Most visited

Recently visited

Results for

Added in API level 23

Summary: Constants | Ctors | Methods | Inherited Methods | [Expand All]

SyncParams

public final class SyncParams
extends Object

java.lang.Object
↳	android.media.SyncParams

Structure for common A/V sync params. Used by MediaSync {link MediaSync#getSyncParams()} and {link MediaSync#setSyncParams(SyncParams)} to control A/V sync behavior.

audio adjust mode: select handling of audio track when changing playback speed due to sync.

AUDIO_ADJUST_MODE_DEFAULT: System will determine best handling.
AUDIO_ADJUST_MODE_STRETCH: Change the speed of audio playback without altering its pitch.
AUDIO_ADJUST_MODE_RESAMPLE: Change the speed of audio playback by resampling the audio.

sync source: select clock source for sync.

SYNC_SOURCE_DEFAULT: System will determine best selection.
SYNC_SOURCE_SYSTEM_CLOCK: Use system clock for sync source.
SYNC_SOURCE_AUDIO: Use audio track for sync source.
SYNC_SOURCE_VSYNC: Syncronize media to vsync.

tolerance: specifies the amount of allowed playback rate change to keep media in sync with the sync source. The handling of this depends on the sync source, but must not be negative, and must be less than one.

frameRate: initial hint for video frame rate. Used when sync source is vsync. Negative values can be used to clear a previous hint.

Summary

Constants
`int`	`AUDIO_ADJUST_MODE_DEFAULT` System will determine best handling of audio for playback rate adjustments.
`int`	`AUDIO_ADJUST_MODE_RESAMPLE` Resample audio when playback rate must be adjusted.
`int`	`AUDIO_ADJUST_MODE_STRETCH` Time stretch audio when playback rate must be adjusted.
`int`	`SYNC_SOURCE_AUDIO` Use audio track for sync source.
`int`	`SYNC_SOURCE_DEFAULT` Use the default sync source (default).
`int`	`SYNC_SOURCE_SYSTEM_CLOCK` Use system monotonic clock for sync source.
`int`	`SYNC_SOURCE_VSYNC` Use vsync as the sync source.

Public constructors
`SyncParams()`

Public methods
`SyncParams`	`allowDefaults()` Allows defaults to be returned for properties not set.
`int`	`getAudioAdjustMode()` Retrieves the audio adjust mode.
`float`	`getFrameRate()` Retrieves the video frame rate hint.
`int`	`getSyncSource()` Retrieves the sync source.
`float`	`getTolerance()` Retrieves the tolerance factor.
`SyncParams`	`setAudioAdjustMode(int audioAdjustMode)` Sets the audio adjust mode.
`SyncParams`	`setFrameRate(float frameRate)` Sets the video frame rate hint to be used.
`SyncParams`	`setSyncSource(int syncSource)` Sets the sync source.
`SyncParams`	`setTolerance(float tolerance)` Sets the tolerance.

Inherited methods

From class


  
    java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long millis, int nanos)` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object, or some other thread interrupts the current thread, or a certain amount of real time has elapsed.
`final void`	`wait(long millis)` Causes the current thread to wait until either another thread invokes the `notify()` method or the `notifyAll()` method for this object, or a specified amount of time has elapsed.
`final void`	`wait()` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object.

Constants

AUDIO_ADJUST_MODE_DEFAULT

Added in API level 23

int AUDIO_ADJUST_MODE_DEFAULT

System will determine best handling of audio for playback rate adjustments.

Used by default. This will make audio play faster or slower as required by the sync source without changing its pitch; however, system may fall back to some other method (e.g. change the pitch, or mute the audio) if time stretching is no longer supported for the playback rate.

Constant Value: 0 (0x00000000)

AUDIO_ADJUST_MODE_RESAMPLE

Added in API level 23

int AUDIO_ADJUST_MODE_RESAMPLE

Resample audio when playback rate must be adjusted.

This will make audio play faster or slower as required by the sync source by changing its pitch (making it lower to play slower, and higher to play faster.)

See also:

Constant Value: 2 (0x00000002)

AUDIO_ADJUST_MODE_STRETCH

Added in API level 23

int AUDIO_ADJUST_MODE_STRETCH

Time stretch audio when playback rate must be adjusted.

This will make audio play faster or slower as required by the sync source without changing its pitch, as long as it is supported for the playback rate.

See also:

Constant Value: 1 (0x00000001)

SYNC_SOURCE_AUDIO

Added in API level 23

int SYNC_SOURCE_AUDIO

Use audio track for sync source. This requires audio data and an audio track.

See also:

ERROR(/AudioTrack#getTimeStamp)

Constant Value: 2 (0x00000002)

SYNC_SOURCE_DEFAULT

Added in API level 23

int SYNC_SOURCE_DEFAULT

Use the default sync source (default). If media has video, the sync renders to a surface that directly renders to a display, and tolerance is non zero (e.g. not less than 0.001) vsync source is used for clock source. Otherwise, if media has audio, audio track is used. Finally, if media has no audio, system clock is used.

Constant Value: 0 (0x00000000)

SYNC_SOURCE_SYSTEM_CLOCK

Added in API level 23

int SYNC_SOURCE_SYSTEM_CLOCK

Use system monotonic clock for sync source.

See also:

nanoTime()

Constant Value: 1 (0x00000001)

SYNC_SOURCE_VSYNC

Added in API level 23

int SYNC_SOURCE_VSYNC

Use vsync as the sync source. This requires video data and an output surface that directly renders to the display, e.g. SurfaceView

This mode allows smoother playback experience by adjusting the playback speed to match the vsync rate, e.g. playing 30fps content on a 59.94Hz display. When using this mode, the tolerance should be set to greater than 0 (e.g. at least 1/1000), so that the playback speed can actually be adjusted.

This mode can also be used to play 25fps content on a 60Hz display using a 2:3 pulldown (basically playing the content at 24fps), which results on better playback experience on most devices. In this case the tolerance should be at least (1/24).

See also:

Constant Value: 3 (0x00000003)

Public constructors

SyncParams

Added in API level 23

SyncParams ()

Public methods

allowDefaults

Added in API level 23

SyncParams allowDefaults ()

Allows defaults to be returned for properties not set. Otherwise a IllegalArgumentException exception is raised when getting those properties which have defaults but have never been set.

Returns
`SyncParams`	this `SyncParams` instance.

getAudioAdjustMode

Added in API level 23

int getAudioAdjustMode ()

Retrieves the audio adjust mode.

Returns
`int`	audio adjust mode

Throws
`IllegalStateException`	if the audio adjust mode is not set.

getFrameRate

Added in API level 23

float getFrameRate ()

Retrieves the video frame rate hint.

Returns
`float`	frame rate factor. A non-negative number representing the maximum deviation of the playback rate from the playback rate set. (`abs(actual_rate - set_rate) / set_rate`), or a negative number representing the desire to clear a previous hint using these params.

Throws
`IllegalStateException`	if frame rate is not set.

getSyncSource

Added in API level 23

int getSyncSource ()

Retrieves the sync source.

Returns
`int`	sync source

Throws
`IllegalStateException`	if the sync source is not set.

getTolerance

Added in API level 23

float getTolerance ()

Retrieves the tolerance factor.

Returns
`float`	tolerance factor. A non-negative number representing the maximum deviation of the playback rate from the playback rate set. (`abs(actual_rate - set_rate) / set_rate`)

Throws
`IllegalStateException`	if tolerance is not set.

setAudioAdjustMode

Added in API level 23

SyncParams setAudioAdjustMode (int audioAdjustMode)

Sets the audio adjust mode.

Returns
`SyncParams`	this `SyncParams` instance.

setFrameRate

Added in API level 23

SyncParams setFrameRate (float frameRate)

Sets the video frame rate hint to be used. By default the frame rate is unspecified.

Parameters
`frameRate`	`float`: A non-negative number used as an initial hint on the video frame rate to be used when using vsync as the sync source. A negative number is used to clear a previous hint.

Returns
`SyncParams`	this `SyncParams` instance.

setSyncSource

Added in API level 23

SyncParams setSyncSource (int syncSource)

Sets the sync source.

Returns
`SyncParams`	this `SyncParams` instance.

setTolerance

Added in API level 23

SyncParams setTolerance (float tolerance)

Sets the tolerance. The default tolerance is platform specific, but is never more than 1/24.

Parameters
`tolerance`	`float`: A non-negative number representing the maximum deviation of the playback rate from the playback rate set. (`abs(actual_rate - set_rate) / set_rate`)

Returns
`SyncParams`	this `SyncParams` instance.

Throws
	if the tolerance is negative, or not less than one

Interfaces

Classes

Exceptions

Most visited

Recently visited

Results for

SyncParams

Summary

Constants

Public constructors

Public methods

Inherited methods

Constants

AUDIO_ADJUST_MODE_DEFAULT

AUDIO_ADJUST_MODE_RESAMPLE

AUDIO_ADJUST_MODE_STRETCH

SYNC_SOURCE_AUDIO

SYNC_SOURCE_DEFAULT

SYNC_SOURCE_SYSTEM_CLOCK

SYNC_SOURCE_VSYNC

Public constructors

SyncParams

Public methods

allowDefaults

getAudioAdjustMode

getFrameRate

getSyncSource

getTolerance

setAudioAdjustMode

setFrameRate

setSyncSource

setTolerance