(udate);
return d.fastTime;
}
/**
* Attempts to interpret the string s as a representation
* of a date and time. If the attempt is successful, the time
* indicated is returned represented as the distance, measured in
* milliseconds, of that time from the epoch (00:00:00 GMT on
* January 1, 1970). If the attempt fails, an
* IllegalArgumentException is thrown.
*
* and whitespace characters.
* abcdefghijklmnopqrstuvwxyz
* ABCDEFGHIJKLMNOPQRSTUVWXYZ
* 0123456789,+-:/
*
*
* If the recognized year number is less than 100, it is
* interpreted as an abbreviated year relative to a century of
* which dates are within 80 years before and 19 years after
* the time when the Date class is initialized.
* After adjusting the year number, 1900 is subtracted from
* it. For example, if the current year is 1999 then years in
* the range 19 to 99 are assumed to mean 1919 to 1999, while
* years from 0 to 18 are assumed to mean 2000 to 2018. Note
* that this is slightly different from the interpretation of
* years less than 100 that is used in {@link java.text.SimpleDateFormat}.
*
*
DateFormat.parse(String s).
*/
@Deprecated
public static long parse(String s) {
int year = Integer.MIN_VALUE;
int mon = -1;
int mday = -1;
int hour = -1;
int min = -1;
int sec = -1;
int millis = -1;
int c = -1;
int i = 0;
int n = -1;
int wst = -1;
int tzoffset = -1;
int prevc = 0;
syntax:
{
if (s == null)
break syntax;
int limit = s.length();
while (i < limit) {
c = s.charAt(i);
i++;
if (c <= ' ' || c == ',')
continue;
if (c == '(') { // skip comments
int depth = 1;
while (i < limit) {
c = s.charAt(i);
i++;
if (c == '(') depth++;
else if (c == ')')
if (--depth <= 0)
break;
}
continue;
}
if ('0' <= c && c <= '9') {
n = c - '0';
while (i < limit && '0' <= (c = s.charAt(i)) && c <= '9') {
n = n * 10 + c - '0';
i++;
}
if (prevc == '+' || prevc == '-' && year != Integer.MIN_VALUE) {
// BEGIN Android-changed: Android specific time zone logic
if (tzoffset != 0 && tzoffset != -1)
break syntax;
// timezone offset
if (n < 24) {
n = n * 60; // EG. "GMT-3"
// Support for Timezones of the form GMT-3:30. We look for an ':" and
// parse the number following it as loosely as the original hours
// section (i.e, no range or validity checks).
int minutesPart = 0;
if (i < limit && (s.charAt(i) == ':')) {
i++;
while (i < limit && '0' <= (c = s.charAt(i)) && c <= '9') {
minutesPart = (minutesPart * 10) + (c - '0');
i++;
}
}
n += minutesPart;
} else {
n = (n % 100) + ((n / 100) * 60); // eg "GMT-0430"
}
if (prevc == '+') // plus means east of GMT
n = -n;
// END Android-changed: Android specific time zone logic
tzoffset = n;
} else if (n >= 70)
if (year != Integer.MIN_VALUE)
break syntax;
else if (c <= ' ' || c == ',' || c == '/' || i >= limit)
// year = n < 1900 ? n : n - 1900;
year = n;
else
break syntax;
else if (c == ':')
if (hour < 0)
hour = (byte) n;
else if (min < 0)
min = (byte) n;
else
break syntax;
else if (c == '/')
if (mon < 0)
mon = (byte) (n - 1);
else if (mday < 0)
mday = (byte) n;
else
break syntax;
else if (i < limit && c != ',' && c > ' ' && c != '-')
break syntax;
else if (hour >= 0 && min < 0)
min = (byte) n;
else if (min >= 0 && sec < 0)
sec = (byte) n;
else if (mday < 0)
mday = (byte) n;
// Handle two-digit years < 70 (70-99 handled above).
else if (year == Integer.MIN_VALUE && mon >= 0 && mday >= 0)
year = n;
else
break syntax;
prevc = 0;
} else if (c == '/' || c == ':' || c == '+' || c == '-')
prevc = c;
else {
int st = i - 1;
while (i < limit) {
c = s.charAt(i);
if (!('A' <= c && c <= 'Z' || 'a' <= c && c <= 'z'))
break;
i++;
}
if (i <= st + 1)
break syntax;
int k;
for (k = wtb.length; --k >= 0;)
if (wtb[k].regionMatches(true, 0, s, st, i - st)) {
int action = ttb[k];
if (action != 0) {
if (action == 1) { // pm
if (hour > 12 || hour < 1)
break syntax;
else if (hour < 12)
hour += 12;
} else if (action == 14) { // am
if (hour > 12 || hour < 1)
break syntax;
else if (hour == 12)
hour = 0;
} else if (action <= 13) { // month!
if (mon < 0)
mon = (byte) (action - 2);
else
break syntax;
} else {
tzoffset = action - 10000;
}
}
break;
}
if (k < 0)
break syntax;
prevc = 0;
}
}
if (year == Integer.MIN_VALUE || mon < 0 || mday < 0)
break syntax;
// Parse 2-digit years within the correct default century.
if (year < 100) {
synchronized (Date.class) {
if (defaultCenturyStart == 0) {
defaultCenturyStart = gcal.getCalendarDate().getYear() - 80;
}
}
year += (defaultCenturyStart / 100) * 100;
if (year < defaultCenturyStart) year += 100;
}
if (sec < 0)
sec = 0;
if (min < 0)
min = 0;
if (hour < 0)
hour = 0;
BaseCalendar cal = getCalendarSystem(year);
if (tzoffset == -1) { // no time zone specified, have to use local
BaseCalendar.Date ldate = (BaseCalendar.Date) cal.newCalendarDate(TimeZone.getDefaultRef());
ldate.setDate(year, mon + 1, mday);
ldate.setTimeOfDay(hour, min, sec, 0);
return cal.getTime(ldate);
}
BaseCalendar.Date udate = (BaseCalendar.Date) cal.newCalendarDate(null); // no time zone
udate.setDate(year, mon + 1, mday);
udate.setTimeOfDay(hour, min, sec, 0);
return cal.getTime(udate) + tzoffset * (60 * 1000);
}
// syntax error
throw new IllegalArgumentException();
}
private final static String wtb[] = {
"am", "pm",
"monday", "tuesday", "wednesday", "thursday", "friday",
"saturday", "sunday",
"january", "february", "march", "april", "may", "june",
"july", "august", "september", "october", "november", "december",
"gmt", "ut", "utc", "est", "edt", "cst", "cdt",
"mst", "mdt", "pst", "pdt"
};
private final static int ttb[] = {
14, 1, 0, 0, 0, 0, 0, 0, 0,
2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
10000 + 0, 10000 + 0, 10000 + 0, // GMT/UT/UTC
10000 + 5 * 60, 10000 + 4 * 60, // EST/EDT
10000 + 6 * 60, 10000 + 5 * 60, // CST/CDT
10000 + 7 * 60, 10000 + 6 * 60, // MST/MDT
10000 + 8 * 60, 10000 + 7 * 60 // PST/PDT
};
/**
* Returns a value that is the result of subtracting 1900 from the
* year that contains or begins with the instant in time represented
* by this Date object, as interpreted in the local
* time zone.
*
* @return the year represented by this date, minus 1900.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.get(Calendar.YEAR) - 1900.
*/
@Deprecated
public int getYear() {
return normalize().getYear() - 1900;
}
/**
* Sets the year of this Date object to be the specified
* value plus 1900. This Date object is modified so
* that it represents a point in time within the specified year,
* with the month, date, hour, minute, and second the same as
* before, as interpreted in the local time zone. (Of course, if
* the date was February 29, for example, and the year is set to a
* non-leap year, then the new date will be treated as if it were
* on March 1.)
*
* @param year the year value.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(Calendar.YEAR, year + 1900).
*/
@Deprecated
public void setYear(int year) {
getCalendarDate().setNormalizedYear(year + 1900);
}
/**
* Returns a number representing the month that contains or begins
* with the instant in time represented by this Date object.
* The value returned is between 0 and 11,
* with the value 0 representing January.
*
* @return the month represented by this date.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.get(Calendar.MONTH).
*/
@Deprecated
public int getMonth() {
return normalize().getMonth() - 1; // adjust 1-based to 0-based
}
/**
* Sets the month of this date to the specified value. This
* Date object is modified so that it represents a point
* in time within the specified month, with the year, date, hour,
* minute, and second the same as before, as interpreted in the
* local time zone. If the date was October 31, for example, and
* the month is set to June, then the new date will be treated as
* if it were on July 1, because June has only 30 days.
*
* @param month the month value between 0-11.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(Calendar.MONTH, int month).
*/
@Deprecated
public void setMonth(int month) {
int y = 0;
if (month >= 12) {
y = month / 12;
month %= 12;
} else if (month < 0) {
y = CalendarUtils.floorDivide(month, 12);
month = CalendarUtils.mod(month, 12);
}
BaseCalendar.Date d = getCalendarDate();
if (y != 0) {
d.setNormalizedYear(d.getNormalizedYear() + y);
}
d.setMonth(month + 1); // adjust 0-based to 1-based month numbering
}
/**
* Returns the day of the month represented by this Date object.
* The value returned is between 1 and 31
* representing the day of the month that contains or begins with the
* instant in time represented by this Date object, as
* interpreted in the local time zone.
*
* @return the day of the month represented by this date.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.get(Calendar.DAY_OF_MONTH).
*/
@Deprecated
// Android-removed stray @deprecated tag.
public int getDate() {
return normalize().getDayOfMonth();
}
/**
* Sets the day of the month of this Date object to the
* specified value. This Date object is modified so that
* it represents a point in time within the specified day of the
* month, with the year, month, hour, minute, and second the same
* as before, as interpreted in the local time zone. If the date
* was April 30, for example, and the date is set to 31, then it
* will be treated as if it were on May 1, because April has only
* 30 days.
*
* @param date the day of the month value between 1-31.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(Calendar.DAY_OF_MONTH, int date).
*/
@Deprecated
public void setDate(int date) {
getCalendarDate().setDayOfMonth(date);
}
/**
* Returns the day of the week represented by this date. The
* returned value (0 = Sunday, 1 = Monday,
* 2 = Tuesday, 3 = Wednesday, 4 =
* Thursday, 5 = Friday, 6 = Saturday)
* represents the day of the week that contains or begins with
* the instant in time represented by this Date object,
* as interpreted in the local time zone.
*
* @return the day of the week represented by this date.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.get(Calendar.DAY_OF_WEEK).
*/
@Deprecated
public int getDay() {
return normalize().getDayOfWeek() - BaseCalendar.SUNDAY;
}
/**
* Returns the hour represented by this Date object. The
* returned value is a number (0 through 23)
* representing the hour within the day that contains or begins
* with the instant in time represented by this Date
* object, as interpreted in the local time zone.
*
* @return the hour represented by this date.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.get(Calendar.HOUR_OF_DAY).
*/
@Deprecated
public int getHours() {
return normalize().getHours();
}
/**
* Sets the hour of this Date object to the specified value.
* This Date object is modified so that it represents a point
* in time within the specified hour of the day, with the year, month,
* date, minute, and second the same as before, as interpreted in the
* local time zone.
*
* @param hours the hour value.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(Calendar.HOUR_OF_DAY, int hours).
*/
@Deprecated
public void setHours(int hours) {
getCalendarDate().setHours(hours);
}
/**
* Returns the number of minutes past the hour represented by this date,
* as interpreted in the local time zone.
* The value returned is between 0 and 59.
*
* @return the number of minutes past the hour represented by this date.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.get(Calendar.MINUTE).
*/
@Deprecated
public int getMinutes() {
return normalize().getMinutes();
}
/**
* Sets the minutes of this Date object to the specified value.
* This Date object is modified so that it represents a point
* in time within the specified minute of the hour, with the year, month,
* date, hour, and second the same as before, as interpreted in the
* local time zone.
*
* @param minutes the value of the minutes.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(Calendar.MINUTE, int minutes).
*/
@Deprecated
public void setMinutes(int minutes) {
getCalendarDate().setMinutes(minutes);
}
/**
* Returns the number of seconds past the minute represented by this date.
* The value returned is between 0 and 61. The
* values 60 and 61 can only occur on those
* Java Virtual Machines that take leap seconds into account.
*
* @return the number of seconds past the minute represented by this date.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.get(Calendar.SECOND).
*/
@Deprecated
public int getSeconds() {
return normalize().getSeconds();
}
/**
* Sets the seconds of this Date to the specified value.
* This Date object is modified so that it represents a
* point in time within the specified second of the minute, with
* the year, month, date, hour, and minute the same as before, as
* interpreted in the local time zone.
*
* @param seconds the seconds value.
* @see java.util.Calendar
* @deprecated As of JDK version 1.1,
* replaced by Calendar.set(Calendar.SECOND, int seconds).
*/
@Deprecated
public void setSeconds(int seconds) {
getCalendarDate().setSeconds(seconds);
}
/**
* Returns the number of milliseconds since January 1, 1970, 00:00:00 GMT
* represented by this Date object.
*
* @return the number of milliseconds since January 1, 1970, 00:00:00 GMT
* represented by this date.
*/
public long getTime() {
return getTimeImpl();
}
private final long getTimeImpl() {
if (cdate != null && !cdate.isNormalized()) {
normalize();
}
return fastTime;
}
/**
* Sets this Date object to represent a point in time that is
* time milliseconds after January 1, 1970 00:00:00 GMT.
*
* @param time the number of milliseconds.
*/
public void setTime(long time) {
fastTime = time;
cdate = null;
}
/**
* Tests if this date is before the specified date.
*
* @param when a date.
* @return true if and only if the instant of time
* represented by this Date object is strictly
* earlier than the instant represented by when;
* false otherwise.
* @exception NullPointerException if when is null.
*/
public boolean before(Date when) {
return getMillisOf(this) < getMillisOf(when);
}
/**
* Tests if this date is after the specified date.
*
* @param when a date.
* @return true if and only if the instant represented
* by this Date object is strictly later than the
* instant represented by when;
* false otherwise.
* @exception NullPointerException if when is null.
*/
public boolean after(Date when) {
return getMillisOf(this) > getMillisOf(when);
}
/**
* Compares two dates for equality.
* The result is true if and only if the argument is
* not null and is a Date object that
* represents the same point in time, to the millisecond, as this object.
* Date objects are equal if and only if the
* getTime method returns the same long
* value for both.
*
* @param obj the object to compare with.
* @return true if the objects are the same;
* false otherwise.
* @see java.util.Date#getTime()
*/
public boolean equals(Object obj) {
return obj instanceof Date && getTime() == ((Date) obj).getTime();
}
/**
* Returns the millisecond value of this Date object
* without affecting its internal state.
*/
static final long getMillisOf(Date date) {
if (date.cdate == null || date.cdate.isNormalized()) {
return date.fastTime;
}
BaseCalendar.Date d = (BaseCalendar.Date) date.cdate.clone();
return gcal.getTime(d);
}
/**
* Compares two Dates for ordering.
*
* @param anotherDate the Date to be compared.
* @return the value 0 if the argument Date is equal to
* this Date; a value less than 0 if this Date
* is before the Date argument; and a value greater than
* 0 if this Date is after the Date argument.
* @since 1.2
* @exception NullPointerException if anotherDate is null.
*/
public int compareTo(Date anotherDate) {
long thisTime = getMillisOf(this);
long anotherTime = getMillisOf(anotherDate);
return (thisTime
*
* @return a hash code value for this object.
*/
public int hashCode() {
long ht = this.getTime();
return (int) ht ^ (int) (ht >> 32);
}
/**
* Converts this {@code
* (int)(this.getTime()^(this.getTime() >>> 32))
* }Date object to a String
* of the form:
*
* where:
* dow mon dd hh:mm:ss zzz yyyy
*
*
* @return a string representation of this date.
* @see java.util.Date#toLocaleString()
* @see java.util.Date#toGMTString()
*/
public String toString() {
// "EEE MMM dd HH:mm:ss zzz yyyy";
BaseCalendar.Date date = normalize();
StringBuilder sb = new StringBuilder(28);
int index = date.getDayOfWeek();
if (index == BaseCalendar.SUNDAY) {
index = 8;
}
convertToAbbr(sb, wtb[index]).append(' '); // EEE
convertToAbbr(sb, wtb[date.getMonth() - 1 + 2 + 7]).append(' '); // MMM
CalendarUtils.sprintf0d(sb, date.getDayOfMonth(), 2).append(' '); // dd
CalendarUtils.sprintf0d(sb, date.getHours(), 2).append(':'); // HH
CalendarUtils.sprintf0d(sb, date.getMinutes(), 2).append(':'); // mm
CalendarUtils.sprintf0d(sb, date.getSeconds(), 2).append(' '); // ss
TimeZone zi = date.getZone();
if (zi != null) {
sb.append(zi.getDisplayName(date.isDaylightTime(), TimeZone.SHORT, Locale.US)); // zzz
} else {
sb.append("GMT");
}
sb.append(' ').append(date.getYear()); // yyyy
return sb.toString();
}
/**
* Converts the given name to its 3-letter abbreviation (e.g.,
* "monday" -> "Mon") and stored the abbreviation in the given
* StringBuilder.
*/
private static final StringBuilder convertToAbbr(StringBuilder sb, String name) {
sb.append(Character.toUpperCase(name.charAt(0)));
sb.append(name.charAt(1)).append(name.charAt(2));
return sb;
}
/**
* Creates a string representation of this Date object in an
* implementation-dependent form. The intent is that the form should
* be familiar to the user of the Java application, wherever it may
* happen to be running. The intent is comparable to that of the
* "%c" format supported by the strftime()
* function of ISO C.
*
* @return a string representation of this date, using the locale
* conventions.
* @see java.text.DateFormat
* @see java.util.Date#toString()
* @see java.util.Date#toGMTString()
* @deprecated As of JDK version 1.1,
* replaced by DateFormat.format(Date date).
*/
@Deprecated
public String toLocaleString() {
DateFormat formatter = DateFormat.getDateTimeInstance();
return formatter.format(this);
}
/**
* Creates a string representation of this Date object of
* the form:
*
* where:
* d mon yyyy hh:mm:ss GMT
*
DateFormat.format(Date date), using a
* GMT TimeZone.
*/
@Deprecated
public String toGMTString() {
// d MMM yyyy HH:mm:ss 'GMT'
long t = getTime();
BaseCalendar cal = getCalendarSystem(t);
BaseCalendar.Date date =
(BaseCalendar.Date) cal.getCalendarDate(getTime(), (TimeZone)null);
StringBuilder sb = new StringBuilder(32);
CalendarUtils.sprintf0d(sb, date.getDayOfMonth(), 1).append(' '); // d
convertToAbbr(sb, wtb[date.getMonth() - 1 + 2 + 7]).append(' '); // MMM
sb.append(date.getYear()).append(' '); // yyyy
CalendarUtils.sprintf0d(sb, date.getHours(), 2).append(':'); // HH
CalendarUtils.sprintf0d(sb, date.getMinutes(), 2).append(':'); // mm
CalendarUtils.sprintf0d(sb, date.getSeconds(), 2); // ss
sb.append(" GMT"); // ' GMT'
return sb.toString();
}
/**
* Returns the offset, measured in minutes, for the local time zone
* relative to UTC that is appropriate for the time represented by
* this Date object.
*
* because on February 14, 1996, standard time (Eastern Standard Time)
* is in use, which is offset five hours from UTC; but:
*
* new Date(96, 1, 14).getTimezoneOffset() returns 300
* because on June 1, 1996, daylight saving time (Eastern Daylight Time)
* is in use, which is offset only four hours from UTC.
* new Date(96, 5, 1).getTimezoneOffset() returns 240
*
* @return the time-zone offset, in minutes, for the current time zone.
* @see java.util.Calendar#ZONE_OFFSET
* @see java.util.Calendar#DST_OFFSET
* @see java.util.TimeZone#getDefault
* @deprecated As of JDK version 1.1,
* replaced by
* (this.getTime() - UTC(this.getYear(),
* this.getMonth(),
* this.getDate(),
* this.getHours(),
* this.getMinutes(),
* this.getSeconds())) / (60 * 1000)
* -(Calendar.get(Calendar.ZONE_OFFSET) +
* Calendar.get(Calendar.DST_OFFSET)) / (60 * 1000).
*/
@Deprecated
public int getTimezoneOffset() {
int zoneOffset;
if (cdate == null) {
// Android-changed: Android specific time zone logic
GregorianCalendar cal = new GregorianCalendar(fastTime);
zoneOffset = (cal.get(Calendar.ZONE_OFFSET) + cal.get(Calendar.DST_OFFSET));
} else {
normalize();
zoneOffset = cdate.getZoneOffset();
}
return -zoneOffset/60000; // convert to minutes
}
private final BaseCalendar.Date getCalendarDate() {
if (cdate == null) {
BaseCalendar cal = getCalendarSystem(fastTime);
cdate = (BaseCalendar.Date) cal.getCalendarDate(fastTime,
TimeZone.getDefaultRef());
}
return cdate;
}
private final BaseCalendar.Date normalize() {
if (cdate == null) {
BaseCalendar cal = getCalendarSystem(fastTime);
cdate = (BaseCalendar.Date) cal.getCalendarDate(fastTime,
TimeZone.getDefaultRef());
return cdate;
}
// Normalize cdate with the TimeZone in cdate first. This is
// required for the compatible behavior.
if (!cdate.isNormalized()) {
cdate = normalize(cdate);
}
// If the default TimeZone has changed, then recalculate the
// fields with the new TimeZone.
TimeZone tz = TimeZone.getDefaultRef();
if (tz != cdate.getZone()) {
cdate.setZone(tz);
CalendarSystem cal = getCalendarSystem(cdate);
cal.getCalendarDate(fastTime, cdate);
}
return cdate;
}
// fastTime and the returned data are in sync upon return.
private final BaseCalendar.Date normalize(BaseCalendar.Date date) {
int y = date.getNormalizedYear();
int m = date.getMonth();
int d = date.getDayOfMonth();
int hh = date.getHours();
int mm = date.getMinutes();
int ss = date.getSeconds();
int ms = date.getMillis();
TimeZone tz = date.getZone();
// If the specified year can't be handled using a long value
// in milliseconds, GregorianCalendar is used for full
// compatibility with underflow and overflow. This is required
// by some JCK tests. The limits are based max year values -
// years that can be represented by max values of d, hh, mm,
// ss and ms. Also, let GregorianCalendar handle the default
// cutover year so that we don't need to worry about the
// transition here.
if (y == 1582 || y > 280000000 || y < -280000000) {
if (tz == null) {
tz = TimeZone.getTimeZone("GMT");
}
GregorianCalendar gc = new GregorianCalendar(tz);
gc.clear();
gc.set(GregorianCalendar.MILLISECOND, ms);
gc.set(y, m-1, d, hh, mm, ss);
fastTime = gc.getTimeInMillis();
BaseCalendar cal = getCalendarSystem(fastTime);
date = (BaseCalendar.Date) cal.getCalendarDate(fastTime, tz);
return date;
}
BaseCalendar cal = getCalendarSystem(y);
if (cal != getCalendarSystem(date)) {
date = (BaseCalendar.Date) cal.newCalendarDate(tz);
date.setNormalizedDate(y, m, d).setTimeOfDay(hh, mm, ss, ms);
}
// Perform the GregorianCalendar-style normalization.
fastTime = cal.getTime(date);
// In case the normalized date requires the other calendar
// system, we need to recalculate it using the other one.
BaseCalendar ncal = getCalendarSystem(fastTime);
if (ncal != cal) {
date = (BaseCalendar.Date) ncal.newCalendarDate(tz);
date.setNormalizedDate(y, m, d).setTimeOfDay(hh, mm, ss, ms);
fastTime = ncal.getTime(date);
}
return date;
}
/**
* Returns the Gregorian or Julian calendar system to use with the
* given date. Use Gregorian from October 15, 1582.
*
* @param year normalized calendar year (not -1900)
* @return the CalendarSystem to use for the specified date
*/
private static final BaseCalendar getCalendarSystem(int year) {
if (year >= 1582) {
return gcal;
}
return getJulianCalendar();
}
private static final BaseCalendar getCalendarSystem(long utc) {
// Quickly check if the time stamp given by `utc' is the Epoch
// or later. If it's before 1970, we convert the cutover to
// local time to compare.
if (utc >= 0
|| utc >= GregorianCalendar.DEFAULT_GREGORIAN_CUTOVER
- TimeZone.getDefaultRef().getOffset(utc)) {
return gcal;
}
return getJulianCalendar();
}
private static final BaseCalendar getCalendarSystem(BaseCalendar.Date cdate) {
if (jcal == null) {
return gcal;
}
if (cdate.getEra() != null) {
return jcal;
}
return gcal;
}
synchronized private static final BaseCalendar getJulianCalendar() {
if (jcal == null) {
jcal = (BaseCalendar) CalendarSystem.forName("julian");
}
return jcal;
}
/**
* Save the state of this object to a stream (i.e., serialize it).
*
* @serialData The value returned by getTime()
* is emitted (long). This represents the offset from
* January 1, 1970, 00:00:00 GMT in milliseconds.
*/
private void writeObject(ObjectOutputStream s)
throws IOException
{
s.writeLong(getTimeImpl());
}
/**
* Reconstitute this object from a stream (i.e., deserialize it).
*/
private void readObject(ObjectInputStream s)
throws IOException, ClassNotFoundException
{
fastTime = s.readLong();
}
/**
* Obtains an instance of {@code Date} from an {@code Instant} object.
*