ScanResult

CHANNEL_WIDTH_160MHZ

int CHANNEL_WIDTH_160MHZ

AP Channel bandwidth is 160 MHZ

Constant Value: 3 (0x00000003)

CHANNEL_WIDTH_20MHZ

int CHANNEL_WIDTH_20MHZ

AP Channel bandwidth is 20 MHZ

Constant Value: 0 (0x00000000)

CHANNEL_WIDTH_40MHZ

int CHANNEL_WIDTH_40MHZ

AP Channel bandwidth is 40 MHZ

Constant Value: 1 (0x00000001)

CHANNEL_WIDTH_80MHZ

int CHANNEL_WIDTH_80MHZ

AP Channel bandwidth is 80 MHZ

Constant Value: 2 (0x00000002)

CHANNEL_WIDTH_80MHZ_PLUS_MHZ

int CHANNEL_WIDTH_80MHZ_PLUS_MHZ

AP Channel bandwidth is 160 MHZ, but 80MHZ + 80MHZ

Constant Value: 4 (0x00000004)

BSSID

String BSSID

The address of the access point.

SSID

String SSID

The network name.

capabilities

String capabilities

Describes the authentication, key management, and encryption schemes supported by the access point.

centerFreq0

int centerFreq0

Not used if the AP bandwidth is 20 MHz If the AP use 40, 80 or 160 MHz, this is the center frequency (in MHz) if the AP use 80 + 80 MHz, this is the center frequency of the first segment (in MHz)

centerFreq1

int centerFreq1

Only used if the AP bandwidth is 80 + 80 MHz if the AP use 80 + 80 MHz, this is the center frequency of the second segment (in MHz)

channelWidth

int channelWidth

AP Channel bandwidth; one of CHANNEL_WIDTH_20MHZ, CHANNEL_WIDTH_40MHZ, CHANNEL_WIDTH_80MHZ, CHANNEL_WIDTH_160MHZ or CHANNEL_WIDTH_80MHZ_PLUS_MHZ.

frequency

int frequency

The primary 20 MHz frequency (in MHz) of the channel over which the client is communicating with the access point.

level

int level

The detected signal level in dBm, also known as the RSSI.

Use calculateSignalLevel(int, int) to convert this number into an absolute signal level which can be displayed to a user.

operatorFriendlyName

CharSequence operatorFriendlyName

Indicates passpoint operator name published by access point.

timestamp

long timestamp

timestamp in microseconds (since boot) when this result was last seen.

venueName

CharSequence venueName

Indicates venue name (such as 'San Francisco Airport') published by access point; only available on passpoint network and if published by access point.

is80211mcResponder

boolean is80211mcResponder ()

isPasspointNetwork

boolean isPasspointNetwork ()

toString

String toString ()

Returns a string representation of the object. In general, the toString method returns a string that "textually represents" this object. The result should be a concise but informative representation that is easy for a person to read. It is recommended that all subclasses override this method.

The toString method for class Object returns a string consisting of the name of the class of which the object is an instance, the at-sign character `@', and the unsigned hexadecimal representation of the hash code of the object. In other words, this method returns a string equal to the value of:

 getClass().getName() + '@' + Integer.toHexString(hashCode())