/*
 * Copyright (C) 2017 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.bluetooth;

/**
 * This abstract class is used to implement {@link BluetoothGatt} callbacks.
 */
public abstract class BluetoothGattCallback{

    /**
     * Callback triggered as result of {@link BluetoothGatt#setPreferredPhy}, or as a result of
     * remote device changing the PHY.
     *
     * @param gatt GATT client
     * @param txPhy the transmitter PHY in use. One of {@link BluetoothDevice#PHY_LE_1M},
     *             {@link BluetoothDevice#PHY_LE_2M}, and {@link BluetoothDevice#PHY_LE_CODED}.
     * @param rxPhy the receiver PHY in use. One of {@link BluetoothDevice#PHY_LE_1M},
     *             {@link BluetoothDevice#PHY_LE_2M}, and {@link BluetoothDevice#PHY_LE_CODED}.
     * @param status Status of the PHY update operation.
     *                  {@link BluetoothGatt#GATT_SUCCESS} if the operation succeeds.
     */
    public void onPhyUpdate(BluetoothGatt gatt, int txPhy, int rxPhy, int status) {
    }

    /**
     * Callback triggered as result of {@link BluetoothGatt#readPhy}
     *
     * @param gatt GATT client
     * @param txPhy the transmitter PHY in use. One of {@link BluetoothDevice#PHY_LE_1M},
     *             {@link BluetoothDevice#PHY_LE_2M}, and {@link BluetoothDevice#PHY_LE_CODED}.
     * @param rxPhy the receiver PHY in use. One of {@link BluetoothDevice#PHY_LE_1M},
     *             {@link BluetoothDevice#PHY_LE_2M}, and {@link BluetoothDevice#PHY_LE_CODED}.
     * @param status Status of the PHY read operation.
     *                  {@link BluetoothGatt#GATT_SUCCESS} if the operation succeeds.
     */
    public void onPhyRead(BluetoothGatt gatt, int txPhy, int rxPhy, int status) {
    }

    /**
     * Callback indicating when GATT client has connected/disconnected to/from a remote
     * GATT server.
     *
     * @param gatt GATT client
     * @param status Status of the connect or disconnect operation.
     *               {@link BluetoothGatt#GATT_SUCCESS} if the operation succeeds.
     * @param newState Returns the new connection state. Can be one of
     *                  {@link BluetoothProfile#STATE_DISCONNECTED} or
     *                  {@link BluetoothProfile#STATE_CONNECTED}
     */
    public void onConnectionStateChange(BluetoothGatt gatt, int status,
                                        int newState) {
    }

    /**
     * Callback invoked when the list of remote services, characteristics and descriptors
     * for the remote device have been updated, ie new services have been discovered.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#discoverServices}
     * @param status {@link BluetoothGatt#GATT_SUCCESS} if the remote device
     *               has been explored successfully.
     */
    public void onServicesDiscovered(BluetoothGatt gatt, int status) {
    }

    /**
     * Callback reporting the result of a characteristic read operation.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#readCharacteristic}
     * @param characteristic Characteristic that was read from the associated
     *                       remote device.
     * @param status {@link BluetoothGatt#GATT_SUCCESS} if the read operation
     *               was completed successfully.
     */
    public void onCharacteristicRead(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic,
                                     int status) {
    }

    /**
     * Callback indicating the result of a characteristic write operation.
     *
     * <p>If this callback is invoked while a reliable write transaction is
     * in progress, the value of the characteristic represents the value
     * reported by the remote device. An application should compare this
     * value to the desired value to be written. If the values don't match,
     * the application must abort the reliable write transaction.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#writeCharacteristic}
     * @param characteristic Characteristic that was written to the associated
     *                       remote device.
     * @param status The result of the write operation
     *               {@link BluetoothGatt#GATT_SUCCESS} if the operation succeeds.
     */
    public void onCharacteristicWrite(BluetoothGatt gatt,
                                      BluetoothGattCharacteristic characteristic, int status) {
    }

    /**
     * Callback triggered as a result of a remote characteristic notification.
     *
     * @param gatt GATT client the characteristic is associated with
     * @param characteristic Characteristic that has been updated as a result
     *                       of a remote notification event.
     */
    public void onCharacteristicChanged(BluetoothGatt gatt,
                                        BluetoothGattCharacteristic characteristic) {
    }

    /**
     * Callback reporting the result of a descriptor read operation.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#readDescriptor}
     * @param descriptor Descriptor that was read from the associated
     *                   remote device.
     * @param status {@link BluetoothGatt#GATT_SUCCESS} if the read operation
     *               was completed successfully
     */
    public void onDescriptorRead(BluetoothGatt gatt, BluetoothGattDescriptor descriptor,
                                 int status) {
    }

    /**
     * Callback indicating the result of a descriptor write operation.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#writeDescriptor}
     * @param descriptor Descriptor that was writte to the associated
     *                   remote device.
     * @param status The result of the write operation
     *               {@link BluetoothGatt#GATT_SUCCESS} if the operation succeeds.
     */
    public void onDescriptorWrite(BluetoothGatt gatt, BluetoothGattDescriptor descriptor,
                                  int status) {
    }

    /**
     * Callback invoked when a reliable write transaction has been completed.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#executeReliableWrite}
     * @param status {@link BluetoothGatt#GATT_SUCCESS} if the reliable write
     *               transaction was executed successfully
     */
    public void onReliableWriteCompleted(BluetoothGatt gatt, int status) {
    }

    /**
     * Callback reporting the RSSI for a remote device connection.
     *
     * This callback is triggered in response to the
     * {@link BluetoothGatt#readRemoteRssi} function.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#readRemoteRssi}
     * @param rssi The RSSI value for the remote device
     * @param status {@link BluetoothGatt#GATT_SUCCESS} if the RSSI was read successfully
     */
    public void onReadRemoteRssi(BluetoothGatt gatt, int rssi, int status) {
    }

    /**
     * Callback indicating the MTU for a given device connection has changed.
     *
     * This callback is triggered in response to the
     * {@link BluetoothGatt#requestMtu} function, or in response to a connection
     * event.
     *
     * @param gatt GATT client invoked {@link BluetoothGatt#requestMtu}
     * @param mtu The new MTU size
     * @param status {@link BluetoothGatt#GATT_SUCCESS} if the MTU has been changed successfully
     */
    public void onMtuChanged(BluetoothGatt gatt, int mtu, int status) {
    }

    /**
     * Callback indicating the connection parameters were updated.
     *
     * @param gatt GATT client involved
     * @param interval Connection interval used on this connection, 1.25ms unit. Valid
     *            range is from 6 (7.5ms) to 3200 (4000ms).
     * @param latency Slave latency for the connection in number of connection events. Valid
     *            range is from 0 to 499
     * @param timeout Supervision timeout for this connection, in 10ms unit. Valid range is
     *            from 10 (0.1s) to 3200 (32s)
     * @param status {@link BluetoothGatt#GATT_SUCCESS} if the connection has been updated
     *                successfully
     * @hide
     */
    public void onConnectionUpdated(BluetoothGatt gatt, int interval, int latency, int timeout,
                                    int status) {
    }
}